Suzhou Desisen(DSS) Electronics Co.,Ltd
| Payment Terms | T/T |
| Supply Ability | 100 sets |
| Delivery Time | 10-20 days |
| Packaging Details | wooden case |
| advanced | t adopts the most advanced DSP and FPGA digital electronic technology, far-field eddy current technology and microprocessor technology |
| Good performance | With multi-frequency, eddy current detection instrument advanced performance, especially with high sampling rate and ultra-low noise and high signal-to-noise ratio |
| Wide detection range | Used to detect a variety of metal parts testing equipment including signal power source, signal measurement, signal recording and processing, made into a tube can pass the form |
| Built-in lithium battery | A full charge lasts 6-8 hours |
| Brand Name | Suzhou Desisen (DSS) Electronics |
| Model Number | 598 |
| Certification | ISO 9001, CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Electromagnetic Eddy Current Tester for Cracked Welding Defect Test Equipment
Eddy current flaw detector Steering Knuckle Crack Detection FET-9HS
Gear Shaft Portable Eddy Current Flaw Detector In-line And Offline
Portable eddy current flaw detector FET-9HS for weld crack detection
Product Specification
| Payment Terms | T/T | Supply Ability | 100 sets |
| Delivery Time | 10-20 days | Packaging Details | wooden case |
| advanced | t adopts the most advanced DSP and FPGA digital electronic technology, far-field eddy current technology and microprocessor technology | Good performance | With multi-frequency, eddy current detection instrument advanced performance, especially with high sampling rate and ultra-low noise and high signal-to-noise ratio |
| Wide detection range | Used to detect a variety of metal parts testing equipment including signal power source, signal measurement, signal recording and processing, made into a tube can pass the form | Built-in lithium battery | A full charge lasts 6-8 hours |
| Brand Name | Suzhou Desisen (DSS) Electronics | Model Number | 598 |
| Certification | ISO 9001, CE | Place of Origin | China |
| High Light | Digital Eddy Current Flaw Detector ，Microprocessor Eddy Current Flaw Detector ，Portable Eddy Current Flaw Detector | ||
| Name | Portable Eddy Current Flaw Detector FET-9HS |
|---|---|
| Frequency range | 1 Hz ~ 20 MHz (far field frequency 1Hz ~ 20KHz); |
| Gain | 0 ~ 90dB, step 0.5dB |
| Phase rotation | 0 ~ 359° step 1 ° |
| Gain ratio (Y/X) | 0.1 ~ 10 |
| Gain/Phase Measurement | manual/automatic |
| Display Mode | Dot/Line/Fade |
| High-pass Filter | Off, 0 ~2000Hz |
| Low Pass Filter | Off, 10~2000kHz |
| Display | Semi-reflective LCD with backlight, suitable for long term observation in darkness or direct sunlight |
| scanning | erase, refresh and retain three scanning modes |
| filter | digital and analogue filter |
| Operating Temperature | -15~55℃ |
| Storage Temperature | -20~60℃ |
| Relative Humidity | not more than 85% |
| Operating Voltage | AC220±10V |
| With probe automatic zero system | |
| fast mode digital / proposed electronic balance | |
| automatic (manual) eddy current signal amplitude, phase measurement, eddy current signal slow (adjustable) expansion of playback | |
| time base scanning and impedance plane map on the same screen | |
| with the configuration of the analysis function | |
| with a unique non-equal amplitude phase / amplitude alarm domain | |
| the hardware alarm output port | |
| can be stored in a variety of massive testing procedures and test data | |
| automatic Amplitude, phase / defect depth curve display | |
| right-angle coordinate system and polar coordinate system background selection | |
| comes with lithium batteries (fully charged can be used for 6-8 hours) | |
| the number of points of digital filtering: 1 ~ 100 | |
| the hardware alarm output | |
| the alarm output signal |
We provide technical support and service to ensure our customers are satisfied with their Portable Eddy Current Flaw Detector. We offer both on-site and online support for all of our products.
Our on-site support team is available to help with any installation, troubleshooting, or maintenance related issues you may have with your Portable Eddy Current Flaw Detector. Our technicians can come to your location and help with any questions or problems you may have.
Our online support team is available 24/7 to help with any questions or issues you may have with your Portable Eddy Current Flaw Detector. We have a live chat feature on our website, as well as an online ticket system for more in-depth issues. Our team is always available to help.
A1: The brand name of this product is Desisen.
A2: The model number of this product is 598.
A3: This product is made in China.
A4: Yes, this product has ISO9001 certification.
A5: The minimum order quantity is 1.
Company Details
Business Type:
Distributor/Wholesaler,Manufacturer
Year Established:
1997
Total Annual:
15000000-30000000
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Suzhou Desisen (DSS) Electronics: Pioneering Non-Destructive Testing Solutions As a leading specialist in the research, development, and production of advanced non-destructive testing (NDT) systems, Suzhou Desisen (DSS) Electronics Co., Ltd.(苏州德斯森电子有限公司) delivers comprehensived... Suzhou Desisen (DSS) Electronics: Pioneering Non-Destructive Testing Solutions As a leading specialist in the research, development, and production of advanced non-destructive testing (NDT) systems, Suzhou Desisen (DSS) Electronics Co., Ltd.(苏州德斯森电子有限公司) delivers comprehensived...
Get in touch with us
Leave a Message, we will call you back quickly!