Product Description:

 
Petrol Engine Assembly                                                                                                                                          
OE number: LR106166
Applicable vehicle type: For Land Rover
 
 

Automobile engine fault detection and repair

Chapter One: Startup Faults

No Response

Diagnosis: Measure battery voltage (below 10V indicates discharge), check terminal condition, and test starter motor continuity.

Repair: Charge battery / replace battery; clean and tighten terminals; replace starter switch or assembly.

Abnormal Noise but Does Not Start

Diagnosis: Inspect starter motor and flywheel ring gear wear, check timing belt/chains for breaks.

Repair: Replace worn parts; replace timing belt/chain and align.

Dies After Starting

Diagnosis: Measure fuel pressure (no pressure indicates pump failure), check fuel filter status, spark plugs/ignition coils.

Repair: Replace fuel pump/filter; replace spark plugs or ignition coils.

Chapter Two: Running Faults

Unstable Idle

Diagnosis: Check for air intake leaks, throttle body carbon buildup, and injector spray volume differences.

Repair: Seal leak areas; clean throttle body; clean/replace injectors.

Insufficient Power

Diagnosis: Inspect air filter, turbocharger pressure, cylinder compression pressure.

Repair: Replace air filter; repair/replace turbocharger; replace piston rings or grind valves.

Overheating

Diagnosis: Check coolant level, water pump operation, radiator blockage, thermostat condition.

Repair: Top off coolant; replace water pump; clean/replace radiator; replace thermostat.

Abnormal Noise

Diagnosis: Listen and locate (knocking check fuel grade/cylinder clearance; valve noise check clearance; bearing noise check bushing).

Repair: Use high-grade fuel / bore cylinder and replace piston; adjust clearance / replace pushrod; replace bearings.

Vibration

Diagnosis: Read misfire data (corresponding cylinder component fault), check engine mount aging.

Repair: Replace misfiring cylinder spark plug/injector; replace engine mounts.

Chapter Three: Fuel and Lubrication System Faults

High Fuel Consumption

Diagnosis: Check injector leakage, fuel pressure, air filter condition.

Repair: Replace injectors; adjust fuel pressure; replace air filter; repair mechanical resistance components.

Abnormal Oil Pressure

Diagnosis: Too low check oil level/oil pump/filter; too high check viscosity/relief valve.

Repair: Add oil / replace pump/filter; replace oil / repair relief valve.

Oil Degradation

Diagnosis: Observe oil condition (black/emulsified/contaminants), measure coolant mix-in.

Repair: Replace oil + filter; replace cylinder gasket and clean oil passages.

Chapter Four: Ignition System Faults

Diagnosis: Use timing light to check ignition timing, measure high-tension wire resistance.

Repair: Adjust timing position; replace aged high-tension wires.

Core Principle: Prioritize simple issues first, inspect easily damaged parts, and have complex faults handled by professionals.

Multiply Brands Auto Parts We Offer:

Why choice us:

1. Industry Experience: 20 years of experience in the auto parts industry, with in-depth market and product knowledge.

2. Professional Team: A team of experienced experts who can professionally answer all customer inquiries about auto parts.

3. Direct Partnerships: Direct partnerships with multiple auto repair shops, offering first-hand industry feedback and technical support.

4. High-Quality Products: Providing high-quality auto parts to ensure reliability and durability.

5. Comprehensive Inventory: A wide range of product lines and ample inventory to meet diverse customer needs.

6. Quick Response: Offering rapid response services to quickly address customer questions and needs.

7. Customized Services: Providing customized part solutions to meet specific vehicle or customer requirements.

8. Technical Support: Offering professional technical support and installation guidance.

9. After-Sales Service: A strong after-sales service network to ensure customers receive necessary support after product use,If you have any questions after receiving the goods, please contact us in time and we will provide the best solution.

10. Price Advantage:Competitive pricing due to long-standing supply chain relationships.

11. Quality Assurance:All products go through strict quality control processes to meet industry standards.

12. Fast Shipping: Over 500000+ in stock, we can ship them in a short time.

Company Profile:

Beijing Huarui Jietong Trading Co., Ltd. has been engaged in the automotive aftermarket for 20 years and is a professional supplier of auto parts. Located in the capital of China, Beijing, we have factories in Beijing, Guangzhou, and Jiangsu, which enable us to meet our customers' demands for quality and quantity in a timely and efficient manner.
 

 
The company primarily focuses on accessories for Land Rover, Jaguar, and Volvo product series, including Air Conditioning Systems, Braking Systems, Driving Systems, Engine Systems, Cooling Systems, Auto Body Systems, Steering Systems, Suspension Systems, Transmission Systems, and other related parts. Facing the trend of economic globalization, our company is committed to bringing better products and services to the world, providing high-quality products and services for domestic and foreign enterprises and customers.
 
We welcome any inquiries and look forward to your contact.
 
 
 

 
 
 
Certifications:
 

 

FAQ: