Qingdao Huashida Machinery Co., Ltd.
| Payment Terms | L/C,D/A,D/P,T/T |
| Supply Ability | 50 Units/Month |
| Delivery Time | 50-90 days |
| Packaging Details | Standard Package |
| HS code | 3920999090 |
| Application | Connecting and Welding Plastic Pipline |
| Material | Plastic |
| Size | According to Customer′s Requirements |
| Brand Name | Huashida |
| Model Number | EN253, EN448, EN728, ISO1133, ISO8501-1. ISO9001 |
| Certification | CE, ISO:9001:2008 |
| Place of Origin | Qingdao, China |
View Detail Information
Explore similar products
5mm Plastic PVC /PE/PP Sheet Board Extruder Extrusion Line
2mm Plastic Panel Sheet Board Extrusion Line 380V 3P 50Hz
Three Calender Plastic Sheet Board Extrusion Line PLC Control
Three Roller Calender Plastic Sheet / Board Extrusion Line Heat & Cold
Product Specification
| Payment Terms | L/C,D/A,D/P,T/T | Supply Ability | 50 Units/Month |
| Delivery Time | 50-90 days | Packaging Details | Standard Package |
| HS code | 3920999090 | Application | Connecting and Welding Plastic Pipline |
| Material | Plastic | Size | According to Customer′s Requirements |
| Brand Name | Huashida | Model Number | EN253, EN448, EN728, ISO1133, ISO8501-1. ISO9001 |
| Certification | CE, ISO:9001:2008 | Place of Origin | Qingdao, China |
| High Light | PE Heat Shrinkable Sleeve Line ，line for production shrinkable sleeves ，Heat Shrinkable Sleeve Extrusion Line | ||
PE Heat Shrinkable Sleeve Production Line Bestseller in Europe
Basic Info.
Buried Pipeline Field Joint Heat Shrinkable Sleeve is made by PE/PP material, used for oil/gas/water pipeline anticorrosion joints. It is served for 3LPE/PP pipeline, pre-insulation pipe end seal, and hdpe corrugated pipe.
Application area:
It is mainly used for wrapping around pipe, anti-corrosion of kinds of pipe joints, and repairing pipes. Heat shrinkable sleeve forThermo Insulated Pipe
COMPARISIONS
3Layer Fiber reinforced heat shrink sleeve for HDD under ground pipes
3Layer Fiber reinforced PE heat shrinkable tape (sleeve) is composed of cross-linked polyethylene back, a middle layer of fiber and special heat melt adhesive an. The 3 layer reinforced sleeve gives better shrink ratio, and better strength. It is resistant to corrosion, wear, impact, UV and aging, easier to be operated.
TECHNICAL PARAMETERS
| NO | Text Item | Unit | Performance | Text Result | Text Metho | ||
| Back Material | |||||||
| 1 | Tensile Strengt | MPa | ≥17 | 19.47 | ASTM D638 | ||
| 2 | Elongatio | % | ≥400 | 626 | ASTM D638 | ||
| 3 | Vicat Softening Poin | ºC | ≥90 | 92 | ASTM D1525 | ||
| 4 | Brittleness Temperatur | ºC | <-65 | <-65 | ASTM D2671C | ||
| 5 | Dielectric Strengt | MV/m | ≥25 | 33.13 | ASTM D149 | ||
| 6 | Volume Resistivit | Ω.m | ≥1*1013 | 1.1*1013 | ASTM D257 | ||
| 7 | Environment Stress Crac | h | ≥1000 | >1000 | GB/T1842 | ||
| 8 | Chemical resistance (7d | 10% HCI | Tensile strength | MPa | ≥85 | 104.9 | ASTM D638 |
| Elongation | % | ≥85 | 96.3 | ASTM D638 | |||
| 10% NaAH | Tensile strength | MPa | ≥85 | 102.1 | ASTM D638 | ||
| Elongation | % | ≥85 | 95.6 | ASTM D638 | |||
| 10% NaCL | Tensile strength | MPa | ≥85 | 108.3 | ASTM D638 | ||
| Elongation | % | ≥85 | 94.1 | ASTM D638 | |||
| 9 | Thermal aging (150ºC,168h | Tensile strength | MPa | ≥14 | 20.7 | ASTM D638 | |
| Elongation | % | ≥300 | 630 | ASTM D638 | |||
| NO. | Text Ite | Uni | Performanc | Text Resul | Text Metho | |
| Adhesive | ||||||
| 1 | Softening Poin | ºC | ≥90 | 90.1 | ASTM E28 | |
