8Pa 800Kg Lifting Glass Load And Unload Machine

Product Specification

glass Load and unload machine for sale and Vertical Washing And Drying Machine

Cantilever crane LJXJ300

1. This vacuum glass lifter is for handling insulating glass plate.
2. This glass lifter can lift 800kg glass sheet
3. Equipped with 5 suckers. However, suckers can be added as needed by the client.
4. The device is stable, easy to use and safe.
5. The vacuum lifter is equipped with a warning light in case of a power failure or vacuum leak, which immediately turns off the optical and acoustic signals, alerting the operator to emergency operations.

Parameter:

Useing For
- Insulating Glass Production line,
- Installing Glass Curtain Wall System,
- Loading and Unloading glass sheet on glass cutting table,
- Instaling car windscreen.

Glass Washing Machine LJLBQJ2500

• *The remaining sheet metal parts are sprayed with advanced mechanical paint or powder.
• *Aluminum alloy assembly structure, no scrap, permanent use, high efficiency, energy saving 70% efficiency.
• *Rubber roller is made of vulcanized rubber and stainless steel shaft.
• *The cleaning part that comes in contact with water is made of stainless steel.
• *Cleaning department, lift for the entire wind staff, maximum lift: 350mm, easy to clean and maintain.
• * 3 pairs of brush (Ø150mm) stainless steel shaft configurations (low e glass, regular coated glass, sunshine coated glass can be cleaned without damaging the coated surface).
• * 2 sets of special stainless steel aluminum alloy air knife configuration, strong wind, good air drying effect, with heating system (temperature control device, optional opening and closing);
• *The fan is equipped with an air filter in the air inlet chamber, which has a large air volume and good air drying effect. The entire fan box is installed at the top of the workshop and has an air filter screen on the side for easy inspection. cleaning;
• *Gear transmission, frequency control, main drive with digital display, rotation of brush roller in washing section, each driven by independent belt of upper and lower motor, frequency conversion adjusting speed is stable, service life Realizes special glass that is long and has high cleaning requirements.
• *Mechanical button control, digital display of cleaning machine, easy to operate, easy to operate, easy to maintain.
• *Cleaning the water tank outside the washing machine, convenient water tank cleaning, water exchange, checking, washing machine washing is more beautiful.
• * PLC control, option with touch screen display. It is convenient for operators to operate and maintain, and can be connected to all manufacturers of edge grinders without gaps (purchase separately if needed).

• Using 6 pieces of soft brushes

• Wash online and offline low-e glass, automatically recognizes Low-e film

• Washing part adopts the design of upper and lower layered structure

• Adopt variable frequency fan, energy efficient, good cleaning effect

• The air knife can automatically adjust the width of the air knife according to the thickness

• Using intelligent intermittent energy-saving working methods

• Hierarchical type washing system

• Water tank automatic temperature control, water replenishing system

• European silencer system 

• 304 stainless steel materials 

---

---