Supply Ability | 10 sets per month |
Delivery Time | 20 days |
Packaging Details | Carton box |
Current loading of cores | 0-25A |
Voltage loading | 0-400V |
Testing speed | 0.33m/S |
Testing distance | 1000±20mm |
Suitable cores | 2-18 |
Nominal cross-sectional area | 0.2~4mm2 |
Brand Name | HongCe |
Model Number | HDX1302 |
Certification | Calibration certificate(cost additional) |
Place of Origin | China |
View Detail Information
Explore similar products
Audio Video Information Electric Vibration Test System With Power Amplifier ,
IEC60065 2014 Annex A Rain Oscillating Tube Test Chamber For Waterproof
IEC60065-1 Glow Wire Tester Simulates Thermal Stress Test Of Glowing Component
Audio , Video And Similar Electronic Drop Test Apparatus Single Station Motor
Product Specification
Supply Ability | 10 sets per month | Delivery Time | 20 days |
Packaging Details | Carton box | Current loading of cores | 0-25A |
Voltage loading | 0-400V | Testing speed | 0.33m/S |
Testing distance | 1000±20mm | Suitable cores | 2-18 |
Nominal cross-sectional area | 0.2~4mm2 | Brand Name | HongCe |
Model Number | HDX1302 | Certification | Calibration certificate(cost additional) |
Place of Origin | China | ||
High Light | audio measurement equipment ,drop test equipment |
Standard:
Conforms to IEC60065:2014 clause 16.3 b), IEC60950, IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.1 Figure 1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods.
Application:
It is used for checking mechanical strength of completed flexible cables. This test does not apply to flexible cables with cores of nominal cross-sectional area greater than 4mm2 and cables having more than 18 cores laid up in more than two concentric layers.
Test sample:
Completed flexible cables.
Feature:
This cable tester consists of a carrier C (see IEC60245-2 Figure 1),a driving system for the carrier and four pulleys for each sample of cable to be tested. The carrier C supports two pulleys A and B, which are of the same diameter. The two fixed pulleys, at either end of the apparatus, may be of a different diameter from pulleys A and B, but all four pulleys shall be so arranged that the sample is horizontal between them. The carrier makes cycles (forward and backward movements) over a distance of 1 m at an approximately constant speed of 0,33m/s between each reversal of the direction of movement. A sample of flexible cable about 5 m long shall be stretched over the pulleys, each end being loaded with a weight. The mass of this weight and the diameter of pulleys A and B are given in following table.
Parameters:
Power supply | AC 220V/ 50HZ( can be customed) |
Current loading of cores | 0-25A |
Voltage loading | 0-400V |
Testing speed | 0.33m/S |
Testing distance | 1000±20mm |
Suitable cores | 2-18 |
Nominal cross-sectional area | 0.2~4mm2 |
Diameter of pulleys | 60, 80, 120, 160, 200mm ( Customer optional: Standard equipped 3pcs) |
Combined weights | 0.5kg, 1kg, 1.5kg, 2kg, 2.5kg, 3kg, 3.5kg, 4kg, 6kg, 7.5kg, 8kg |
Fault testing | Current interruption, short circuit between conductors, test and short circuit between the pulley. |
Picture for reference:
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification:
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!