Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 10 set /month |
| Delivery Time | 20 days |
| Packaging Details | plywood |
| Power | 220VAC 50Hz |
| Standard | IEC60730-1 |
| Brass washer | Φ60*2.5mm |
| Friction wheel | Φ65*7.5mm |
| Test sample | Label |
| Test station | 1 |
| Test stroke | 20mm |
| Test rate | 48rpm |
| Brand Name | HongCe |
| Model Number | IN-2 |
| Certification | calibration certificate (cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC 60745-2-1 Electric Hammer Durability Test Apparatus Steel Ball Diameter 38mm
IEC 60811 Natural Convection Oven Heating Chamber 8-20 Air Changes Per Hour
IEC Testing equipment Inductive Load Bank With 3 Test Stations Output Current
IEC 60745-2-5 Testing Equipment For Circular Saw Switch And Lower Guard
Product Specification
| Payment Terms | T/T | Supply Ability | 10 set /month |
| Delivery Time | 20 days | Packaging Details | plywood |
| Power | 220VAC 50Hz | Standard | IEC60730-1 |
| Brass washer | Φ60*2.5mm | Friction wheel | Φ65*7.5mm |
| Test sample | Label | Test station | 1 |
| Test stroke | 20mm | Test rate | 48rpm |
| Brand Name | HongCe | Model Number | IN-2 |
| Certification | calibration certificate (cost additional) | Place of Origin | China |
| High Light | Label Marking Abrasion Test Machine ，48rpm Abrasion Test Machine ，IEC 60730-1 Abrasion Test Machine | ||
48rpm Label Marking Abrasion Test Machine - 20mm Test Stroke
A.1 Markings on controls shall be adequately indelible for safety and are therefore classified according to the requirements for indelibility:
A.1.1 Markings which are not mandatory within the requirements of this standard (IEC 60730-1).
A.1.2 Markings which are mandatory within the requirements of this standard but which are not accessible to the final user when the control is mounted or installed in the equipment. IEC Test Equipment
These markings have to be sufficiently resistant to removal to withstand the manual handling in the control manufacturer's factory after final inspection, being packed and transported to the equipment manufacturer's factory, and handled during installation. Additionally, the marking shall remain legible in the presence of any vapour or other contaminant likely to be present. IEC Test Equipment
Production introduction:
This testing apparatus is design and manufactured according to IEC60730-1 standard figure 8 and annex A requirements, used for testing the controller marking durability performance. IEC Test Equipment
The apparatus comply with the dimensions requirements of IEC 60730-1 Figure 8. Test times can be set from 1 to 999999 (default as 12 times), test rate 48 rpm. It is a easy operated professional equipment.
Main technical parameters:
| Equipment | Markings durability tester |
| Test station | 1 station |
| Test stroke | 20mm |
| Test rate | 48rpm IEC Test Equipment |
| Test times | 1~999999, default as 12times |
| Sliding weight | 500g. Strip weight 250g, with weight 750g |
| Brass washer | Φ60*2.5mm |
| Friction wheel | Φ65*7.5mm |
| Power supply | 220VAC 50Hz IEC Test Equipment |
| Standard | IEC 60730-1 Figure 8, Annex A |
Picture for reference:
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!