BOGEN PUMPS
| Payment Terms | FOB T/T |
| Supply Ability | 10000/mon |
| Delivery Time | 5days |
| Packaging Details | carton |
| hs code | 8413501020 |
| Name | Polypropylene Diaphragm Pump |
| Advantage | High Volume |
| Feature | Good Self Priming Performance |
| Maximum air inlet pressure | 0.6 MPA |
| Maximum flow rate | 271/Min |
| Max dry suction | 4.2M |
| Brand Name | BSK |
| Model Number | BSKP06PP-PTT-B |
| Place of Origin | Guangzhou |
View Detail Information
Explore similar products
Pneumatic Chemical Polypropylene Diaphragm Pump Corrosion Resistant
0.6mpa Dye Industry Air Operated Diaphragm Waste Oil Pump With Check Valve
Air Powered Polypropylene Diaphragm Pump Dual Diaphragm Pump Non Leakage
PP Low Pressure Diaphragm Pump Chemistry Industry Membrane Pump Self Priming
Product Specification
| Payment Terms | FOB T/T | Supply Ability | 10000/mon |
| Delivery Time | 5days | Packaging Details | carton |
| hs code | 8413501020 | Name | Polypropylene Diaphragm Pump |
| Advantage | High Volume | Feature | Good Self Priming Performance |
| Maximum air inlet pressure | 0.6 MPA | Maximum flow rate | 271/Min |
| Max dry suction | 4.2M | Brand Name | BSK |
| Model Number | BSKP06PP-PTT-B | Place of Origin | Guangzhou |
| High Light | acid diaphragm pump ，air powered diaphragm pump | ||
High Volume Polypropylene Diaphragm Pump Good Self Priming Performance
Polypropylene Diaphragm Pump
(also know as a Membrane pump, air operated double diaphragm pump(AOOD)or pneumatic diaphragm pump)that uses a combination of the reciprocating action of a rubber,thermoplastic or diaphragm and suitable valves either side of the diaphragm (check valve,butterfly valves,flap valves,or any other form of shut-off valves) to pump a fluid.
| Item | Description | Unit | Reference Figure |
| 1 | Maximum air inlet pressure | Mpa | 0.6 |
| 2 | Maximum flow rate | 1/Min | 27 |
| 3 | Maximum lift | M | 45 |
| 4 | Maximum outlet pressure | Mpa | 0.6 |
| 5 | Maximum particle size | mm | 1 |
| 6 | Weight | kg | 1.8 |
| 7 | Noise level | db | ＜68 |
| 8 | Max dry suction | m | 4.2 |
Polypropylene Diaphragm Pump Application
1, Poisonous, combustible and volatilizable liquids.
2, Strong acid, strong alkali liquids with corrosion
3, Tanker truck, bilk plant, load and unload of oil products
4, Pickle, fruit pulp, mashed potatoes, chocolates, etc
5, Paint, rubber, pigment and adhesives
6, Various ceramic pulp, grouting, mortar and slurry
7, Various latex, organic solvents, stuffing
8, Stripping of oil carrier (pump dirty water and residual oil)
9, Common hop, thin paste of yeast power, syrup and molasses
10, Special liquid
General Description
The diaphragm pump offers high volume delivery even at low air pressure and a b road range of material compatibility options available.Refer to the model and option chart.The pump is provided with the modularized air motor and fluid section.
The air operated diaphragm pump alternately generates the intake fluid pressure and positive fluid pressure in the fluid chamber by using the pressure difference in the air chamber. The ball valve can ensure the forward flow of fluid.
Pump cycling will begin as air pressure is applied and it will continue to pump and keep up with the demand. It will build and maintain line pres -sure and will stop cycling once maximum line pressure is reached (dis -pensing device closed) and will resume pumping as needed.
FLUID SECTION DISASSEMBLY
Remove the upper and lower manifold (1) and (11).
Remove the ball (2), “O” ring (3) (47) and ball seat (4).
Remove the fluid cap (5).
NOTE: Only diaphragm models use a primary diaphragm(6A) and a backup diaphragm(6). Refer to the aux iliary view in the Fluid Section illustration.
Remove the screw (10), washer (9), diaphragm (6A, 6) and diaphragm washer (7, 8).
NOTE: Do not scratch or mar the surface of (23) diaphragm rod.
FLUID SECTION REASSEMBLY
Reassemble in reverse order.
Clean and inspect all parts. Replace worn or damaged parts with new parts as required.
Lubricate (23) diaphragm rod and 25) “Y” ring with grease.
Fix the diaphragm rod (23) with the auxiliary installation tool.
Prior to the final fastening of bolts and nuts, please determine whether the diaphragm (6A,6) is aligned with the fluid cap (5) properly to avoid the twisting of the diaphragm.
For the models using diaphragm: three rubber diaphragms (6) on the side, which are marked with AIRS SIDE "air chamber" are mounted in face of the pump body.
Start the pump, check the fastening and sealing after it runs for a period of time.
Company Details
Business Type:
Manufacturer,Importer,Exporter
Year Established:
2001
Total Annual:
100000-300000
Employee Number:
>200
Ecer Certification：
Verified Supplier
BOGEN As a company absorbed in fluid transportation who invented the world's first dualceramic air valve system! Its highly valued by customers for its unique patentedtechnology and nanny service, high quality, wide applicable area, and excellentstability.In 2011 set up its factor... BOGEN As a company absorbed in fluid transportation who invented the world's first dualceramic air valve system! Its highly valued by customers for its unique patentedtechnology and nanny service, high quality, wide applicable area, and excellentstability.In 2011 set up its factor...
Get in touch with us
Leave a Message, we will call you back quickly!