Continuous Forced Circulation Brine Mvr Evaporator 440V For Seawater Desalinatio

Product Specification

    Continuous China Good Quality Consumption Forced Circulation Brine Mvr Evaporator for Seawater Desalination

Introduction
Mechanical vapor recompression (MVR) evaporator uses two steam generated in the evaporator, the compressor, pressure, temperature, enthalpy increase, and then sent to the heating chamber of the evaporator as heating steam, feed liquid to maintain the boiling state, and heating steam is condensed into water. In this way, the original steam abandoned has been fully utilized, the latent heat recovery, and improve the thermal efficiency and economy of steam is equivalent to 30 effect evaporation, reducing the external heating and cooling resource demand, reduce energy consumption, reduce pollution.

Usage

Mechanical vapor recompression (MVR) evaporator, suitable for low temperature concentration in milk, glucose, organic acid, VC, xylose, pharmaceutical, chemical, biological engineering, environmental engineering, waste recycling, papermaking, salt and other industries.

Main Characteristic

1. MVR energy-saving evaporator technology is currently the most sophisticated evaporator technology available. It uses very little steam during normal operation and very little steam during startup, which significantly lowers operating costs and lessens environmental pollution.

2. Due to the compressor being used as a heat source, compared to a standard evaporator, the temperature differential is much lower, allowing for moderate evaporation, a significant improvement in product quality, and a decrease in fouling.

3. The structure and procedure are very straightforward, totally automatic, continuous, safe, and dependable. The condenser is optional, or only a small portion of it is required.

4. equipped with CIP cleaning pipeline, can be achieved on-site cleaning, the whole set of equipment is easy to operate, no dead angle.

5. the evaporator is the material at low temperature (evaporation temperature 35 degrees -100 degrees Celsius), and no foam in the state of evaporation, uniform liquid, no running material, not easy to coke, material heating denaturation minimum.

Technical characteristics

1,Low energy consumption,low operation cost
2,Small space occupation
3,Require fewer public utilities and less total investment
4,Stable operation and high degree of automation
5,Require no primary steam
6,Short retention time due to frequently used single effect
7,Simple process,high practicability,and excellent service performance at some loads
8,Low operation costs
9,Capable of evaporating at and below 40 celsius without any refrigerating plant and therefore particulary suitable for heat sensitive materials.

Machining & Assembling Workshop

Tag: energy saving MVR evaporator;MVR industrial evaporator