SHANGHAI UNITE STEEL
| Payment Terms | L/C, T/T, D/A, D/P |
| Supply Ability | 1000 Metric Tons per Month |
| Delivery Time | 15-35 days |
| Packaging Details | In standard export packing and seaworthy material with rectangular shape bundle, covered with tarpaulin, in ontainers or in bulk, or upon request |
| Matrial | Alloy Steel |
| Standard | GB, ASTM, DIN,JIS |
| Grade | 4140 / 42CrMo4 1.7225 |
| Diameter | 4-1600mm |
| Length | Below 16 meters |
| Shape | Round bar |
| Techniques | Cold drawn; Hot rolled; Cold rolled; Forged |
| Surface | Black, Bright, Polished, Peeled, or upon request |
| Ultrasonic Test | 100% UT Passed |
| Processing | Annealed or Quenched and tempered provided |
| End | Beveled, plain end as required |
| Quality Inspection | SGS, BV etc. |
| Service | Cutting service and 3rd party inspection is provided |
| Brand Name | UST |
| Model Number | ASTM 4140 |
| Certification | ISO 9001:2008 |
| Place of Origin | MAINLAND CHINA |
View Detail Information
Explore similar products
EU Din1.8509 Forged Steel Bar Aluminum Alloy Nitriding Steel Grade For
St52 Hot Forged Steel Round Bars With Black / Turned / Grinded Surface
Engineering EN 35NiCr6 1.5815 Hot Forged Alloy Steel Bar
Dia 800mm AISI A2317 Hot Forged Structural Steel Bars
Product Specification
| Payment Terms | L/C, T/T, D/A, D/P | Supply Ability | 1000 Metric Tons per Month |
| Delivery Time | 15-35 days | Packaging Details | In standard export packing and seaworthy material with rectangular shape bundle, covered with tarpaulin, in ontainers or in bulk, or upon request |
| Matrial | Alloy Steel | Standard | GB, ASTM, DIN,JIS |
| Grade | 4140 / 42CrMo4 1.7225 | Diameter | 4-1600mm |
| Length | Below 16 meters | Shape | Round bar |
| Techniques | Cold drawn; Hot rolled; Cold rolled; Forged | Surface | Black, Bright, Polished, Peeled, or upon request |
| Ultrasonic Test | 100% UT Passed | Processing | Annealed or Quenched and tempered provided |
| End | Beveled, plain end as required | Quality Inspection | SGS, BV etc. |
| Service | Cutting service and 3rd party inspection is provided | Brand Name | UST |
| Model Number | ASTM 4140 | Certification | ISO 9001:2008 |
| Place of Origin | MAINLAND CHINA | ||
| High Light | Forged Round Bar ，Forged Steel Bars ，Forged Steel Round Bars | ||
ASTM 4140 / EN 42CrMo4 1.7225 Alloy Steel Bar / Rod Forged 130-1600mm
INTRODUCTION
AISI SAE 4140 alloy steel is a chromium molybdenum alloy steel specification widely used in general purpose high tensile steel for components, like axles, shafts, bolts, gears and other applications. Similar to alloy grade AISI 4130 chrome moly alloy steel but with a slightly higher carbon content. The higher carbon content of AISI 4140 steel gives greater strength and heat treatment capabilities in comparison to AISI / ASTM 4130 alloy steels, however it does have inferior weldability characteristics.
APPLICATIONS
ASTM alloy 4140 steel bar, flat or plate material can be used for as wide variety of applications where greater toughness and wear resistance is needed over lower carbon grades.
Typical applications for 4140 tool steel uses include:
Components, Adapters, Arbors,strippers, holder blocks, mold bases, ejectors, back up and support tooling, fixtures, jigs, molds, cams, drill collars, Axle Shafts, Bolts, Crankshafts,stubs, couplings, reamer bodies, axles, shafting, piston rods, rams, hydraulic machinery shafts, gears, sprockets, gear racks, chain links, spindles, tool bodies, tool holders, tie rods, Connection Rods, Chuck Bodies, Collets, Conveyor Pins & Rolls, Ejector Pins, Forks, Gears, Guide Rods, Hydraulic Shafts & Parts,Lathe Spindles, Logging Parts, Milling Spindles, Motor Shafts, Nuts, Pinch Bars, Pinions, Pump Shafts,boring bars,tracks, slides, wear strips or parts, forming dies, brake dies, trim dies, bolsters, machinery parts and components, etc.
-Delivery Conditions:
Cold drawn: 4-100 mm
Peeled: 30-160 mm
Grinded: 4- 600 mm
Turned: 130-1200 mm
Hot rolled: 12-320 mm
Hot forged: 130-1600 mm
-EAF+(ESR) or EAF+LF+VD+(ESR)
-HOT rolled; Cold rolled; Forged; Cold Drawn
-Heat Treatment: Untreated, Annealing, N+T, Q+T
-Smelting: EAF+LF+VD (+ESR)
-Surface Finish: Black, Rough Machined, Peeled, Turned or upon request
-UT 100% passed
-Cutting service provided
-Third Party inspection is acceptable (SGS, BV etc.)
