Product Specification

Easily Assembled Green Color 2.4m High W Section Palisade Fencing

Product Description

Steel palisade fence, the most popular solution to premise protection, performs excellently to provide a high level of security and assault resistance. It's made of mild steel grades and steel grades to be considered shall have a minimum yield strength in excess of 235 N/mm2, unless the design permits lower strength materials to be employed.

Palisade Pales – the most popular form of palisade pale currently on the market is the W pale. It is called a W pale because the shape of the pale looks like a W compared to traditional rounded pale, which is referred to as a D pale. Due to its re-enforcing shape the W pale is more economical as you can get the same strength, whilst using lower gauge steel. This makes the palisade fence cheaper than one that uses the old-style D pale. Having said this the D pale palisade fence is still extremely popular in a few environments. D pale palisade fencing is commonly specified for government projects, such as around prisons and schools. It is also very important if you are repairing a palisade fence, or extending one, that you continue to use the same palisade pales, so that it does not look out of place. As most palisade fenced traditionally used D pales they continue to be popular for these types of fencing projects.

Palisade Pale Heads – we most commonly supply palisade fencing with a triple point splayed head. This is because palisade fencing is most commonly used as a perimeter security fence. Therefore one of its main requirements is to deter and stop intruders. The triple point splayed pale head is the most effective at providing a high security fence line due to its fierce looking nature. The splayed sharp steel head is incredibly difficult & dangerous to climb over. We also offer rounded and round & notched pale heads upon request. These palisade pale heads are still sharp steel heads, that present a formidable fencing line, however they cover less of the fence line as they are not splayed.

Specification

Material: mild steel, low carbon steel, stainless steel, hot rolled or cold rolled.

Fence length: 2.75 m.

Fence height: 1.2 m to 3.6 m.

RSJ post: 102 × 44 mm for fences below 2.7 mm, 127 × 66 mm for fences above 2.7 mm.

Square post: 50 mm × 50 mm × 1.6 mm thickness or 76 mm × 76 mm × 1.6 mm thickness.

Pales height: 1.2 m to 3.6 m.

Pales thickness: 2 mm to 5 mm.

Anti-corrosion surface treatments: hot dipped galvanized or PVC coated with various colors (green, blue, yellow, red, shown as the picture above) for higher rust resistance.

Drawing

Advantages

HDG or powder coated surface for choice.

RAL colors for choice.

Different pale and rail types.

Suitable for both commercial or industrial applications.

Special discount for large orders and projects.

Corrosive resistant

Application

Our fencing products provide protection and security for a number of different places and outdoor environments. For example, our steel palisade fencing would be perfect for surrounding:

Schools

Hospitals

Factories

Building yards

Railway Infrastructure

The Power Networks

Recreational grounds

Why choose us?

Our Palisade Fencing gives you an extremely cost effective and formidable permanent security barrier, which acts as a significant deterrent to intruders. It provides a valuable layer of protection for goods from damage or theft. All of our palisade fencing is manufactured in the UK and meets the toughest of demands. Quality is incredibly important when undertaking significant capital expenditure on a security fence that should last over 10 years. The last thing you want is to be replacing palisade fence panels after only 5 - 10 years.

Each palisade bay is Galvanised to BS EN ISO1461 as standard. We can then powder coat the palisade fencing to meet your requirements, offering two layers of protection.