Comen CM1200B ECG Battery JHT-99K-00 MODEL ICR18650 2200mAh 14.8V Original ECG

Product Specification

Comen CM1200B ECG battery JHT-99K-00 MODEL ICR18650 2200mAh 14.8V Original ECG Battery

■ Product Describe

Comen CM1200B ECG battery JHT-99K-00 MODEL ICR18650 is an original lithium-ion battery for Comen ECG electrocardiograph. The battery model is JHT-99K-00, using ICR18650 battery cells, the battery capacity is 2200mAh, and the rated voltage is 14.8V. The main function of this battery is to provide stable and reliable power support for Comen CM1200B electrocardiograph, to ensure that the electrocardiograph can provide power in scenarios without external power supply or mobile use, to ensure that the electrocardiograph can operate normally, and continuously collect, analyze and display the patient's ECG data. Minimize the impact of power outages on the equipment, ensure the stable operation of the equipment, and continuously collect the patient's ECG information, and provide reliable data support for the clinical diagnosis of medical staff.

■ Product advantages

1. High energy density

The battery uses ICR18650 cells, which have high energy density and can store more electrical energy in a relatively small volume, providing a longer battery life for the electrocardiograph, meeting the dual requirements of portability and battery life in medical scenarios

2. No memory effect

It is a lithium-ion battery, so there is no memory effect. There is no need to exhaust the battery before charging, which makes it more convenient to use. Medical staff can charge the battery at any time without affecting the battery life and performance, which improves the efficiency of use. ​

3. Long cycle life

Under normal use, the number of charge and discharge cycles is greater than 500 times, which has a longer service life than some ordinary batteries, reducing the replacement cost and maintenance frequency of the hospital. ​

4. High safety

The cells have undergone multiple safety tests, such as short circuit, overcharge, hot box test, etc., which can meet the safety standards, do not catch fire or explode, and ensure safe use in medical environments. At the same time, the battery may be equipped with overcurrent, overcharge and over-discharge protection circuits to further improve safety during use.

■ Products Parameters

■ FAQ​

Q1: What should I pay attention to when using the battery for the first time?

A1: When using the battery for the first time, there is no need to overcharge or discharge it. After use, charge the battery when the remaining power is about 20% - 30%. Unplug the charger in time after it is fully charged to avoid overcharging. ​

Q2: How long does it take to charge the battery?

A2: The charging time of the battery will be affected by factors such as the power of the charger. Generally speaking, using the original adapter charger, it may take 2-4 hours from exhaustion to full.

Q3: What should I do if the battery life is significantly shortened after using it for a period of time?

A3: First, confirm whether the battery is used in a high or low temperature environment, whether there is frequent overcharging or over-discharging, etc., which may affect the battery life. If these factors are excluded, it may be that the battery capacity has naturally decayed after multiple charge and discharge cycles. When the battery life is shortened to seriously affect the use, it is recommended to replace the battery with a new one.