Shenzhen Wisdomlong Technology CO.,LTD
| Payment Terms | T/T |
| Supply Ability | 100 |
| Delivery Time | 5-8 work days |
| Packaging Details | New in original box |
| Brand | GE Fanuc |
| Model | IC697MDL651 |
| Series | Series 90-70 |
| Rated voltage | 5 Volts DC |
| Input voltage range | -3 to 7 Volts DC |
| Required current | 0.53 Amps |
| Number of inputs per module | 32 |
| Cable length | 30 meters (98.4 feet) maximum |
| Isolation voltage | 1500 Volts |
| warranty | 1 year |
| Brand Name | GE |
| Model Number | IC697MDL651 |
| Place of Origin | USA |
View Detail Information
Explore similar products
ABB 3BSE038415R1 S800 Analog Input Output Module AO810V2 ASEA BROWN BOVER
AI810 Digital I O Module 3BSE008516R1 , AC Input Module 1x8 Channels 50V
2x8Ch Digital Input Relay Remote Input Output Module ABB 3BSE008552R1 DI811
ABB CI810B Digital I O Module 3BSE020520R1 AF100 Field Communication Interface
Product Specification
| Payment Terms | T/T | Supply Ability | 100 |
| Delivery Time | 5-8 work days | Packaging Details | New in original box |
| Brand | GE Fanuc | Model | IC697MDL651 |
| Series | Series 90-70 | Rated voltage | 5 Volts DC |
| Input voltage range | -3 to 7 Volts DC | Required current | 0.53 Amps |
| Number of inputs per module | 32 | Cable length | 30 meters (98.4 feet) maximum |
| Isolation voltage | 1500 Volts | warranty | 1 year |
| Brand Name | GE | Model Number | IC697MDL651 |
| Place of Origin | USA | ||
| High Light | ESCPP Positive Logic Output Module ，24VDC Positive Logic Output Module ，RS485 Digital I O Module | ||
The GE IC697MDL651 is a 32-point discrete input module part of the Series 90-70 Programmable Controllers. It features 32 TTL compatible input points with each input having a pullup resistor. Thus, user power is not required. The input filter selectable is 1ms or 10ms and one input is configurable as interrupt. There are LED indicators present on the top of the module, which provide information about the ON/OFF status of each point of the circuit’s logic (or PLC) side. The rated voltage of IC697MDL651 is 5 volts DC. There are 32 inputs per module with 98.4 (30m) maximum cable length. Isolation is 1500 volts. Input voltage range is between -3 and +7 volts DC. Input characteristics of the module include impedance of 5.9K ohms, ±5%; on-state voltage of -3 to 0.5 volts; off-state voltage of 2 to 7 volts; typical on-state current of 1.7mA at rated voltage and maximum off-state current of 1.1mA. The current required from 5V bus is .53 amp. In addition, the system is designed to support the VME standard C.1.
The IC697MDL651 module is mechanically keyed in order to ensure a similar type in the field can correctly replace it if needed. I/O references can be configured by the user without the need to use DIP switches or jumpers on the module.The above-mentioned mechanical key the module comes with prevents unintended substitution of the wrong module type in the same slot. The key is designed to fit an area on the board below the connector that has a unique shape. It is important to note that in a IC697 PLC rack, the leftmost position is reserved for a power supply only. In addition, one spot located next to the power supply needs to contain a CPU or a Bus Receiver Module. The input module’s design allows it to have negative logic characteristics.
This means it sinks current running from input device to the user common. IC697MDL651 is compatible with different input devices such as limit switches, pushbuttons, selector switches, BCD outputs, counters as well as other TTL compatible outputs.
To configure the device, use the configuration function of Windows or MS-DOS software running on Windows NT or Windows 95 through the SNP port or over Ethernet TCP/IP. IC697MDL651 is configurable to have 1 ms or 10 ms filter delay time.
Configuration is not a per point basis but rather on a module basis, which means that all points have the same filter time. Whenever the IC697MDL651 is used with IC697 CPU, input point A1 can be configured so to cause a CPU interruption either on the falling or the rising edge of signal transition. Input filter time selection does not affect interrupt response. In terms of field wiring, a single connection is required between the module common and user common. This is due to the fact the 32 points share a common. However, for wiring convenience, two connections are provided.
| Rated Voltage: | 5 volts DC |
| Number of Inputs: | 32 Inputs (one group) |
| Input Current: | 1.7 mA at rated voltage |
| Current Required: | 0.53 Amps |
| Input Voltage Range: | -3 to +7 volts DC |
| DC Power: | Yes |
| Rated Voltage: | 5 volts DC |
| Inputs per Module: | 32 98.4’ (30m) maximum cable length |
| Isolation: | 1500 volts - any input to backplane |
| Input Voltage Range (Vs): | -3 to +7 volts DC |
| InputCharacteristics | |
| Impedance: | 5.9K ohms, 5% |
| On-state Voltage: | -3 volts to 0.5 volts |
| Off-state Voltage: | 2 volts to 7 volts |
| On-state Current: | 1.7mA (typical) at rated voltage |
| Off-state Current: | 1.1mA (maximum) |
| Filter Delay Time: | 1 ms or 10 ms configurable |
| Current Required from 5V Bus: | .53 amp |
| VME | System designed to support the VME standard C.1 |
Company Details
Business Type:
Importer,Exporter,Trading Company,Seller
Year Established:
2010
Total Annual:
1000000-5000000
Employee Number:
100~120
Ecer Certification：
Verified Supplier
Shenzhen Wisdomlong Technology CO.,LTD Mainly engaged in automation parts, PLCS,DCS,sensors, relays, dirves,encoder, servo drive,soft starter,touch screen,instrument,process control,electric transmission and factory automation aspects of the project design,software programming,technical service and ... Shenzhen Wisdomlong Technology CO.,LTD Mainly engaged in automation parts, PLCS,DCS,sensors, relays, dirves,encoder, servo drive,soft starter,touch screen,instrument,process control,electric transmission and factory automation aspects of the project design,software programming,technical service and ...
Get in touch with us
Leave a Message, we will call you back quickly!