Shenzhen Wisdomlong Technology CO.,LTD
| Payment Terms | T/T |
| Supply Ability | 100 |
| Delivery Time | 5-8 work days |
| Packaging Details | New in original box |
| Brand | GE Fanuc |
| Model | IC693MDL752 |
| Series | Series 90-30 |
| Power Type | Digital I/O |
| Output points | 32 |
| Output groups | 4 |
| Output modes | TTL mode, 12 / 24 Volts DC mode |
| LED indicators | Yes |
| Output connection | 2 x 24-pin connectors |
| warranty | 1 year |
| Brand Name | GE |
| Model Number | IC693MDL752 |
| Place of Origin | USA |
View Detail Information
Explore similar products
ABB 3BSE038415R1 S800 Analog Input Output Module AO810V2 ASEA BROWN BOVER
AI810 Digital I O Module 3BSE008516R1 , AC Input Module 1x8 Channels 50V
2x8Ch Digital Input Relay Remote Input Output Module ABB 3BSE008552R1 DI811
ABB CI810B Digital I O Module 3BSE020520R1 AF100 Field Communication Interface
Product Specification
| Payment Terms | T/T | Supply Ability | 100 |
| Delivery Time | 5-8 work days | Packaging Details | New in original box |
| Brand | GE Fanuc | Model | IC693MDL752 |
| Series | Series 90-30 | Power Type | Digital I/O |
| Output points | 32 | Output groups | 4 |
| Output modes | TTL mode, 12 / 24 Volts DC mode | LED indicators | Yes |
| Output connection | 2 x 24-pin connectors | warranty | 1 year |
| Brand Name | GE | Model Number | IC693MDL752 |
| Place of Origin | USA | ||
| High Light | 24v DC Negative Logic Output Module ，TTL Negative Logic Output Module ，GE FANUC IC693MDL752 | ||
The 5/24-volt DC (TTL) Negative Logic Output module, IC693MDL752, has 32 negative logic or sinking type output points (active low) and uses 32 bits of discrete %Q output data. The outputs are arranged in four separate groups (labeled A to D), each group comprised of eight outputs each (numbered 1 to 8) with each group having its unique common. It can be installed in any Series 90-30 Programmable Logic Controller (PLC) system having a 5 or 10- I/O slot baseplate. Each group common has user I/O connectors which carry two pins. Each pin on these connectors has a current handling capacity of 3 amperes. Making connections to both pins is recommended when connecting the common, but required for applications requiring high current such as between 3 and 4 amperes.
The IC693MDL752 operates in two modes: Transistor-Transistor Logic (TTL) and 12/24V modes. In the TTL mode, each output can switch user loads across +5 VDC. In 12/24V mode, user loads can be switched in the range of +12 to -24 VDC. Also, output points, in each mode (TTL and 12/24V), can sink a maximum current of 25 mA and 0.5A per point respectively. Each output group in the module (A to D) can be utilized in the operating mode that is appropriate for the load requirements of a specific task or application. Group A can be applied to TTL load tasks and Group B to 12 VDC loads, while the Groups C and D can be applied to 24 VDC load tasks. However, when mixing modes (TTL and inductive-type loads), as in this regard, it is important to take cognizance of electrical noise and its effects.
User load devices are connected to the module through two male 24-pin connectors that are located on the front of the module. The connectors on the right interfaces with groups A and B output points while those on the left interfaces with groups C and D output points. Optocouplers on the module provide backplane isolation between the field side and logic side. The module also has LED indicators, labeled correspondingly to each output, at the top of the module which indicates the active (ON) or inactive (OFF) status of each output point. There is no reporting of special fault or alarm diagnostics.
Each output point has an internal pull-up resistor. When the output point's field-effect transistor (FET) is off, the resistor aims at providing a high logic level for TTL tasks. It does this by pulling up the output to the positive side of the user power input, which, for TTL tasks, is typically +5V. Stopping the CPU forces all 32 output points off and the user must provide power to supply current to the loads. A minimum amount of the user-supplied power is used by the module to provide gate drive to output devices.
| Rated Voltage: | 5 and 12 thru 24 volts DC |
| # of Outputs: | 32 |
| Freq: | n/a |
| Output Current: | 25 mA per point (TTL mode) |
| Output Voltage Range: | 4.75 to 5.25 volts DC (TTL mode) |
| DC Power: | Yes |
| Rated Voltage | 5, and 12 through 24 volts DC, negative logic (active low) 4.75 to 5.25 volts DC (TTL mode) 10.2 to 28.8 volts DC (12/24V mode) 32 (four groups of eight outputs each) 1500 volts between field side and logic side 250 volts between groups 25 mA per point (maximum in TTL mode) 0.5 amps per point (maximum in 12/24V mode); with 4 amps maximum per group and 3 amps maximum per group common pin
4.6 amps for 10 ms 0.4 volts DC (maximum in TTL mode) 0.24 volts DC (maximum in 12/24V mode) 0.1 mA maximum 0.5 ms maximum 0.5 ms maximum 260 mA (maximum) from 5 volt bus on backplane; (13 mA + 3 mA/point ON + 4.7 mA/LED) 12 mA (maximum) per group from user supply @ 5VDC and all eight outputs in group ON 25 mA (maximum) per group from user supply @ 12 VDC and all eight outputs in group ON 44 mA (maximum) per group from user supply @ 24 VDC and all eight outputs in group ON |
| Output Voltage Range | |
| Outputs per Module | |
| Isolation | |
| Output Current | |
|
Output Characteristics | |
| Inrush Current | |
| On-state (active low) | |
| Voltage Drop | |
| Off-state Leakage Current | |
| On Response Time | |
| Off Response Time | |
| Internal Power Consumption |
Company Details
Business Type:
Importer,Exporter,Trading Company,Seller
Year Established:
2010
Total Annual:
1000000-5000000
Employee Number:
100~120
Ecer Certification：
Verified Supplier
Shenzhen Wisdomlong Technology CO.,LTD Mainly engaged in automation parts, PLCS,DCS,sensors, relays, dirves,encoder, servo drive,soft starter,touch screen,instrument,process control,electric transmission and factory automation aspects of the project design,software programming,technical service and ... Shenzhen Wisdomlong Technology CO.,LTD Mainly engaged in automation parts, PLCS,DCS,sensors, relays, dirves,encoder, servo drive,soft starter,touch screen,instrument,process control,electric transmission and factory automation aspects of the project design,software programming,technical service and ...
Get in touch with us
Leave a Message, we will call you back quickly!