Packaging Details | Standard packing or according to customer's requirement |
Product name | Pinion Gear, mill girth gear |
Material | Alloy Steel |
Type | Mill Girth Gear |
Port | Qingdao China |
Warranty | 12 months |
Application | Rotary kiln and ball mill |
Dimensions | Rotary kiln gear and ball mill gear |
Maximum module | 45 by hob |
Brand Name | ZTIC |
Model Number | Mill Girth Gear |
Certification | ISO\CE |
Place of Origin | Henan China |
View Detail Information
Explore similar products
Coal Mill Splash / Forced Lubrication Forged Ring Gear and ball mil girth gear
16m CNC Hobbing Machine Cutting Spur Rotary Kiln Girth Gear And Mill Girth Gear
Rotary Kiln Casting Steel HRC55 Spur Mill Girth Gear And Ball Mill Girth Gear
10 Module 100mm Dia High Precision Raymond Steel Mill Ring And Mill Girth Gear
Product Specification
Packaging Details | Standard packing or according to customer's requirement | Product name | Pinion Gear, mill girth gear |
Material | Alloy Steel | Type | Mill Girth Gear |
Port | Qingdao China | Warranty | 12 months |
Application | Rotary kiln and ball mill | Dimensions | Rotary kiln gear and ball mill gear |
Maximum module | 45 by hob | Brand Name | ZTIC |
Model Number | Mill Girth Gear | Certification | ISO\CE |
Place of Origin | Henan China |
Ball Mill Large Gear Ring Cast Steel Tooth Surface Fine Grinding Customization
Technical Requirements
1) Surface hardening pretreatment is normalizing, with a hardness of HB210-250. Mechanical properties are: ultimate strength Rb690MPa, yield strength Rs490MPa, elongation D511%, reduction of area W25%, and impact toughness Ak30J. Gear teeth are induction hardened to a hardness of HRC50-55, with an effective hardened layer depth of 3-5mm.
2) Ultrasonic flaw detection is performed throughout the gear, and internal quality must meet the Class II requirements specified in GB7233-87. Magnetic particle inspection is also performed on the gear teeth and transition fillets, and quality must meet the Class II requirements specified in GB/T9444-88.
Gear Ring Manufacturing Process
2.1 Blanks
Steel casting blanks are provided by the factory and manufactured in accordance with GB11352-89. Castings are molded, melted, poured, boxed, cleaned, and trimmed according to the casting process requirements. During inspection and acceptance, the steel castings are inspected according to the drawings and technical requirements. Once qualified according to JB/T6402-92, they are released to the next process.
2.2 Rough Machining: Marking and machining allowances are performed according to the drawing requirements, followed by alignment, connection, machining of internal and external circumferences, milling of mating surfaces, and drilling.
2.3 Flaw Detection: Ultrasonic flaw detection is performed throughout the entire casting. Internal quality should meet the Class II requirements specified in GB7233-87.
2.4 Normalizing Pretreatment: Pairs of half ring gears are normalized and tempered to provide a good microstructure for subsequent surface hardening. The half ring gears are inspected for post-heat treatment deformation according to the drawing requirements. 2.5 Final Inspection
First, after medium-frequency quenching and tempering, check the hardness of each tooth groove of the ring gear to ensure it meets the drawing requirements. Second, check whether the maximum outer diameter (D6944) has increased. If the deformation is 3mm, mechanical correction is required until it meets the requirements. Third, perform a magnetic particle inspection on the gear teeth and transition fillets. The quality should meet the second level requirements specified in GB/T9444-88. Finally, conduct a final inspection according to the drawings and technical requirements.
Product Display
Product Parameters
(1) GS42CrMo4 alloy cast steel (Enterprise Proprietary standard) HB 220-240 | (1) Ladle refining of molten steel (argon blowing and R-H vacuum treatment) | ⑴ Mechanical properties and chemical composition of casting blanks (internal control standards) |
⑵ Half-length structure, Y-shaped sheet | ⑵Use the exclusive cold mold sand hanging technology to ensure the density of castings and teeth | ⑵ Ultrasonic flaw detection after rough machining |
(3)helical tooth | ⑶ Normalizing treatment (proprietary technology) ensures the hardness of the tooth surface | ⑶ Ultrasonic flaw detection and magnetic particle flaw detection after semi-finishing and finishing |
⑷ Reasonable sealing and alignment structure | ⑷ After rough hobbing, loosen the gear, repair the joint surface, and then fine hobbing | ⑷ Magnetic particle flaw detection and hardness inspection of tooth surface |
(5) Specialized self-made hob precision gear hobbing | ⑸ Tooth profile tolerance inspection | |
⑹ No-load test run before delivery to check the meshing accuracy of large and small gears |
Company Details
Business Type:
Manufacturer
Year Established:
1981
Total Annual:
80 million-100 million
Employee Number:
500~1000
Ecer Certification:
Verified Supplier
Luoyang Zhongtai Industries Co., Ltd. The company was founded in 1981 and finished joint stock reform in 2005. There are eight subsidiaries and it's an independent legal entity with the qualifications of operating import & export trade. With a garden-like industrial park and modern st... Luoyang Zhongtai Industries Co., Ltd. The company was founded in 1981 and finished joint stock reform in 2005. There are eight subsidiaries and it's an independent legal entity with the qualifications of operating import & export trade. With a garden-like industrial park and modern st...
Get in touch with us
Leave a Message, we will call you back quickly!