| 2 | Brittleness Temperatur | ºC | <-15 | <-15 | ASTM D2671C | |
| 3 | Lap Shea | MPa | ≥1.0 | 1.5 | ASTM D1002 | |
| 4 | Peel Strength (23±2ºC | Steel | N/cm | ≥70 | 145.6 | ASTM D1000 |
| Primer | N/cm | ≥70 | 205.9 | ASTM D1000 | ||
| PE laye | N/cm | ≥70 | 190.0 | ASTM D1000 | ||
| Non-solvent Epoxy Primer | ||||||
| 5 | Shear of cured primer | MPa | ≥5.0 | 12 | SY/T0041 | |
Product introduction
·pre-cut sleeve and separate closure patch
Heat shrinkable sleeve for sealing thermo-Insulated Pipe
Specification of heat shrinkable sleeve for field joint coating underground buried steel pipe
| No. | Size, mm | Length, mm | Patch | |
| Length, mm | Width, mm | |||
| 1 | Ф159*500 | 670 | 500 | 80 |
| 2 | Ф219*500 | 860 | 100 | |
| 3 | Ф273*500 | 1000 | 100 | |
| 4 | Ф325*500 | 1200 | 100 | |
| 5 | Ф355*500 | 1300 | 100 | |
| 6 | Ф406*500 | 1460 | 120 | |
| 7 | Ф508*500 | 1800 | 120 | |
| 8 | Ф610*500 | 2170 | 120 | |
| 9 | Ф711*500 | 2500 | 150 | |
| 10 | Ф813*500 | 2880 | 150 | |
| 11 | Ф1016*500 | 3480 | 150 | |
| 12 | Ф1219*500 | 4120 | 200 | |
| 13 | Ф1420*500 | 4780 | 200 | |
| NO | Test Item | Unit | Performance | Test Result | Test Method | ||
| Back Material | |||||||
| 1 | Tensile Strength | MPa | ≥17 | 19.47 | ASTM D638 | ||
| 2 | Elongation | % | ≥400 | 626 | ASTM D638 | ||
| 3 | Vicat Softening Point | ºC | ≥90 | 92 | ASTM D1525 | ||
| 4 | Brittleness Temperature | ºC | <-65 | <-65 | ASTM D2671C | ||
| 5 | Dielectric Strength | MV/m | ≥25 | 33.13 | ASTM D149 | ||
| 6 | Volume Resistivity | Ω.m | ≥1*1013 | 1.1*1013 | ASTM D257 | ||
| 7 | Environment Stress Crack | h | ≥1000 | >1000 | GB/T1842 | ||
| 8 | Chemical resistance | 10% HCI | Tensile strength | MPa | ≥85 | 104.9 | ASTM D638 |
| Elongation | % | ≥85 | 96.3 | ASTM D638 | |||
| 10% NaAH | Tensile strength | MPa | ≥85 | 102.1 | ASTM D638 | ||
| Elongation | % | ≥85 | 95.6 | ASTM D638 | |||
| 10% NaCL | Tensile strength | MPa | ≥85 | 108.3 | ASTM D638 | ||
| Elongation | % | ≥85 | 94.1 | ASTM D638 | |||
| 9 | Thermal aging (150ºC,168h) | Tensile strength | MPa | ≥14 | 20.7 | ASTM D638 | |
| Elongation | % | ≥300 | 630 | ASTM D638 | |||
| NO. | Text Item | Uni | Performance | Text Result | Text Method | |
| Adhesive | ||||||
| 1 | Softening Point | ºC | ≥90 | 90.1 | ASTM E28 | |
| 2 | Brittleness Temperature | ºC | <-15 | <-15 | ASTM D2671C | |
| 3 | Lap Shear | MPa | ≥1.0 | 1.5 | ASTM D1002 | |
| 4 | Peel Strength (23±2ºC | Steel | N/cm | ≥70 | 145.6 | ASTM D1000 |
| Primer | N/cm | ≥70 | 205.9 | ASTM D1000 | ||
| PE layer | N/cm | ≥70 | 190.0 | ASTM D1000 | ||
| Non-solvent Epoxy Primer | ||||||
| 5 | Shear of cured primer | MPa | ≥5.0 | 12 | SY/T0041 | |
Company Details
Business Type:
Manufacturer
Year Established:
2003
Total Annual:
3000000-5000000
Employee Number:
100~200
Ecer Certification：
Verified Supplier
1. company profileQingdao Huashida Machinery Co., Ltd. is located in Qingdao High & New Technology Industrial Area- Qingdao Huashida industrial Park, covers an area of about 4000 square meters. We have tens of years experience in plastic pipe, sheet, and board extrusion lines, and pipe joints a... 1. company profileQingdao Huashida Machinery Co., Ltd. is located in Qingdao High & New Technology Industrial Area- Qingdao Huashida industrial Park, covers an area of about 4000 square meters. We have tens of years experience in plastic pipe, sheet, and board extrusion lines, and pipe joints a...
Get in touch with us
Leave a Message, we will call you back quickly!