Sinuo Testing Equipment Co. , Limited
| Payment Terms | L/C, T/T |
| Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days |
| Packaging Details | Standard Exporting Plywood Case |
| Applied standard | IEC 62368-1 |
| Clause | Y.3.3 |
| Temperature range | RT＋10℃～50℃ |
| Temperature deviation | ≤±1.5℃ |
| Temperature uniformity | ≤±2℃ |
| Relative humidity | ≥95%R.H |
| Gas generation method | Cylinder metho |
| Gas purity | 99.9% |
| Brand Name | Sinuo |
| Model Number | SN8814 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC 62368-1 Clause 5.4.9.1 Dielectric Strength Test Instrument
IEC62368-1 Clause 4.8 Figure V.1 Jointed Test Probe For Equipment
IEC 62368-1 Clause 4.8 Test Hook For Mechanical Strength Test Of Audio And
Clause 5.3.2, 5.4.10, V.1.4 Figure V.3 Blunt Probe Telecom Test Probe IEC 62368
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days | Packaging Details | Standard Exporting Plywood Case |
| Applied standard | IEC 62368-1 | Clause | Y.3.3 |
| Temperature range | RT＋10℃～50℃ | Temperature deviation | ≤±1.5℃ |
| Temperature uniformity | ≤±2℃ | Relative humidity | ≥95%R.H |
| Gas generation method | Cylinder metho | Gas purity | 99.9% |
| Brand Name | Sinuo | Model Number | SN8814 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | IEC 62368-1 Corrosion Resistance Testing Chamber ，Clause Y.3.3 Corrosion Resistance Testing Chamber ，Sulphur Dioxide Atmosphere Test Chamber | ||
IEC 62368-1 Clause Y.3.3 Sulphur Dioxide Test System Corrosion Resistance Testing Chamber
Product information:
The Water-saturated Sulphur Dioxide Atmosphere Test Chamber is designed and manufactured by IEC 62368-1:2018 clause Y.3.3, and etc.
It is suitable for testing the corrosion ability of materials and their protective layers, as well as the process quality comparison of similar protective layers, and can also assess the corrosion resistance of certain products.
Technical parameter:
| Applied standard | IEC 62368-1 |
| Applied clause | Y.3.3 |
| Temperature range | RT＋10℃～50℃ |
| Relative humidity | ≥95%R.H |
| Temperature fluctuation | ≤±0.5℃ |
| Temperature uniformity | ≤±2℃ |
| Temperature deviation | ≤±1.5℃ |
| Gas generation method | Cylinder metho |
| Sulphur oxide gas concentration | 0.1～1% (volume percentage) 1000ppm～10000ppm (high concentration) |
| Gas purity | 99.9% |
| Time setting range | 0～9999 M, H |
| Total power | 2.0 KW |
| Power requirements | AC220 (±10%) V/60HZ |
Chamber structure:
1. The chamber body and inner liner are made of PVC reinforced hard plastic board, the surface is smooth, and is resistant to aging and corrosion.
2. The door is made of fully transparent tempered glass, which is convenient for observing the test condition of the test sample during the test.
3. Two doors are designed, and the chamber body is sealed with a silicone sealing strip to prevent the leakage of Sulphur dioxide gas.
4. The top of the chamber is designed with an inclined way to facilitate the condensed water to slide down along the wall.
5. The volume of Sulphur dioxide gas is firstly measured through a special meter, and then the Sulphur dioxide gas enters the inside of the chamber. The meter is specially designed.
6. Sulphur dioxide gas enters the partial flow pipe in the chamber and diffuses evenly.
7. There is a pressure relief valve in the chamber, and the air outlet is connected to a filter.
8. The residual gas of the chamber is designed for lye atomization and neutralization and activated carbon physical adsorption filtration.
9. The laboratory can install the indoor air Leakage air filtration system
10. Use cylinder gas and special pressure reducing valve.
11. Heating and humidification is the heating method of the inner tank, which has fast heating and uniform temperature and humidity distribution.
12. Equipped with a bottle of Sulphur dioxide gas and a steel cylinder.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!