Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
Delivery Time | 3-5work days |
Output signal | 9-13mV in Air* |
Zero current (offset) | <0.1% O2 |
T90 response time | < 5 seconds |
T99.5 response time | <50 sec |
Measurement Range | 0-100% O2 |
Linearity | Linear |
Temp. Compensation (0-40°C) | < 2% O2 |
ecommended Load Resistor | min 10k Ohms |
Model Number | SGX-4OX |
View Detail Information
Explore similar products
H2S-AH Hydrogen Sulfide Sensor (High Current H2S Sensor) Is Used In Hydrogen
NH3-B1 Four Electrode Electrochemical Ammonia Sensor (NH3 sensor) Is Used In
H2S-B4 High Resolution Hydrogen Sulfide Sensor (H2S sensor) Is Used To Monitor
NO2-A1 Nitrogen Dioxide Sensor (Portable NO2 Sensor) For Nitrogen Dioxide
Product Specification
Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Delivery Time | 3-5work days |
Output signal | 9-13mV in Air* | Zero current (offset) | <0.1% O2 |
T90 response time | < 5 seconds | T99.5 response time | <50 sec |
Measurement Range | 0-100% O2 | Linearity | Linear |
Temp. Compensation (0-40°C) | < 2% O2 | ecommended Load Resistor | min 10k Ohms |
Model Number | SGX-4OX | ||
High Light | Ventilators Gas Sensor ,Ventilators Gas Oxygen Sensor |
SGX-4OX Electrochemical Gas Sensor Gas Oxygen Sensor 0-100% Oxygen (O2) Sensor With On Board Temperature Compensation For Ventilators
CROSS - SENSITIVITY DATA:
Toxic gases at TLV levels will have no cross-sensitivity effect on SGX-VOX oxygen sensors. At very high levels (i.e. % levels), highly oxidising gases (e.g. ozone, chlorine) will interfere to the extent of their oxygen equivalent, but most other commonly occurring gases will have no effect.
ACID GASES :
Acid gases such as CO2 and SO2 will be absorbed by the electrolyte and tend to increase the flux of oxygen to the electrode. This gives an enhanced oxygen signal of approximately 0.3% of signal per 1% CO2. SGX-VOX sensor is not suitable for continuous operation in concentrations of CO2 above 25%. The SGX-VOX sensor is not designed for use in applications where anaesthetic gases are present.
Temperature Range | -20°C to +50°C |
Pressure Range | 500 to 2000 mbar |
Operating Humidity Range | 0% to 99% RH (non condensing) |
Long Term Output Drift | <5% per annum |
Recommended Storage Temp | 0°C to 20°C |
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2006
Total Annual:
900000-1000000
Employee Number:
50~80
Ecer Certification:
Verified Supplier
Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, ph... Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, ph...
Get in touch with us
Leave a Message, we will call you back quickly!