Ruixin Energy Equipmnet
| Payment Terms | T/T |
| Supply Ability | 1 set 3 weeks |
| Delivery Time | 3-4 weeks |
| Packaging Details | Wooden Box |
| Name | 10K Quick Test Sub Wireline Pressure Control Equipment |
| Material | Alloy Steel&Nickel Alloy |
| Connection Type | O&B |
| ID | 2.5inch ID -4inch ID |
| Function | allows for only the joint that was broken to be tested, without filling the whole lubricator system |
| Work Pressure | 3k 5k 10k 15k |
| Service | Standard&H2S |
| Brand Name | Ruixin |
| Model Number | 2.5inch ID -4inch ID |
| Certification | API |
| Place of Origin | China Baoji |
View Detail Information
Explore similar products
Steel Pressure Control Slickline Stuffing Box 16 Inch
8 Inch Wireline Torsion Tester For Torsion Experiment Instrument
Pump In Tee Wireline Pressure Control Equipment API Standard
4ft 6ft 8ft Lightweight Lubricator Wireline And Slickline Tools
Product Specification
| Payment Terms | T/T | Supply Ability | 1 set 3 weeks |
| Delivery Time | 3-4 weeks | Packaging Details | Wooden Box |
| Name | 10K Quick Test Sub Wireline Pressure Control Equipment | Material | Alloy Steel&Nickel Alloy |
| Connection Type | O&B | ID | 2.5inch ID -4inch ID |
| Function | allows for only the joint that was broken to be tested, without filling the whole lubricator system | Work Pressure | 3k 5k 10k 15k |
| Service | Standard&H2S | Brand Name | Ruixin |
| Model Number | 2.5inch ID -4inch ID | Certification | API |
| Place of Origin | China Baoji | ||
| High Light | 10K 15k Quick Test Sub ，Wireline Quick Test Sub ，10K Wireline Pressure Control Equipment | ||
10K 15k Quick Test Sub Wireline Pressure Control Equipment
Ⅰ. Introduction
Quick Test Sub is designed to save rig time while pressure testing a lubricator rig up, before exposing it to well pressure. When multiple wireline runs are required, the lubricator has to be tested each time the bottom connection is broken, and much time can be lost. After performing the first pressure testing of the whole string, subsequent pressure test can be made using the Quick Test Sub to verify the integrity of the joint disconnected, rather than testing the whole lubricator assembly. This is done by connecting a small hand pump to the Quick Test Sub and testing the two O-Rings seals from outside.The Quick Test Sub s installed either above or below the BOP and becomes the joint that is disconnected each time to insert and retrieve tools from the well
II. General Technical Parameters
OTIS Quick Union
| Bore | Work Pressure | Service | Connection | Seal Dia. |
| 2.5＂ | 5K 10K | Std H2S | 5＂-4ACME | 3.5＂ |
| 3＂ | 5K | H2S | 5＂-4ACME | 3.5＂ |
| 3＂ | 10K | Std | 5＂-4ACME | 3.5＂ |
| 3＂ | 10K | Std H2S | 5-3/4＂-4ACME | 4＂ |
| 2.5＂ | 15K | H2S | 5-3/4＂-4ACME | 4＂ |
| 4＂ | 5K 10K | Std | 6-1/2＂-4ACME | 4.75＂ |
| 3＂ | 15K | Std H2S | 7-1/2＂-4ACME | 5.5＂ |
| 5＂ | 5K | Std H2S | 8-1/4＂-4ACME | 6.188＂ |
| 4＂ | 10K | Std H2S | 8-3/8＂-4ACME | 5.25＂ |
| 5＂ | 5K 10K | Std H2S | 9＂-4ACME | 6.75＂ |
| 4＂ | 15K | Std H2S | 9-1/2＂-4ACME | 6.25＂ |
| 6.38＂ | 10K | Std H2S | 11-1/2＂-4ACME | 8.25＂ |
Ⅲ. Design Features
The Wireline Quick Test Sub is fitted between the lower lubricator and the BOP, and becomes the joint that is broken out between wireline runs. It looks and operates like any other quick union, but has two “O” ring seals instead of one. The pressure testing takes place between these two seals and effectively confirms the integrity of both. The upper-most of the two seals is of slightly larger diameter than the lower, facilitating
easy make/break of the connection.
IV. Maintenance
After using this product every time, check whether the thread,Sealing surface and O-ring are damaged. If everything is normal, apply lubricating grease to the thread and sealing ring, and take protective wire for storage. If any damage is found to the O-ring or sealing surface, the
manufacturer shall be contacted in time for repair and replacement.
Welcome to contact us at any time.
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2012
Total Annual:
200-500
Employee Number:
One~Fifty
Ecer Certification：
Verified Supplier
Ruixin Energy Equipment Ruixin Energy Equipment is slickline manufacturer focused on wireline PCE , wireline tools, coiled tubing tools, etc.. Our factory and technology R & D center is Located in the national technology enterprise incubation industry park - 401B, High-... Ruixin Energy Equipment Ruixin Energy Equipment is slickline manufacturer focused on wireline PCE , wireline tools, coiled tubing tools, etc.. Our factory and technology R & D center is Located in the national technology enterprise incubation industry park - 401B, High-...
Get in touch with us
Leave a Message, we will call you back quickly!