Sinuo Testing Equipment Co. , Limited
| Payment Terms | L/C, T/T, Western Union, MoneyGram |
| Supply Ability | 20 Sets Per Month |
| Delivery Time | 1 Month |
| Packaging Details | Plywood |
| Applied Standards | IEC 60335, IEC60598, IEC60065 adn etc. |
| Test Station | Single station |
| Control Method | Touch screen |
| Drive Method | Motor and electromagnet drive |
| Pull Weight | Can achieve 30N, 40N, 60N, 80N, 100N, 120N pull force |
| Torque Weight | can achieve 0.08N.m, 0.1 N. m, 0.15N.m, 0.25 N. m, 0.35 N. m, 0.425 N. m torque |
| Pull Cycles | 0~999999 can be preset, default of 25 cycles |
| Pull Frequency | 1 cycle / s |
| Brand Name | Sinuo |
| Model Number | SN1113A |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
75g Test Punch With 60° Conical Tungsten Carbide Tip IEC60335-2-24 Clause 22.116
IEC 60335-2-23 Skin or Hair Care Appliance Swivel Connection 50 r/min Rotation
IEC 60335-1 Oxygen Bomb Aging Test Chamber 4000cm3 Stainless Steel Air Bomb Tank
SS Electrical Appliance Tester IEC 60335-1 Clause 20.2 Similar To Test Probe B
Product Specification
| Payment Terms | L/C, T/T, Western Union, MoneyGram | Supply Ability | 20 Sets Per Month |
| Delivery Time | 1 Month | Packaging Details | Plywood |
| Applied Standards | IEC 60335, IEC60598, IEC60065 adn etc. | Test Station | Single station |
| Control Method | Touch screen | Drive Method | Motor and electromagnet drive |
| Pull Weight | Can achieve 30N, 40N, 60N, 80N, 100N, 120N pull force | Torque Weight | can achieve 0.08N.m, 0.1 N. m, 0.15N.m, 0.25 N. m, 0.35 N. m, 0.425 N. m torque |
| Pull Cycles | 0~999999 can be preset, default of 25 cycles | Pull Frequency | 1 cycle / s |
| Brand Name | Sinuo | Model Number | SN1113A |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | IEC60335 Electrical Appliance Testing Equipment ，Single Station Electrical Appliance Testing Equipment ，80N Electrical Appliance Testing Equipment | ||
IEC60335 Electrical Appliance Cord Anchorage Pull Force And Torque Test Apparatus
Standards & Clauses:
IEC60335-1:2016 “Household and similar electrical appliances-Safety-Part1:General requirements” clause 25.15
GB2099.1-2008
GB3883.1-2008
GB4706.1-2005
GB7000.1-2015
GB8898-2011
IEC60884-1:2006
IEC60745-1:2006
IEC60598-1:2014
IEC60065:2005
Technical Parameters:
| Test Station | Single |
| Control Method | Touch screen |
| Drive Method | Motor and electromagnet drive |
| Clamping Method for Specimen | Mechanical clamping, the height of clamping point is adjustable through adjusting screw rod |
| Pull Weight | 10N * 1 piece, 20N * 3 pieces, 30N * 2 pieces (Can achieve 30N, 40N, 60N, 80N, 100N, 120N pull force) |
| Torque Weight | 4N* 1 piece , 5N* 1 piece , 7.5N* 1 piece , 12.5N* 1 piece , 17.5N* 1 piece , 21.25N* 1 piece,torque arm is 20mm (can achieve 0.08N.m, 0.1 N.m, 0.15N.m, 0.25 N.m, 0.35 N.m, 0.425 N.m torque) |
| Pull Cycles | 0~999999 can be preset, default of 25 cycles |
| Pull Frequency | 1 cycle / s |
| Torque Time | 0.1S～99 h 59 m 59s |
| Test Contents | Pull and torque testing: make a mark on the cord where is 20mm to the anchorage, then apply the pull force at a rate of 1 time/second, after finishing pull testing, apply the torque for 1 min. The displacement of the mark position on the cord should not exceed 2 mm after testing. |
| Samples and Restrictions | Plugs for connecting flexible cables, fixed or mobile sockets; hand-held power tools; household appliances with flexible cord anchorage (eg induction cookers, washing machines); lamps with cables and wires; audio and video and related signal electronic devices with flexible cords (such as projectors) |
| Application | The cord anchorage shall relieve conductors from strain, including twisting, at the terminals and protect the insulation of the conductors from abrasion. This testing appliance applies pull force and torque tests for cord anchorage, to verify the reliability of the cord anchorage. |
| Test Principle | The eccentric wheel is driven by a motor, to make the pull weight pulled for 1s; the torque is applied to the sample by the electromagnet releases the torque weight, at the same time, the direction of the force applied and the axis of the sample form a torque arm through the torque wheel, so as to achieve torque test. The pull weights and torque weights can be customized to meet different requirements in different standards. |
| Structure | The equipment adopts motor cam ejector mechanism, the pull fixture is combined with the torque fixture, and matched by the bearing in the middle to reduce the friction during the torque test. The Z-shaped structure enables the fixture to clamp the appliance’s power cord which is 150mm above the bottom surface. It can test the firmness of the power cord anchorage of large household appliances, such as refrigerators and washing machines. Equipment dimensions:about:800×400×1200(mm)W×D×H Equipment weight:110kg |
| Use Environment | Power supply:AC220V±10%/50-60Hz,0.3KW |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!