KLD804 Intrinsically Safe Flanged Mounted Radar Level Transmitter Higher

Product Specification

KLD804 80G FM Radar Level Sensor

Introduction

KLD804 76-81GHz frequency modulation wave FMCW radar product (also called millimeter wave radar), it uses a millimeter wave band with high frequency, it can detect smaller targets and achieve more precise positioning than microwave radar with higher resolution and stronger confidentiality. Therefore, it has important applications in long-distance target detection, strong smoke and dust environment, long-distance imaging, multi-spectral imaging, etc.

Feature

(1)Based on self-developed millimeter-wave radio frequency chip to achieve a more compact radio frequency architecture;
(2) Higher signal-to-noise ratio, almost unaffected by level fluctuations;
(3) The measurement accuracy is millimeter-level accuracy (1mm), which can be used for metrology-level measurement;
(4) The measurement blind area is small (3cm), and the effect of measuring the liquid level of small storage tanks is better;
(5) The beam angle can reach 3°, and the energy is more focused, effectively avoiding false echo interference;
(6) High frequency signal, can effectively measure the level of medium with low dielectric constant (ε≥1.5);
(7) Strong anti-interference, almost unaffected by dust, steam, temperature and pressure changes;
(8) The antenna adopts PTFE lens, which is effective anti-corrosion and anti-hanging material;
(9) Support remote debugging and remote upgrade, reduce waiting time and improve work efficiency;
(10) It supports mobile phone Bluetooth debugging, which is convenient for maintenance work of on-site personnel.

Casing Dimension

Unit in mm:

Installation Method

Flange Installation

When using flange installation, the minimum distance between the instrument and the tank wall should be 200mm.

• datum plane
• vessel center or axis of symmetry

Hoisting Installation

Note: Please avoid vibration, strong electromagnetic interference and loads during installation.

Misalignment method:
1. On-line calibration: on-site process equipment needs to stop production;
2. Reference point calibration: full scale setting;
3. Upper computer calibration: 250Ω resistor, Hart converter, USB interface are required.

Definition of 4G remote communication interface

• Communication interface: RS485 communication interface and Modbus-RTU protocol are supported.
• Physical interface: standard M20 industrial interface is seamlessly connected with instrument equipment.
• Material: high-strength 304 stainless steel shell, dustproof and explosion-proof
• Remote transmission: the built-in remote wireless transmission is seamlessly connected with the Feilian cloud platform.
• Software features: support PC and mobile terminal to view data directly.
• Protection grade: industrial protection grade IP67.
• Service conditions: ambient temperature: - 20 ℃ - 70 ℃ relative temperature: 5-85%.
• Storage temperature: - 40 ℃ - 85 ℃.
• Input voltage: support 12~24V wide voltage power supply. [Power requirement of power supply>10W, that is, output current of power supply ≥ 1A]
• Power consumption current: measured under 24V power supply:
• Communication transmission: average 30mA~60mA
• Online standby: 15mA~20mA on average
• Idle offline: 10mA~20mA on average

Xi'an Kacise Optronics Tech Co., Ltd considers itself a solution provider and manufacturer. We offer maximum flexibility and a cost-optimised offer for our OEM customers.

What we could provide:
The range includes customized shell version/color, thread type(G-Thread/NPT Thread), Customized Software, prints, manual and catalog. If you are interested in installing at your side, Radar Module is available for sure.