Xi'an Kacise Optronics Co.,Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 1000 Piece/Pieces per Week negotiable |
| Delivery Time | 5-8 work days |
| Packaging Details | each unit has individual box and all boxes are packed in standard packages or customers requests available |
| Measuring medium | Liquid |
| Measuring range | 0.1m~30m |
| Process connection | Flange ≥DN80 |
| Process temperature | -40～200℃ |
| Process pressure | -0.1～2.5 MPa |
| Antenna size | 44mm lens antenna |
| Antenna material | PTFE |
| Accuracy | ±2mm |
| Protection level | IP67 |
| Launch angle | 6° |
| Brand Name | KACISE |
| Model Number | KLD104 |
| Place of Origin | CHINA |
| Certification | CE |
View Detail Information
Explore similar products
4 - 20mA Output Fluid Level Meter Hygienic Tuning Fork Densitometer Insulation
High accuracy Submersible Water Liquid Level Sensor Transmitter For power,
High Frequency Radar Fluid Level Meter Hot Water Level Sensor No Pollution
70m Measuring Range Radar Type Level Transmitter 26GHz Frequency High Accuracy
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 1000 Piece/Pieces per Week negotiable |
| Delivery Time | 5-8 work days | Packaging Details | each unit has individual box and all boxes are packed in standard packages or customers requests available |
| Measuring medium | Liquid | Measuring range | 0.1m~30m |
| Process connection | Flange ≥DN80 | Process temperature | -40～200℃ |
| Process pressure | -0.1～2.5 MPa | Antenna size | 44mm lens antenna |
| Antenna material | PTFE | Accuracy | ±2mm |
| Protection level | IP67 | Launch angle | 6° |
| Brand Name | KACISE | Model Number | KLD104 |
| Place of Origin | CHINA | Certification | CE |
| High Light | Fluid Radar Level Meter ，PTFE Water Level Transmitter ，IP67 Radar Level Meter | ||
80G FM Radar Level Meter
Principle:
The general principle of the FM continuous wave radar level gauge is that the radar emits electromagnetic waves on the top of the tank, and the electromagnetic waves are received by the radar after being reflected by the medium. The frequency difference δf between the received signal and the transmitted signal is proportional to the distance R from the surface of the medium: R=C (speed)*δf (frequency difference)/2/K (frequency modulation slope). Because the speed of light C and the frequency modulation slope K are known, the frequency difference δf can be estimated to obtain the distance R from the radar installation position to the material surface, and then through the known total height of the tank, subtract the spatial distance from the radar to the material surface (referred to as Empty height) to get the height of the material level.
Characteristic:
1. Millimeter-wave radar, with a measurement accuracy of up to ±1mm, and a minimum blind area of 0.1m.
2. The smaller antenna size satisfies the measurement of more working conditions.
3. A variety of lens antennas, smaller launch angle, more concentrated energy, stronger echo signal, under the same industrial and mining conditions, compared to other radar products have higher reliability.
4. With stronger penetrability, it can be used normally even if there is adhesion and condensation.
5. The dynamic signal range is larger, and the measurement of low dielectric constant medium is more stable.
6. A variety of measurement modes, the radar reaction time in the fast measurement mode is less than 1S.
Technical parameter
| Measuring medium | Liquid |
| Measuring range | 0.1m~30m |
| Process connection | Flange ≥DN80 |
| Process temperature | -40～200℃ |
| Process pressure | -0.1～2.5 MPa |
| Antenna size | 44mm lens antenna |
| Antenna material | PTFE |
| Accuracy | ±2mm |
| Protection level | IP67 |
| Center frequency | 80GHz |
| Launch angle | 6° |
| Power source | Two-wire system/DC24V Four-wire system/AC220V Six-wire system/DC12-24V |
| Shell | Aluminum/Plastic/Stainless steel |
| Signal output | Two-wire system/4...20mA/HART protocol Four-wire system/4...20mA/HART protocol Six-wire system/4...20mA/HART protocol |
Communication and debugging
The instrument can be debugged through LDM in the field, and can also be debugged on the PC side with the optional host computer software. The connection between the meter and the PC is as follows:
to communicate with:
1. USB to RS485 serial cable (four-wire system);
2. USB to TTL serial cable (two-wire system);
3. USB to Hart-modem (two-wire system) for communication.
4. Through the mobile phone Bluetooth debugging, the on-site debugging is safer and more convenient.
5. 4G network, remote debugging through remote module.
Product Size (unit: mm)
Field application
Company Details
Business Type:
Manufacturer
Year Established:
2008
Total Annual:
8000000-10000000
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments . We have been specializing... Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments . We have been specializing...
Get in touch with us
Leave a Message, we will call you back quickly!