Hubei Fotma Machinery Co., Ltd.
| Payment Terms | T/T, L/C, Western Union, PayPal |
| Supply Ability | 2MT / Month |
| Delivery Time | 15-20 Days |
| Packaging Details | Plastic Spools, Paper Cartons |
| Mo Purity | 99.95% |
| Surface | Black |
| Diameter | 0.18mm, 0.20mm |
| Spool Size | Customized as per the Cutting Machines |
| Density | 10.2 g/cc |
| Application | Wire Cutting |
| Brand Name | FOTMA |
| Model Number | Mo-1 Mo-2 |
| Certification | ISO 9001:2008 |
| Place of Origin | China |
View Detail Information
Explore similar products
0.18mm 0.2mm Diamond Edm Molybdenum Cutting Wire 10.15g/cm3
99.95% MoLa Molybdenum Wires For Lamp Filaments 0.01mm - 0.08mm
99.95% 0.05mm Pure Molybdenum Wire
Ground 3.0mm Molybdenum Filament
Product Specification
| Payment Terms | T/T, L/C, Western Union, PayPal | Supply Ability | 2MT / Month |
| Delivery Time | 15-20 Days | Packaging Details | Plastic Spools, Paper Cartons |
| Mo Purity | 99.95% | Surface | Black |
| Diameter | 0.18mm, 0.20mm | Spool Size | Customized as per the Cutting Machines |
| Density | 10.2 g/cc | Application | Wire Cutting |
| Brand Name | FOTMA | Model Number | Mo-1 Mo-2 |
| Certification | ISO 9001:2008 | Place of Origin | China |
| High Light | 0.18mm Molybdenum Heating Wire ，Lanthanum Cutting Molybdenum Heating Wire ，0.18mm Moly Wire For EDM | ||
Factory price high purity 99.95% 0.18mm Diamond Edm Molybdenum Wire 0.18mm / 0.20mm For Wire Cutting
Molybdenum wire for wire cutting has high tensile strength, good stability, good electric discharge, low elongation, high wire diameter consistent. Molybdenum cutting wire is not easy to break and has long servicing life. Molybdenum wire cutting can the cut metals in smooth finish, high cutting speed, and high precision. The wire is vacuum packed in order to prevent oxidation.
Molybdenum wire has outstanding electrical and heat-conducting capabilities and relatively high tensile strength. Thermal conductivity is approximately 50% higher than that of steel, iron or nickel alloys. It consequently finds wide usage as heat sinks. Its electrical conductivity is the highest of all refractory metals, about one third that of copper, but higher than nickel, platinum, or mercury. The coefficient of thermal expansion of molybdenum plots almost linearly with temperature over a wide range. This characteristic, in combination will raise heat-conducting capabilities, accounts for its use in bimetal thermocouples.
Before pressing new moly wire and processing, let the machine run five-ten minutes, the cutting effects will be better.
Introduction of Molybdenum Wires for Wire Cutting:
Purity: > =99.95%
Characteristic:
Melting Point: 2618 Degrees Celsius
Boiling Point: 5560 Degrees Celsius
Working Temperature: 1700 Degrees Celsius
Density: 10.15g/cm3
Standard: ASTM B387
Certificate: ISO9001:2008
Product Feature: High melting point, High-density, high temperature oxidation resistance, long service life, resistance to corrosion
Applications of Molybdenum Cutting Wires:
Circles the filament core, the support wire, the lead-out wire, the electronics grid and so on.
The support silk, the lead-out wire guide rod, the electricity vacuum components, the heater element, the high temp electric resistance furnace gives off heat the material and so on.
For EDM wire cut, high tensile strength, small elongation ratio, good stability, high cutting precision.
Weight of Molybdenum Wires:
| Designation | Supply state | Diameter(mm) | Suggest mininum |
|
Molybdenum Mo1 Mo2 |
Hot working | 0.12-0.3 | 100g |
| 0.3-0.6 | 60g | ||
| 0.6-1.0 | 80g | ||
| 1.0-2.5 | 100g |
Composition of Molybdenum Wire:
| Grade | The impurity content is not more than % | |||||||
| Fe | Ni | Al | Si | Mg | C | N | O | |
| Mo-1 | 0.01 | 0.005 | 0.002 | 0.01 | 0.005 | 0.01 | 0.003 | 0.008 |
| Mo-2 | 0.01 | 0.005 | 0.005 | 0.01 | 0.005 | 0.01 | 0.003 | 0.02 |
Sizes and Tolerance of Molybdenum Wires:
| Diameter(μm) | Weight/200mmmg | Weight/200mm tolerance | Diameter tolerance % |
| 30≤d≤40 | 1.47 -2.61 | ±3.0 | ---- |
| 40<d≤100 | >2.61 – 16.33 | ±3.0 | 7.0 |
| 100<d≤400 | >16.33 – 256.2 | ±3.0 | ---- |
| 400<d≤600 | ---- | ---- | ±2.5 |
| 600<d≤2500 | ----- | ----- | ±2.0 |
Picture Show:
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2004
Total Annual:
5000000-8000000
Employee Number:
50~100
Ecer Certification：
Active Member
Hubei Fotma Machinery Co.Ltd established in 2004 as a combined group engaged into manufacturing and exporting of Non-Ferrous Metals, Agricultural Machinery and Instruction Machinery etc. In 2005, our factory established in Zigong, Sichuan P.R., which is a professional manufacturer of ... Hubei Fotma Machinery Co.Ltd established in 2004 as a combined group engaged into manufacturing and exporting of Non-Ferrous Metals, Agricultural Machinery and Instruction Machinery etc. In 2005, our factory established in Zigong, Sichuan P.R., which is a professional manufacturer of ...
Get in touch with us
Leave a Message, we will call you back quickly!