Xrido SRF Shredder for Industrial Waste Textile Leather Cloth Recycling

SRF, the full name of which is Solid Recovered Fuel, namely solid recovered fuel, is an alternative fuel made from waste after pretreatment. It is mainly composed of renewable resources such as municipal solid waste, industrial waste and agricultural waste. Through a series of complex technological processes, such as sorting, crushing, drying and molding, these wastes are transformed into a high calorific value solid fuel that can be used for power generation or heating by combustion. SRF has multiple advantages, such as reducing landfill volume, lowering greenhouse gas emissions, and conserving primary resources. Meanwhile, due to its high calorific value and stable combustion,SRF also has great potential in replacing traditional fossil fuels. At present, SRF has been widely applied and promoted in many countries and regions.

SRF shredder is a kind of equipment specially used for processing solid waste and converting it into recycled fuel. SRF shredder shreds materials based on the principle of low speed, high torque and rotary shear. The material enters the shredding box through the feeding system. The box is equipped with shredding knives and blades, and the push box pushes the material to the vicinity of the blades. The material is torn into small pieces by the shredding blades, pressed and sheared, and discharged from the screen holes.

SRF shredder is suitable for the crushing of solid waste such as waste plastics, electronic waste, urban waste, domestic waste, kitchen waste, medical waste, various types of wood, etc. It is also commonly used for the crushing of waste large-diameter PE plastic pipes, bales of plastic film, large piles of plastic sheets and head materials.

Features of SRF shredder:
The blades made of imported wear-resistant materials can ensure high energy, low consumption, stability and reliability, and achieve high-power crushing processing capacity and high reliability for long-term continuous use.
It has the characteristics of large crushing force, high output, low noise and good stability.
It is very durable and can be used normally in harsh environments.

Providing one-stop Solution

The process flow of making SRF from industrial waste such as scrap textiles, leather and fabrics

1. Raw material collection and pretreatment collection: Collect discarded industrial waste such as textiles, leather, and fabrics from various industrial sources. Pre-treatment: After the raw materials enter the factory area, they are first sorted manually or mechanically to remove large pieces of non-flammable impurities such as metal and glass. At this stage, metal impurities can be initially separated by magnetic separation equipment.
2. Crushing and fine Sorting: Primary crushing: The classified raw materials are sent to the primary crusher to be crushed into fragments of about 5-10 centimeters. The moisture content of the materials is controlled. Raw materials with a moisture content exceeding 25% need to be pre-dried separately. Fine sorting: Use multi-layer drum screens and permanent magnetic equipment to further separate iron and non-ferrous metal fragments, and process non-magnetic metals with eddy current separators. The sorting accuracy of this link directly affects the calorific value of the subsequent fuel.
3. Drying and secondary crushing drying: A three-channel rotary dryer is adopted, with the hot air temperature controlled at 180-220℃ to ensure that the moisture content of the outlet material is less than 12%. Monitor the exhaust humidity in real time and adjust the material advancement speed to adapt to the characteristics of different materials. Secondary crushing: The dried materials enter the secondary crushing process, where they are crushed to a particle size of 1-3 centimeters by a hammer crusher. At the same time, a metal detector is installed for secondary inspection to ensure there is no metal residue.
4. Mixing and Molding Mixing: In a double-shaft mixer, different materials are mixed in proportion. According to the characteristics of the materials, an appropriate amount of binder is added to enhance the molding strength. High-pressure forming: Use a ring mode briquetting machine, with the pressure set within the range of 80 to 120 megapascals, and maintain the mold temperature at around 60℃ to fully activate the adhesive. The pressed fuel blocks are cooled and shaped by the cooling conveyor belt, and the cooling time is no less than 25 minutes.

Waste to Biomass/RDF/SRF/TDF Briquette System::

The solid waste disposal system can be customized according to the actual materials.

FINAL PRODUCT