Guangzhou Zhengqi Technology Co., Ltd.
| Model NO. | PGB-1200 |
| Glue Type | Ab Glue |
| Application | Machinery & Hardware |
| Driven Type | Electric |
| Packaging | Cartons |
| Xyz Working Area | 700 X 700 X 30mm |
| Size | L1500xw1200xh1500mm |
| Weight | 260kg |
| Ratio | From 1:1 to 10:1 |
| Stiring Method | Static or Dynamic |
| Pump | Daheng Patent Plunger Pump |
| out-Gluing Rate | 5-66g/5s |
| Mixing Precision | +/-1% |
| Container Volume | a:25L B:10L |
| Name | LED Driver Glue Dispenser |
| Transport Package | Quality |
| Specification | CE |
| Trademark | Daheng or OEM |
| Origin | Guangzhou China |
| HS Code | 8424899990 |
| Supply Ability | 50PCS / Month |
| Package Size | 100.00cm * 100.00cm * 100.00cm |
| Package Gross Weight | 100.000kg |
| Automatic Grade | Automatic |
| Gluing Mode | Piston / Plunger Pump |
| Packaging Material | LED Display |
| Customization | Available | Customized Request |
| Shipping Cost | about shipping cost and estimated delivery time. |
| Initial Payment Full Payment | |
| Currency | US$ |
| Return&refunds | You can apply for a refund up to 30 days after receipt of the products. |
View Detail Information
Explore similar products
High Precision Silicone Glue Dispenser Semiautomatic Grade and Customized
600x400x100mm Daheng PGB-810 ab Two Parts Glue Machine with Gear Pump Screw Pump
Semiautomatic and High Precision 3 Axis Robot Dispensers for Textile Industry
180kg Capacity Automatic Electric Two-component Adhesive Filling Machine for
Product Specification
| Model NO. | PGB-1200 | Glue Type | Ab Glue |
| Application | Machinery & Hardware | Driven Type | Electric |
| Packaging | Cartons | Xyz Working Area | 700 X 700 X 30mm |
| Size | L1500xw1200xh1500mm | Weight | 260kg |
| Ratio | From 1:1 to 10:1 | Stiring Method | Static or Dynamic |
| Pump | Daheng Patent Plunger Pump | out-Gluing Rate | 5-66g/5s |
| Mixing Precision | +/-1% | Container Volume | a:25L B:10L |
| Name | LED Driver Glue Dispenser | Transport Package | Quality |
| Specification | CE | Trademark | Daheng or OEM |
| Origin | Guangzhou China | HS Code | 8424899990 |
| Supply Ability | 50PCS / Month | Package Size | 100.00cm * 100.00cm * 100.00cm |
| Package Gross Weight | 100.000kg | Automatic Grade | Automatic |
| Gluing Mode | Piston / Plunger Pump | Packaging Material | LED Display |
| Customization | Available | Customized Request | Shipping Cost | about shipping cost and estimated delivery time. |
| Initial Payment Full Payment | Currency | US$ | |
| Return&refunds | You can apply for a refund up to 30 days after receipt of the products. | ||
| High Light | epoxy glue potting machine ，2 component glue potting machine ，2 component epoxy potting machine | ||
| Working area | 700mmx 700mm×100mm |
| Output Speed | 0.5g/s -12g/s (per single pump)adjustable Example: 1:1 ratio max output 24g/s 10:1 ratio max output 13.4g/s |
| processing craft | Dot ,line , arc , circle |
| Speed | 0---250mm/s |
| Movement accuracy | ≤±0.1mm |
| Mixing ratio | 100:100 ---100:10 |
| Gluing-out speed | 1g/s --12g/s per single pump (Max dispensing volume is base on two part Ratio) |
| Repeated accuracy | ≤±2% |
| Program memory | 999pcs |
| Adhesive viscosity | 300cps~20000cps |
| Operating mode | Manual /Automatic / third party signal |
| Proportional control | PLC/ double cylinder plunger pump |
| Flow control | Digital input |
| Program | Teaching program |
| Automatic controlling system | Touch screen / hand terminal |
| Mixing way | Dynamic mixing |
| Cleaning way | Self-cleaning |
| Glue Tank | Stainless tank A (25L) B(25L) |
| Vacuum defoamation(-0.1MPa),4L/s | |
| Liquid level sensor and sound light alarm | |
| Tank stirring | |
| Power supply | 220V/50Hz/3500W |
| Input air pressure | 0.4MPa-0.7MPa |
| Dimension | |
| Materials | Industrial aluminium+stainless material |
Drops always happened when valve closed . The reason may be low concentration of glue , big air-pressure or large diameter of needles.
Narrow needles will effect the flow of the liquid and cause back pressure . It will lead to dropping when the valve closed . Too narrow needles will effect the drainage of air when valve start to work, but it can be solved if change suitable needles .
Conical needles with less back pressure and liquid flow smoothly .
It is better to drainage of the air advance or use no-foam glue or deaeration to avoid the air cause dropping after valve closed .
The problem cause mainly because of the storage flow pressure tank or air pressure is not stable.
Inlet pressure regulating table should be set lower 10-15psi than factory minimum pressure . The pressure in pressure tank should be set upper than the middle pressure of regulating table . It should be avoided to use the pressure lower than the middle pressure of regulating table .
Control pressure of rubber valve at least higher than 60psi to assured glue evenly .
We should check the glue output speed at last . The glue is uneven if the time less than 15/1000s , the output speed more longer , the glue dispensing will be more stable .
It should be changed the pipe from 1/4 to 3/8 if the flow velocity too slowly .
The pipe is the shorter the better if no requirement .
Excessive fluid pressure and short valve opening time may lead to the air infiltration liquid . We can use the conical needles and reduce fluid pressure .
This problem is caused by heavy moisture and recycle instant glue . We should make sure to use new instant glue and wash the pipes with dry . Make sure air dry and add filter between plant air pressure and valve .
Make sure to use black pipeline.
Don't add new UV glue to old UV glue in pressure tank , we should drain off the old UV glue before pouring new UV glue into pressure tank because the UV glue will produce bubble after a period of time and lead to glue dispensing unevenly .
Normally , it may cause air problem if the needle less than NO.20 . It is better to use large steel needles or conical needles to avoid to use winding needles
It is better to use storage pressure cylinder of methybenzene toluene to self-cleaning one time for each shift . The more frequently cleaning the better .
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2003
Total Annual:
5000000-22000000
Employee Number:
100~120
Ecer Certification：
Verified Supplier
Company Introduction Guangzhou Zhengqi Technology Co., Ltd. recognized as a national high-tech enterprise, specializes in automation system integration and services, offering cutting-edge products and solutions to global markets. Guangzhou Daheng Automation Equipment Co., Ltd. operates as a wholly... Company Introduction Guangzhou Zhengqi Technology Co., Ltd. recognized as a national high-tech enterprise, specializes in automation system integration and services, offering cutting-edge products and solutions to global markets. Guangzhou Daheng Automation Equipment Co., Ltd. operates as a wholly...
Get in touch with us
Leave a Message, we will call you back quickly!