Imitation Wood Grain Thermoset Powder Coating For Coil Transfer

Product Specification

Imitation Wood Grain, ISO90001 Special Thermoset Powder Coating for Coil Transfer

◎ Introduction

Coil transfer powder coating is a thermosetting powder coating with excellent weather resistance based on saturated carboxyl polyester resin and TGIC curing agent as the main base material. It is specially used for base film spraying in thermal transfer technology. After the coil powder coating is rapidly cured, through thermal transfer technology, various appearance effects can be formed on the surface of the base film, such as imitation wood grain, marble grain, transfer grain or hand feeling, etc. The grain is clear and the permeability is good, easy to tear paper, good flexibility, bending resistance, the obtained coil transfer powder coating pre-coated board is suitable for workshops, aluminum profiles, metal furniture, security doors or home decoration and other products.

The special powder coating for coil transfer that our company has developed for three years has been successfully applied in a Foshan Plate Company. After the spraying is completed, it can be directly transferred, and the coil is transferred to the powder coating printing plate. The production speed of the product far exceeds the production speed of similar painting in Europe and the United States, reaching the domestic leading and international advanced level.

This product adopts a number of innovative technologies to solve a series of technical problems such as rapid curing and rapid transfer of coil powder coatings. Compared with traditional thermal transfer powder coatings, it requires 180”-240” transfer time, and powder coating only needs 20"-40" transfer time, the transfer time is short and the effect is clear. The product performance not only meets the technical standards of the coil industry, but also is superior to the current paint coating performance in key properties such as bending resistance, acid and alkali resistance, hardness, and aging resistance.

◎ Key Properties

Coil transfer special powder coating has the characteristics of simple construction, strong decoration, one-time spraying, clear transfer effect, easy to tear paper, etc. Compared with solvent-based transfer coating, the spraying has high utilization rate, is not easy to scratch, is environmentally friendly, and has no VOC emission, energy saving, excellent comprehensive coating performance.

The coating is beautiful, with good texture and scratch resistance, and the thickness of one spray can reach 25-80μm

Excellent post-processing properties such as T-bend and impact resistance.

Excellent quick transfer effect, clear pattern, beautiful texture and strong decoration.

◎ Application Field

1. This product can be used for coiled steel and coiled aluminum color-coated panels. Because of its convenient installation, high strength, easy cleaning, and impact resistance, it is widely used in workshops, prefab houses, residential prefabricated components, roofs, ceiling curtain walls, containers, isolation barriers , household appliances, furniture, containers, door frames, etc.

2. Coil transfer powder coatings of 30m/min-120m/min can be designed according to requirements.

3. According to the appearance requirements, the transfer powder coating can be designed with different effects such as leveling, sand pattern and touch.

◎ Specifications

Appearance: Powder solid, after electrostatic spraying and baking, the coating is leveling

Film Thickness: ≥ 80μm

Specific Gravity: 1.2~1.7 g/cm³

Storage: Stored for 6 months in a dry condition below 30°C

◎ Coating Reference

Spraying Method: Electrostatic spraying

Preheating Temperature: The workpiece can be preheated according to the workpiece condition and coating requirements.

Spraying Voltage: 50-80Kv

Curing Conditions: It is recommended to bake for 20-40" when the surface temperature of the workpiece reaches 260°C for curing, which can be adjusted according to the on-site curing conditions.

◎ Technical index

◎ Transportation and Storage

Carton packaging, net weight 20 or 25kg.

Non-dangerous goods, no special transportation requirements.

Store in a cool, dry place below 30°C.

Shelf Life: 6 months.

◎ Application Examples