Wisdomlong Technology CO.，LTD
| Payment Terms | L/C, T/T |
| Supply Ability | 1000 |
| Delivery Time | 3-5days |
| Packaging Details | New Original |
| Brand | Panasonic |
| Product type | Industrial Servo Drives |
| Part number | MCDLN35SE |
| Frequency | 3.2 kHz |
| Voltage | DC 24 V/48 V・AC 100 V/200 V/400 V, 23 bit |
| Power | 750W |
| Brand Name | Panasonic |
| Model Number | MCDLN35SE |
| Certification | CE |
| Place of Origin | Japan |
View Detail Information
Explore similar products
Lenze E94AMHE0074 SERVO DRIVE INPUT VOLTAGE 3 PHASE 325/565/705VDC
Mitsubishi Industrial AC Servo Drives MR-J2S-20A Servo Amplifier NEW
GYS101D5-RA2-B 3000r/Min Three Phase Servo Motor 200v Servo Motor Fuji Electric
Mitsubishi Industrial Servo Drives MR-J2M-70DU-S020 750W 0 - 360Hz
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 1000 |
| Delivery Time | 3-5days | Packaging Details | New Original |
| Brand | Panasonic | Product type | Industrial Servo Drives |
| Part number | MCDLN35SE | Frequency | 3.2 kHz |
| Voltage | DC 24 V/48 V・AC 100 V/200 V/400 V, 23 bit | Power | 750W |
| Brand Name | Panasonic | Model Number | MCDLN35SE |
| Certification | CE | Place of Origin | Japan |
| High Light | 200V Panasonic Industrial Servo Drives ，Industrial Servo Drives 3 phase ，MCDLN35SE | ||
MCDLN35SE Industrial Servo Drives 3phase 200 V 750W Panasonic
Description of Industrial Servo Drives MCDLN35SE
Manufacturer : Panasonic
Product no. : MCDLN35SE
Product type : Servo Driver
Operating temperature : 0°C ~ 55°C
Mounting type : Chassis
Type : Module
Interface : RS-232, RS-485, USB
Voltage supply : 200VAC
Current output : 22A
Voltage load : 200 V
Motor type : ServoControl / Drive
Type : Servo AC
Number of motors : 1Wattage
Load : 750W
Spec Detail of MCDLN35SE Industrial Servo Drives
| Item | Specifications |
|---|---|
| Part Number | MCDLN35SE |
| Details | A6SE series Position control type (Incremental system only, Pulse train only) without the safety function |
| Family Name | MINAS A6 |
| Series | A6SE series |
| Type | Position control type |
| Frame | C-Frame |
| Frequency response (kHz) | 3.2 |
| Control method | Position control |
| About control method | A6SE series driver (Position control only) does not correspond to the absolute system of using the serial communication with the host device. It supports incremental system only. |
| Safety Function | without |
| Supply voltage | Single/3-phase 200 V |
| I/F Classification of type | Pulse train only |
| Dimensions (W) (Unit: mm) | 65 |
| Dimensions (H) (Unit: mm) | 150 |
| Dimensions (D) (Unit: mm) | 170 |
| Mass (kg) | 1.6 |
| Environment | For more details, please refer to the instruction manual. |
Basic Specifications
| Item | Specifications |
|---|---|
| Input power: Main circuit | Single/3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Input power: Control circuit | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Encoder feedback | 23-bit (8388608 resolution) absolute encoder, 7-wire serial |
| About Encoder feedback | * Since it can be used only as an incremental system, do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to "1" (factory settings). |
| Parallel I/O connector: Control signal Input | General purpose 10 inputs The function of general-purpose input is selected by parameters. |
| Parallel I/O connector: Control signal Output | General purpose 6 output The function of general-purpose output is selected by parameters. |
| Parallel I/O connector: Analog signal Output | 2 outputs (Analog monitor: 2 output) |
| Parallel I/O connector: Pulse signal Input | 2 inputs (Photo-coupler input, Line receiver input) |
| Parallel I/O connector: Pulse signal Output | 4 outputs (Line driver: 3 output, open collector: 1 output) |
| Communication function | USB |
| Communication function: USB | USB interface to connect to computers for parameter setting or status monitoring. |
| Regeneration | Built-in regenerative resistor (external resistor is also enabled.) |
| Control mode | Switching among the following 3 mode is enabled, (1) Position control, (2) Internal velocity command, (3) Position/Internal velocity command |
Warranty
We offer 1 year warranty for this product. If the product is out of working order under proper usage per
instructions manual within the warranty period, please contact us to obtain a merchandise return code and
shipping instruction. Then, send it back at your shipping costs.
After receiving your return item, it will take 7 days for evaluation and investigation. A brand new
replacement unit will be sent to you at our shipping costs if it meets our warranty requirements.
Payment
Credit card on line is available.We also accept payment by T/T and Western Union.
This item have stock,so can delivery to you within 3 business days after your payment cleared.If ther
is any import duties or taxes,it is the buyer's responsibility.
Wisdomlong Technology CO.,LTD Featured Products:
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
Company Details
Business Type:
Distributor/Wholesaler,Trading Company,Seller
Year Established:
2009
Total Annual:
100000-200000
Employee Number:
15~30
Ecer Certification：
Active Member
Wisdomlong Technology CO.,LTD locats at the central of China,Shenzhen, Guangdong Province. With rapid development, Wisdomlong serves fields of automation in global markets, Our business covers five continents throughout the world with the basic convicti... Wisdomlong Technology CO.,LTD locats at the central of China,Shenzhen, Guangdong Province. With rapid development, Wisdomlong serves fields of automation in global markets, Our business covers five continents throughout the world with the basic convicti...
Get in touch with us
Leave a Message, we will call you back quickly!