guangqing(anhui)gas technologies co.,ltd.
| Payment Terms | T/T |
| Supply Ability | 1200pcs per 8weeks |
| Delivery Time | 8 weeks |
| Packaging Details | carton |
| Material | Aluminum |
| Fuel Type | LPG Liquid/Vapor and Natural Gas |
| Operating Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| HP/KW Rating | 325 hp (242.3 kW) LPG; 200 hp (150 kW) where lower water flow-rate is a factor. |
| Applications. | Stationary, mobile, industrial, and automotive |
| Inlet Pressure | Maximum 312 psi (21.51 Bar); Minimum 30 psi (207 kPa) |
| Mounting Position | Vertical (outlet down) recommended |
| Diaphragm Material | Hydrin |
| Brand Name | IMPCO |
| Model Number | MODEL PE |
| Certification | UL |
| Place of Origin | USA |
View Detail Information
Explore similar products
IMPCO Large Size Engine Mixer 200DM , Dual Diaphragm Air-Valve Mixer , Several
LPG Liquid 100hp IMPCO Model J Regulator Fuel System Parts
Max 250psi Two Stage T60 IMPCO Regulator For LPG
Fluorosilicone Diaphragm Impco Cobra Regulator Fuel System Parts
Product Specification
| Payment Terms | T/T | Supply Ability | 1200pcs per 8weeks |
| Delivery Time | 8 weeks | Packaging Details | carton |
| Material | Aluminum | Fuel Type | LPG Liquid/Vapor and Natural Gas |
| Operating Temperature Range | -40°F to +250°F (-40°C to +121°C) | HP/KW Rating | 325 hp (242.3 kW) LPG; 200 hp (150 kW) where lower water flow-rate is a factor. |
| Applications. | Stationary, mobile, industrial, and automotive | Inlet Pressure | Maximum 312 psi (21.51 Bar); Minimum 30 psi (207 kPa) |
| Mounting Position | Vertical (outlet down) recommended | Diaphragm Material | Hydrin |
| Brand Name | IMPCO | Model Number | MODEL PE |
| Certification | UL | Place of Origin | USA |
| High Light | 350HP Industrial Engines Regulator ，impco Industrial Engines Regulator ，Aluminum impco Regulator | ||
| SPECIFICATIONS | |
| Fuel Type | LPG Liquid/Vapor and Natural Gas |
| Inlet Pressure | |
| Maximum | 312 psi (21.51 Bar) |
| Minimum | 30 psi (207 kPa) |
| Outlet Pressure (Nominal) | |
| EB | -1.5” w.c. (-0.37 kPa) |
| EO | -5.0” w.c. (-0.12 kPa) |
| PE | +5.0” w.c. (1.2 kPa) |
| HP/kW Rating | 325 hp (242.3 kW) LPG 200 hp (150 kW) where lower water flow-rate is a factor. |
| Operating Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Fuel Filtration Required | 40 micron |
| Heating Chamber Source | Required for liquid LPG |
| Mounting Position | Vertical (outlet down) recommended. Horizontal position can be used when fuel contamination can be controlled with HD-5 specified LPG fuel |
| Diaphragm Material | Hydrin, Silicone, and Fluorosilicone (optional) |
| Applications | Stationary, mobile, industrial, and automotive |
| Certification | UL (AU2317 & AU1502), Inquire for specific ECE approval |
Franz is pretty well right on the money with his comments. The P stands for positive pressure. These regs put out 3" to 6" positive pressure WC. They are used strictly for NG.
The reason for the 200 VS 350 HP rating on an EB reg is the application. The reg is rated at 200HP for industrial engines. Industrial engines usually run at a fixed 1800 RPM and the water pump is geared different then automotive applications. The limited water supply means the reg is derated to 200HP. On vehicles the water pump can increase suction as the RPM is quite high at full throttle. This means more flow and heat for the reg so the HP rating is higher.
Lastly, personal opinion, I prefer the E over the L. The E has a water chamber the size of the reg. Heat transfer is great. The L has a U shaped tunnel through the reg and heat transfer on a cold engine is poor and wide open throttle is no where near as good as the E for heat transfer. In addition the L has a primary seat activated by tank pressure. The L seems to have more P seat problems than the E. We experienced a higher number of problems with the L's at our shop.
Company Details
Business Type:
Distributor/Wholesaler
Year Established:
2008
Employee Number:
15~50
Ecer Certification：
Active Member
Guangqing (Anhui) Gas technologies Co., Ltd. started operating in 2008, as authorized distributor of IMPCO for over 12 years, have been providing to our customers fuel combustion system and full range of off-road &on-road parts on forklift trucks, light/ heavy- duty trucks, buses, generators. ... Guangqing (Anhui) Gas technologies Co., Ltd. started operating in 2008, as authorized distributor of IMPCO for over 12 years, have been providing to our customers fuel combustion system and full range of off-road &on-road parts on forklift trucks, light/ heavy- duty trucks, buses, generators. ...
Get in touch with us
Leave a Message, we will call you back quickly!