Jiangsu Hanpu Mechanical Technology Co., Ltd
| Supply Ability | 1sets per 3 months |
| Delivery Time | 120days |
| Packaging Details | Pallet or Wooden case |
| Brand Name | Hanpu |
| Model Number | MVR |
| Certification | CE ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
MVR Mechanical Vapor Recompression Evaporator For Waste Water Concentration
Forced Circulating Multi Effect Concentration MVR Evaporator System
Pillow Plate Heat Transfer Equipment For Mechanical Vapour Recompression
High Heat Transfer Coefficient MVR Evaporator , Tubular Forced Circulation
Product Specification
| Supply Ability | 1sets per 3 months | Delivery Time | 120days |
| Packaging Details | Pallet or Wooden case | Brand Name | Hanpu |
| Model Number | MVR | Certification | CE ISO |
| Place of Origin | China | ||
| High Light | NaCl MVR Evaporator ，5T/HR MVR Evaporator ，NaCl Horizontal Tube Evaporator | ||
Duplex stainless steel DSS2205 MVR horizontal-tube evaporator engineered for NaCl brine concentration and crystallization at a nominal 5 t/h water removal. Mechanical Vapor Recompression (MVR) recycles latent heat to minimize steam consumption while horizontal calandrias provide robust heat transfer for saline, scaling-prone service.
Clarified brine is concentrated under vacuum. The MVR compressor elevates vapor temperature/pressure and reuses it as the primary heating medium in the horizontal-tube calandria. Optimized ΔT/LMTD, circulation rate, and slurry density stabilize supersaturation for predictable NaCl crystallization at low specific energy.
Wetted parts: DSS2205 (UNS S32205/S31803). Options: super duplex, SS316L, or Ti for special chemistries. Drainable layouts, smooth finishes, and CIP provision support long campaigns and fast turnarounds.
| Parameter | Typical Target / Range* |
|---|---|
| Evaporation rate | 5 t/h (water removal), adjustable via compressor VFD |
| Operating mode | Vacuum, continuous |
| Electric use (MVR) | ~15–40 kWh per ton H₂O evaporated (duty/CR dependent) |
| Fresh steam demand | Very low after start-up (backup/ancillary only) |
| Crystal size bands | Fine 0.2–0.5 mm; Table 0.5–1.2 mm; Coarse 1.2–2.5 mm |
| Materials | DSS2205 wetted; super duplex/316L/Ti optional |
*Performance depends on brine composition, scaling tendency, compression ratio, and exchanger/crystallizer design.
Duplex metallurgy offers higher chloride SCC resistance and strength, enabling thinner walls and better lifecycle in saline duty.
Yes—commonly paired with RO/NF upstream and crystallizer/centrifuge/dryer downstream for solids discharge.
Proper softening/pH control, optimized ΔT/velocity, antiscalant dosing, and scheduled CIP maintain high heat-transfer rates.
Company Details
Business Type:
Manufacturer
Ecer Certification：
Verified Supplier
Jiangsu Hanpu Mechanical Technology Co., Ltd. is a project engineering company jointly established by Jiangsu Zhongyi Environmental Technology Co., Ltd., FERREO A/S in Denmark, Shanghai Jiaotong University and Nanjing Kingreat Machinery Co., Ltd. The company's production base is located in the H... Jiangsu Hanpu Mechanical Technology Co., Ltd. is a project engineering company jointly established by Jiangsu Zhongyi Environmental Technology Co., Ltd., FERREO A/S in Denmark, Shanghai Jiaotong University and Nanjing Kingreat Machinery Co., Ltd. The company's production base is located in the H...
Get in touch with us
Leave a Message, we will call you back quickly!