Dongguan Ampfort Electronics Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 100,000,000 PIECES PER MONTH |
| Delivery Time | 10 workdays |
| Packaging Details | Bulk,500pcs per bag |
| Name | NTC SMD Thermistor |
| Total length | 75mm |
| Width | 4.5mm |
| Thickness | 0.9mm max |
| Color | Yellow |
| Dissipation factor | Approx. 0.7mW/℃(in air) |
| Thermal time constant. | Approx. 5.0s(in air) |
| Max power rating. | 3.5mW(at 25℃) |
| Operating temperature range | -40 ~ 100℃ |
| Encapsulation | DIP,Radial |
| Brand Name | AMPFORT |
| Model Number | 103TJ-075 |
| Certification | REACH,ROHS 3.0 |
| Place of Origin | DONGGUAN,GUANGDONG,CHINA |
View Detail Information
Explore similar products
Original Korea DSC 3PHI 5PHI 3mm 5mm Disc 10K NTC Thermistor
SS Housing 50K 1% Power NTC Thermistor 3950 100MM NTC Probe Temperature Sensor
30k Ohm 15mm Temperature Sensor Chip Epoxy Coated NTC 3950 Thermistor
SMT 4250 NTC Thermistor 10k 1206 100K Negative Temperature Coefficient Resistor
Product Specification
| Payment Terms | T/T | Supply Ability | 100,000,000 PIECES PER MONTH |
| Delivery Time | 10 workdays | Packaging Details | Bulk,500pcs per bag |
| Name | NTC SMD Thermistor | Total length | 75mm |
| Width | 4.5mm | Thickness | 0.9mm max |
| Color | Yellow | Dissipation factor | Approx. 0.7mW/℃(in air) |
| Thermal time constant. | Approx. 5.0s(in air) | Max power rating. | 3.5mW(at 25℃) |
| Operating temperature range | -40 ~ 100℃ | Encapsulation | DIP,Radial |
| Brand Name | AMPFORT | Model Number | 103TJ-075 |
| Certification | REACH,ROHS 3.0 | Place of Origin | DONGGUAN,GUANGDONG,CHINA |
| High Light | 100k Ohm NTC SMD Thermistor ，Epcos NTC SMD Thermistor ，SMD Power NTC Thermistor | ||
Epcos 103AT JT TTC 103 5K 10K 3435 100k Ohm NTC SMD Thermistor Thermal Resistance 75mm
Description Of The NTC SMD Thermistor
The TJ series thermistor features a thickness of less than 500 μm and can be installed in spaces as thin as a credit card. The TJ thermistors also have excellent electrical insulation and can be safely used in environments where they might come in contact with electrodes.
Features Of The NTC SMD Thermistor
High mass-productivity Manufacturing based on a semiconductor technology provides high mass-productivity with fully controlled quality
Toughness and High reliabilityA simple structure means less mechanical joints to assemble. Lead-wires of AWG38 are connected onto Fμ
Thermistor chips directly without any thinner lead-wire.
Precision temperature measurement
±3% in resistance and ±1% in B-value are standard
Micro-mini size
Application Of The NTC SMD Thermistor
Battery packs, IT equipment, mobile devices, LCDs, surface temperature sensors, high sensitivity air temperature sensors
Medical catheters
Guide wires
Testing equipment
Handheld medical devices
Body temperature monitoring
Other applications that require very small probes
Dimensions Of The NTC SMD Thermistor [mm]
Mechanical characteristics Of The NTC SMD Thermistor
| 1) Resistance to soldering heat | The terminals shall be dipped in to a soldering bath having a temperature of 260 ±5℃ to a point 2.0 mm from the body and then be held there for 5 ±1s, the change ratio of the rated zero-power resistance shall be within ±1% of the initial value. |
| 2) Solderability | After dipping the terminal to a depth in a soldering bath of 235 ±5℃ for 2 ±0.5s .Approximately 90% of terminals should be covered with solder uniformly. |
| 3) Free fall | After three times fall to a maple board from 0.75 m high, there shall be no visible damage and the change ratio of the rated zero-power resistance shall be within ±1% of the initial value. |
| 4) Robustness of terminations | After 1N loading weight for 10 ±1s was applied to the wire terminations, there shall be no visible damage and the change ratio of the rated zero-power resistance shall be within ±1% of the initial value. |
Caution Of The NTC SMD Thermistor
• If you plan pressing or pushing the thermistor against an object or inserting it into a tight space please contact AMPFORT sales staff.
• When soldering make sure to avoid contact of the hot part (over 150 ˚C) and the sensor, because this may melt the sensor film.
• When bending the sensor make sure to not apply force on the sensor head (minimum distance from sensor: 3 mm) when fixing it. Additionally, make sure to bend the lead wire with a minimum distance of 7 mm from the sensor head.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter
Year Established:
2014
Total Annual:
1850000-2340000
Employee Number:
51~200
Ecer Certification：
Verified Supplier
Dongguan Ampfort Electronics Co., Ltd. is a high-tech enterprise specializing in R&D, manufacturing and sales, committed to becoming a comprehensive supplier of circuit protection components. We introduced advanced quality system,management systems and high-precision automation equipm... Dongguan Ampfort Electronics Co., Ltd. is a high-tech enterprise specializing in R&D, manufacturing and sales, committed to becoming a comprehensive supplier of circuit protection components. We introduced advanced quality system,management systems and high-precision automation equipm...
Get in touch with us
Leave a Message, we will call you back quickly!