Brazed Shell Tube Heat Exchanger Cooler Carbon Steel High Efficiency

Product Specification

shell and tube heat exchanger copper tube with high efficiency in air cooled heat pump units. 

Our products are widely used in water-cooled chillers,water source heat pumps,low-temperature liquid cooling units,industrial water chillers,air-cooled and air cooled heat pump units and other large scale central air conditioning equipment and commercial air conditioners.cold rooms(freeze and deep freeze),marine use refrigeration,cold air drying machines and tempurature control for manufacturing of molds.

Shell tube heat exchanger use bronze and copper nickel alloys with high efficiency , the heat exchanging copper pipes are dipping in the refrigerant, so the exchangers can provide high heat transfer efficiency , the gas refrigerant and liquid refrigerant will be separated enough , the engine performance is efficient,clean,safe , energy-efficient, nice and durable.

Features:

The structure of Shell-tube heat exchanger is strong, we can choose a variety of materials in manufacturing, adaptability is extremely strong, especially widely used in high temperature, high pressure and large devices .

Typical Application

Evaporator in Screw chiller system

Dry shell and tube evaporators are mainly used in Freon refrigeration systems. The refrigerant liquid of this kind of evaporator goes on the tube side, so the refrigerant charge is less. Its structure is similar to that of the flooded evaporator, the difference is that a number of circular baffles with arcuate area cut off and arranged upside down are set on a plurality of horizontal smooth copper tubes. After throttling, the refrigerant liquid enters the tube side from the inlet below the end cover of one end of the evaporator. After absorbing heat in 2-4 processes, it is led out from the outlet above the end cover on the same side. The flow of refrigerant in the shell-and-tube type dry evaporator has different forms such as single-in and single-out, double-in and single-out, and double-in and double-out. The cooling tube is usually a copper tube with an outer diameter of 12-16mm. There are longitudinal fins in the tube. The mass flow rate in the tube is generally 180-200 kg/(nf-s), and the number of partitions should ensure that the coolant flows laterally. The speed of the tube cluster is 0.5—1.5 m/so

The advantages of dry evaporators are: ① less liquid filling, which is about 40% of the inner volume of the tube; ② less affected by the static pressure of the refrigerant liquid; ③ easy to drain oil; ; ⑤ The refrigerant level is easy to control; ⑥ The structure is compact; ⑦ The heat transfer coefficient is high. The disadvantage is that the liquid supply of the refrigerant in the tube group is not easy to be uniform, the manufacture and installation of the baffle plate is more troublesome, and between the tube hole and the tube of the baffle plate on the refrigerant side, and between the outer circumference of the baffle plate and the shell, leakage bypass flow is easy to occur. , thereby reducing the heat transfer effect.

Condenser in Screw chiller system

GHE provide customers in HVAC and refrigeration industries with quality and stabilization shell tube evaporators ,we help customer to create value with our honest attitude and competitive price .

 Shell-tube Evaporator Specification

The quality will be beyond your imagination