Ningbo Brando Hardware Co., Ltd
| Payment Terms | L/C, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 10000 pcs per month |
| Delivery Time | Negotiation |
| Packaging Details | Box，Carton |
| Port size | 2" |
| Material | Alloy |
| Media | Gas,Air |
| Power | Solenoid |
| Pressure | Medium Pressure |
| Structure | Diaphragm |
| Brand Name | BRANDO |
| Model Number | SCG353A050 |
| Certification | ISO,CE |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Aluminum SS30 3 / 4 Inch Port Pulse Jet Solenoid Valve Z Type SCG353A043
Normally Close Threaded Ports Pneumatic Pulse Valve Similar As CA45T RCA45T
CA76MM 220V AC 50/60HZ Pneumatic Pulse Valve , Dust Collector Pneumatic
Right Angle Aluminium Pneumatic Pulse Valve CA50T QR DIN43650A SS304 Ferrule
Product Specification
| Payment Terms | L/C, D/P, T/T, Western Union, MoneyGram | Supply Ability | 10000 pcs per month |
| Delivery Time | Negotiation | Packaging Details | Box，Carton |
| Port size | 2" | Material | Alloy |
| Media | Gas,Air | Power | Solenoid |
| Pressure | Medium Pressure | Structure | Diaphragm |
| Brand Name | BRANDO | Model Number | SCG353A050 |
| Certification | ISO,CE | Place of Origin | CHINA |
| High Light | pulse jet valves ，pulse solenoid valve | ||
Normal Close 2" Inch Alloy Integral Pilot Solenoid Pulse Jet Valve SCG353A050
The 353 series is a two-position normally closed, internal pilot type two-stage pulse diaphragm valve. The valve body is made of aluminum and has a threaded connection port.,The pipe connection must match the parameters indicated on the product nameplate.
Note
Reducing the diameter of the pipe may cause the solenoid valve to malfunction or malfunction.
To protect the solenoid valve, install the appropriate strainer or filter as close as possible to the inlet end.
Used for bag house dust collector
Working pressure:0.4~0.6MPa
Working medium: Compressed clean air
Voltage:DC24V, AC24V, AC110V, AC220V/50HZ
Temperature:-10°C~55°C
The relative humidity of air not exceeding 85%
Service life of diaphragm:1 million times
Dimension of Pulse Valve
| Type | Port Size | Orifice(mm) | Kv/Cv | Pressure | ||
| M3/h | I/min | Mix | Max | |||
| SCG353A047 | 1 1/2" | 52 | 46 | 768 | 0.35 | 8.5 |
| SCG353A050 | 2" | 66 | 77 | 1290 | 0.35 | 8.5 |
| SCG353A051 | 2 1/2" | 66 | 92 | 1540 | 0.35 | 8.5 |
| SCG353B060 | 3" | 75 | 170 | 2833 | 1 | 6 |
Other Size of Pulse Jet Valve
Delivery
Precautions for use
1. If the raw material tape, paste, lubricant is used when it is fixed. To prevent their particles from entering the system.
2. Use the correct tool and use the installation tool as much as possible at the connection point.
3. To prevent damage to the solenoid valve, do not over-tighten the pipe.
4. Do not use the valve body or coil as a lever.
5. The pipe cannot be connected to any force, bend or deformation after the pipe is connected.
6. If electrical connections are made, they must be performed by trained personnel and must comply with local regulations and standards. All electrical screw terminals must be properly secured to standard before use. Depending on the voltage, electrical components must be grounded and must comply with local codes and standards.
7. Perform an electrical test first before applying pressure to the system. Power on the solenoid valve a few times, pay attention to whether you can hear the metal click that indicates the normal operation of the solenoid valve.
8. Most solenoid valves are equipped with coils that allow them to operate continuously. In order to prevent personal injury or property damage, please do not touch the solenoid valve because it will generate heat under normal working conditions. If the solenoid valve is easily accessible, the installer must provide protection against accidents caused by contact.
please care the products details at our website, any confuse please contact us or Note your request online. Big quantity purchase ,please contact our online service to ask more economic shipping way or discuss the more pretty price.
Welcome our inquiry!
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2008
Total Annual:
8million-9million
Employee Number:
50~100
Ecer Certification：
Verified Supplier
* Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years. * We have served customers fr... * Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years. * We have served customers fr...
Get in touch with us
Leave a Message, we will call you back quickly!