Wuxi Hanyu power equipment co.,ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 100000pieces/month. |
| Delivery Time | 15-35days |
| Packaging Details | CASE |
| Type | Jaw Turnbuckle Take Up |
| Units | US Type Turnbuckle |
| Material | Steel |
| Finish | Plain |
| Diameter | 3/8" |
| Take-up | 6" |
| Brand Name | HANYU |
| Model Number | P-US-T |
| Certification | ISO9001 |
| Place of Origin | China |
View Detail Information
Explore similar products
Powerline Tools TYSFS1 Four Conductor Bundle Line Cart Rated Load 1.5kN
Powerline Tools TYSFT1 Bicycle For Three Conductor Bundle Line
Powerline Tools TYSFT1 Three Conductor Bundle Line Cart Rated Load 1kN
Steel Jaw Turnbuckle Take Up 3/8" Diameter 6" Take-up
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 100000pieces/month. |
| Delivery Time | 15-35days | Packaging Details | CASE |
| Type | Jaw Turnbuckle Take Up | Units | US Type Turnbuckle |
| Material | Steel | Finish | Plain |
| Diameter | 3/8" | Take-up | 6" |
| Brand Name | HANYU | Model Number | P-US-T |
| Certification | ISO9001 | Place of Origin | China |
| High Light | 3/8 steel jaw turnbuckle ，6 inch take-up turnbuckle ，US type powerline turnbuckle | ||
Powerline Tools P-US-T Domestically Produced Jaw Turnbuckle Take Up
| Product details | |
| Model | P-US-T |
| Units | US Type Turnbuckle |
| Category | Turnbuckles An internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each end used for applying and regulating tension. |
| Subcategory | Forged jaw & eye Jaw end fittings consist of a jaw, clevis pin, and cotter pin to attach to connecting components that cannot be opened and eye end fittings are used with connecting components that can be opened and attached to the eye. |
| Material | Steel A low carbon steel for general use. |
| Finish | Plain Unplated finish. |
| Domestically produced | Yes |
| Diameter | 3/8" |
| Take-up | 6" |
| Thread count | 16 |
| Eye inside diameter | 51/64" |
| Eye outside diameter | 1-17/32" |
| Jaw inside length | 7/8" |
| Jaw opening width | 1/2" |
| Pin diameter min | 5/16" |
| Overall length | 11-7/8" |
| Rated Capacity | 1,040lbs |
Take up slack with a Crosby HG228 jaw/jaw Turnbuckles are manufactured with the end fittings quenched and tempered. The jaw allows connection to rigging hardware that can not be opened, an eye bolt for instance.
Used to apply tension to wire ropes such as guy lines, median barriers, architectural wire ropes or adjust the length of sling legs in multiple leg lifting applications.
The bodies are heat treated by normalizing, the finish is then hot dip galvanized for long term corrosion resistance and long service life.
Used for for Lifting, Holding And Tensioning the HG228 range meets or exceeds all requirements of ASME B30.26.Recommended for a straight or in-line pull only.
We don't know when or if this item will be back in stock.
Crosby products meet or exceed all requirements of ASME B30.26
Hot Dip galvanized steel
Turnbuckles recommended for straight or in-line pull only
Company Details
Business Type:
Manufacturer
Total Annual:
300-500
Employee Number:
150~200
Ecer Certification：
Verified Supplier
Since its establishment, Wuxi Hanyu Power Equipment Co., Ltd. has been manufacturing and producing with a complete and scientific quality management system. We have complete production equipment and precise testing instruments. Hanyu is committed to using strict management, excellent quality and goo... Since its establishment, Wuxi Hanyu Power Equipment Co., Ltd. has been manufacturing and producing with a complete and scientific quality management system. We have complete production equipment and precise testing instruments. Hanyu is committed to using strict management, excellent quality and goo...
Get in touch with us
Leave a Message, we will call you back quickly!