Briture Co., Ltd.
| Payment Terms | L/C, T/T |
| Supply Ability | 10000 TON PER YEAR |
| Delivery Time | 2-3 weeks |
| Packaging Details | 5kgs net per box |
| Product name | Polypropylene Macro Fiber |
| Application | Shotcrete |
| Abrasion Resistance | Excellent |
| Chemical Resistance | Excellent |
| Elongation | ≥20% |
| Flammability | Non-flammable |
| Flexibility | Excellent |
| Material | PP |
| Melting Point | 160-170℃ |
| Tensile Strength | ≥1700MPa |
| UV Resistance | Excellent |
| Water Absorption | ≤0.2% |
| Brand Name | Briture |
| Model Number | none |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Concrete Reinforced Polypropylene Fibre Macrofibers 54mm For Construction Mining
6mm Monofilament Reinforced Concrete Polypropylene PP Fiber For Construction
PP Staple Macro Fiber For Concrete Fibers Instead Of Steel Fiber
48mm Embossed Macro Polypropylene Synthetic Fiber PP Fiber For Shotcrete
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 10000 TON PER YEAR |
| Delivery Time | 2-3 weeks | Packaging Details | 5kgs net per box |
| Product name | Polypropylene Macro Fiber | Application | Shotcrete |
| Abrasion Resistance | Excellent | Chemical Resistance | Excellent |
| Elongation | ≥20% | Flammability | Non-flammable |
| Flexibility | Excellent | Material | PP |
| Melting Point | 160-170℃ | Tensile Strength | ≥1700MPa |
| UV Resistance | Excellent | Water Absorption | ≤0.2% |
| Brand Name | Briture | Model Number | none |
| Certification | CE | Place of Origin | China |
| High Light | Polypropylene Macro Synthetic Reinforced Fiber ，Concrete Polypropylene Synthetic Reinforced Fiber ，Concrete Polypropylene Macro Fiber | ||
Concrete Reinforcing Polypropylene Macro Synthetic Reinforced Fiber For Concrete
Synthetic Macro fiber
Product Description
Briture Synthetic Macrofiber is made of Polypropylene. Polypropylene macro fiber (PP macrofiber)for concrete is one of pp fiber used for reinforcing concrete products and mainly used for structural fibers.
Provide good impact,fatigue,shrinkage control and ductility in all grade concretes.Cost saving,Is easier to use,to disperse and safe to handle.Can be used in highly corrosive circumstance.The surface has been embossed,which greatly improves the cohesive force between fibres and concrete,and also boosts shrinkage resistance and crack resistance.The toughness of macro synthetic fibre is less stronger than steel fibre.But test has shown slabs on grade and pre-cast concrete predominately require a dosage rate of between 25kg-40kg of steel fibres per cubic meter, in comparison,using between 3kg-10kg of macro synthetic fibre per cubic meter of concrete. Synthetic fibres achieve greater strength and ductility in the matrix.Estimating Data
These fibers are wrapped in bundles of water-soluble film and packed in cartons. When used, just put the whole boxes of the fibers into concrete.
The cartons and film are dissolved in water and the fibers are evenly dispersed in the concrete mixture.
Available Length: 48mm, 54mm, 64mm...
Features
1. All grades of concrete to provide good anti - fatigue, anti - shrinkage, anti - seismic and good toughness.
2. Simple operation, not easy to group, safety, reasonable price, cost savings..
3. Improve the supporting performance and bonding performance of concrete to produce effective secondary strengthening effect; Provide high residual strength of concrete and improve the durability of concrete;
4. Coarse fiber is most suitable for shotcrete, which can reduce rebound, reduce cost, form a thicker shotcrete layer, significantly improve bending strength, easy pumping and will not damage mechanical equipment.
Proposed Dosage
The dosage rate is dependent on the actual application however the minimum dosage range is 3kg/ m3-6kg / m3
Typical Application
Shotcrete, concrete engineering, such as foundations, roads, Bridges, DAMS, especially in the deformation and toughness of the higher
requirements of the project.
Specification
| Minimum Tensile Strength | ≥550MPa |
| Modulus | ≥9000Mpa |
| Fiber Dimension | L: 48mm/54mm/64mm;T: 0.55-0.60mm; W: 1.30-1.40mm |
| Melt Point | 170℃ |
| Density | 0.91g/cm3 |
| Melt flow | 3.5 |
| acid&alkali resistance | Excellent |
| Moisture Content | ≤0% |
| Appearance | Embossed |
Packing
5kg/ box, 1200-1300kgs/pallet, 12800kgs/1X20`FCL, 25600kgs/1X40`FCL
Packing image:
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2011
Total Annual:
2,000,0000.00-5,000,000.00
Employee Number:
5~20
Ecer Certification：
Site Member
Briture Co., Ltd. was founded in year of 2011 by Mr. Wang Yao in Anhui, China. who has rich experience of 20years to supply chemical materials, especially in the field of printing ink and paint industry. In the same year, we cooperated with Alibaba for developing export... Briture Co., Ltd. was founded in year of 2011 by Mr. Wang Yao in Anhui, China. who has rich experience of 20years to supply chemical materials, especially in the field of printing ink and paint industry. In the same year, we cooperated with Alibaba for developing export...
Get in touch with us
Leave a Message, we will call you back quickly!