COMMON 4140 STEEL EQUIVALENCY
| Country | USA | German | British | Japan | China | Australia |
| Standard | ASTM A29 | DIN 17200 | BS 970 | JIS G4105 | GB/T 3077 | AS 1444 |
| Grades | 4140 | 1.7225/ 42crmo4 | 42CrMo4 | SCM440 | 42CrMo | 4140 |
4140 STEEL BAR CHEMICAL COMPOSITION
| Standard | Grade | C | Mn | P | S | Si | Cr | Mo |
| ASTM A29 | 4140 | 0.38-0.43 | 0.75-1.00 | 0.035 | 0.040 | 0.15-0.35 | 0.8-1.10 | 0.15-0.25 |
| EN 10250 | 42CrMo4/ 1.7224 | 0.38-0.45 | 0.6-0.9 | 0.035 | 0.035 | 0.4 | 0.9-1.2 | 0.15-0.30 |
| JIS G4105 | SCM440 | 0.38-0.43 | 0.60-0.85 | 0.03 | 0.03 | 0.15-0.35 | 0.9-1.2 | 0.15-0.30 |
MECHANICAL PROPERTIES OF AISI ALLOY 4140 STEEL BAR
| Properties | Metric | Imperial |
| Tensile strength | 655 MPa | 95000 psi |
| Yield strength | 415 MPa | 60200 psi |
| Bulk modulus (typical for steel) | 140 GPa | 20300 ksi |
| Shear modulus (typical for steel) | 80 GPa | 11600 ksi |
| Elastic modulus | 190-210 GPa | 27557-30458 ksi |
| Poisson’s ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation at break (in 50 mm) | 25.70% | 25.70% |
| Hardness, Brinell | 197 | 197 |
| Hardness, Knoop (converted from Brinell hardness) | 219 | 219 |
| Hardness, Rockwell B (converted from Brinell hardness) | 92 | 92 |
| Hardness, Rockwell C (converted from Brinell hardness. Value below normal HRC range, for comparison purposes only) | 13 | 13 |
| Hardness, Vickers (converted from Brinell hardness) | 207 | 207 |
| Machinability (based on AISI 1212 as 100 machinability) | 65 | 65 |
PROCESSING
Forging
Preheat the steel carefully, heat to 1150 oC – 1200 oC maximum, hold until temperature is uniform throughout the section.
Do not forge below 850 oC.Following forging operation the work piece should be cooled as slowly as possible.
AISI 4140 Steel Grade Heat Treatment
Hardening of AISI Alloy Steel 4140
AISI alloy 4140 steel bar, plate and square can be hardened by cold working, or heating and quenching.
SAE 4140 alloy steel is usually supplied ready heat treated to hardness in 18-22 HRC. If further heat treatment is required, then heat to 840 oC – 875 oC, hold until temperature is uniform throughout the section, soak for 10 – 15 minutes per 25 mm section, and quench in oil, water, or polymer as required.
What we can offer?
-We offer a wide range of steel products in a wide variety of dimensions and executions, according to the common international specifications or customize.
-Machining and heat treatment are available.
-Also, we advise you in choosing the right materials.
Shape Available
Our Advantages
OUR MAIN PRODUCTS ARE LISTED AS BELOW
Notes:
Available Size:
-Round: Dia. 4-1600 mm
-Flat: T. 10-120 mm x W. 60-810 mm
-Block: T. 80-1200 mm x W. 100-1600 mm
PAYMENT AND SHIPPING
1. Both T/T and L/C will be acceptable
2. Trade Terms: FOB, CIF, CFR
3. The delivery will be in 10-15 days if have stock; For customized items, the delivery will be negotiated by both parties
4. Shipping by sea freight from Shanghai Port (PRC) for Bulk orders, by airfreight or express for samples
COMPANY INFORMATION
Shanghai Unite Steel Trading Co., Ltd
We are committed to integrate engineering steel resources in china and serve the global engineering steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national famous steel enterprise.
In the aspect of resources and information, we have established cooperative and stronger relationship with nearly hundred enterprises, either state-owned or private owned in china.
What’s more, we have built long, deep and close business relationship with dozens of steel company, Sharing and holding equities with several steel enterprises. Because of the close cooperation with steel companies and our pioneering spirit, which can ensure us stay at the top competition, and ensure our customers get what they really want!
FAQ
Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.
Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material doesn't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.
Q: What is the payment term?
A: T/T or L/C.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up when you come.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Trading Company,Seller
Year Established:
2010
Total Annual:
10000000-25000000
Employee Number:
50~110
Ecer Certification：
Active Member
We, Shanghai Unite Steel are committed to integrate engineering steel resources in china and serve the global engineering steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national... We, Shanghai Unite Steel are committed to integrate engineering steel resources in china and serve the global engineering steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national...
Get in touch with us
Leave a Message, we will call you back quickly!