SAK-TC297TA-128F300N BC 32-bit Microcontrollers - MCU

Product Specification

SAK-TC297TA-128F300N BC

Summary of Features:

The TC29x product family has the following features:

• High Performance Microcontroller with three CPU cores

• Two 32-bit super-scalar TriCore CPUs (TC1.6P), each having the following features:

– Superior real-time performance

– Strong bit handling

– Fully integrated DSP capabilities

– Multiply-accumulate unit able to sustain 2 MAC operations per cycle

– up to 300 MHz operation at full temperature range

– up to 300 MHz operation at full temperature range

– up to 32 Kbyte Instruction Scratch-Pad RAM (PSPR)

– 16 / 32 Kbyte Instruction Cache (ICACHE)

– 8 Kbyte Data Cache (DCACHE)

• Lockstepped shadow cores for TC1.6P core 1

• Multiple on-chip memories

– All embedded NVM and SRAM are ECC protected

– up to 8 Mbyte Program Flash Memory (PFLASH)

– up to 768 Kbyte Data Flash Memory (DFLASH) usable for EEPROM emulation

– 32 Kbyte Memory (LMU)

– BootROM (BROM)

• 128-Channel DMA Controller with safe data transfer

• Sophisticated interrupt system (ECC protected)

• High performance on-chip bus structure

– 64-bit Cross Bar Interconnect (SRI) giving fast parallel access between bus masters, CPUs and memories

– 32-bit System Peripheral Bus (SPB) for on-chip peripheral and functional units

– One bus bridge (SFI Bridge)

• Safety Management Unit (SMU) handling safety monitor alarms

• Memory Test Unit with ECC, Memory Initialization and MBIST functions (MTU)

• Hardware I/O Monitor (IOM) for checking of digital I/O

• Versatile On-chip Peripheral Units

– Four Asynchronous/Synchronous Serial Channels (ASCLIN) with hardware LIN support (V1.3, V2.0, V2.1 and J2602) up to 50 MBaud

– Six Queued SPI Interface Channels (QSPI) with master and slave capability up to 50 Mbit/s

– High Speed Serial Link (HSSL) for serial inter-processor communication up to 320 Mbit/s

– Two serial Micro Second Bus interfaces (MSC) for serial port expansion to external power devices

– Two MultiCAN+ Module with 6 CAN nodes and 384 free assignable message objects for high efficiency data handling via FIFO buffering and gateway data transfer

– 15 Single Edge Nibble Transmission (SENT) channels for connection to sensors

– Up to two FlexRayTM modules with 2 channels (E-Ray) supporting V2.1

– One Generic Timer Module (GTM) providing a powerful set of digital signal filtering and timer functionality to realize autonomous and complex Input/Output management

– One Capture / Compare 6 module (Two kernels CCU60 and CCU61)

– One General Purpose 12 Timer Unit (GPT120)

– One General Purpose 12 Timer Unit (GPT120)

– Peripheral Sensor Interface with Serial PHY (PSI5-S)

– Inter-Integrated Circuit Bus Interface (I2C) conforming to V2.1

– Optional IEEE802.3 Ethernet MAC with RMII and MII interfaces (ETH)

• Versatile Successive Approximation ADC (VADC)

– Cluster of 11 independent ADC kernels

– Input voltage range from 0v to 5.5V (ADC supply)

• Delta-Sigma ADC (DSADC)

– Ten channels

• Digital programmable I/O ports

• On-chip debug support for OCDS Level 1 (CPUs, DMA, On Chip Buses)

• Dedicated Emulation Device chip available

– multi-core debugging, real time tracing, and calibration

– Aurora Gigabit Trace Port (AGBT) on some variants

– four/five wire JTAG (IEEE 1149.1) or DAP (Device Access Port) interface

• Power Management System and on-chip regulators

• Clock Generation Unit with System PLL and Flexray PLL

• Embedded Voltage Regulator

Technological Parameters:

Customer Service:

1. Do you support BOM lists?

Of course, we have a professional team to provide BOM.

2. Shown below. Behind MOQ?

Our MOQ is flexible and can be provided according to your needs, with a minimum of 10 pieces.

3. What about lead time?

After receiving the deposit, we will arrange to pack the goods and contact logistics for delivery. The duration is 3-7 days.

4. Our advantage?

1. Stable and sufficient supply

2. Competitive pricing

3. Rich BOM experience

4. Perfect after-sales service

5. Professional test certificate

5. Our service?

Payment methods :T/T, L/C, D/P, D/A, MoneyGram, Credit Card, paypal, Western Union, Cash, Escrow, Alipay...

6. Transportation:

DHL, TNT, FedEx, EMS, DEPX, Air, Sea Shipping

Product Photos: