Fiberall Technology (Shenzhen) Co., Ltd
| Payment Terms | T/T, Western Union, MoneyGram,PayPal |
| Delivery Time | Upon Order Qty |
| Packaging Details | Bubble Wrap/Carton |
| Product Name | Rack Mounted PLC Splitter |
| Channel qty | 1x32 |
| Input Adapter | SC/APC Simplex |
| Output Adapter | SC/APC duplex |
| PLC splitter type | ABS module |
| Rack Dimension | Standard 1U 19” |
| Brand Name | Fiberall or OEM |
| Model Number | FA-PLCR1×32SA |
| Certification | RoHS |
| Place of Origin | China |
View Detail Information
Explore similar products
CATV / CCTV Links Fibre Optic Splitter , Fiber Optical Splitter LSZH / PVC
ABS Module Fiber Optic Coupler Splitter , Rack Mount PLC Splitter Average Ratio
Cassette Type Passive Optical PLC Splitter , SM Fiber Splitter For Fiber To The
High Accuracy FTTH Fiber Optic PLC Splitter With SC Connector Low Insertion Loss
Product Specification
| Payment Terms | T/T, Western Union, MoneyGram,PayPal | Delivery Time | Upon Order Qty |
| Packaging Details | Bubble Wrap/Carton | Product Name | Rack Mounted PLC Splitter |
| Channel qty | 1x32 | Input Adapter | SC/APC Simplex |
| Output Adapter | SC/APC duplex | PLC splitter type | ABS module |
| Rack Dimension | Standard 1U 19” | Brand Name | Fiberall or OEM |
| Model Number | FA-PLCR1×32SA | Certification | RoHS |
| Place of Origin | China | ||
| High Light | plc fiber optic splitter ，abs box plc splitter | ||
FA-PLCR1×32SA , Full Loaded 1U 19 Inch Rack Mounted Fiber Optic PLC Splitter With SC/APC Adapter
The main encapsulation process of fiber optic PLC splitter is as follows:
1, Coupling alignment preparations: clean the waveguide and install it carefully to the waveguide frame; then clean the fiber, install one end on the precise adjusting frame of the incident end, and connect the other end with the light source (first 6.328 micron red light, it will more convenient for observation when debug light pass).
2, Observe the position of the fiber and waveguide at the incident end by microscopic observation system, and manually adjust the parallelism and end face spacing between fiber and waveguide according to computer instructions.
3, Open the laser light source, according to the image of X axis and Y axis observed by the micro system, and the light spot of the waveguide output end, to preliminarily judge the coupling and alignment situation between the fiber and the waveguide at the incident end, so as to achieve the good light transmission effect when the fiber and the waveguide are butted.
4, When the spot of the waveguide output achieve ideal effect, remove the microscopic observation system.
5, Clean the first and eighth channels of fiber array (FA) at waveguide output end and dry them by blowing balloons. Then use same method in (2) step to connect and adjust the waveguide output end and optical fiber array to the proper position. Then connect it to the two probe interface of the dual channel power meter.
6, Change the light source with 6.328 micron wavelength at incident end of fiber array to be light source with 1.310/1.550 micron wavelength, start the optical power search program to automatically adjust the position between output waveguide and fiber array, drive the optical power to be maximum value at the output end of the waveguide, and the optical power values of two sampling channels should be equal (i.e., automatic adjust the output end of optical fiber array and to achieve precise alignment with incident side of waveguide, thereby improving the overall coupling efficiency).
7, When the output power of the optical fiber array of the waveguide output reaches the maximum value and equal to the same value, then the dispensing can start.
8, Repeat step 6 again, looking for the maximum optical power received by the fiber array of waveguide output, in order to ensure the optimal coupling alignment between the waveguide and the fiber array after the dispensing, and solidify it, and then carries out the subsequent operation to complete the encapsulation.
Order Options Of Rack Type PLC Splitter
| Parameter | Options |
| Product name | Rack mounted fiber plc splitter |
| Channel | 1X2, 1X4, 1X8, 1X16, 1X32, 1X64, 2X2, 2X4, 2X8, 2X16, 2X32, 2X64 |
| Rack Dimension | 1u or 2u height and 19 inch width |
| PLC Type | Mini steel tube or ABS box |
| Wavelength | 1260 to 1650nm |
| Optical ratio | Average |
| Input /Output Cable |
0.9mm , 2.0mm , 3.0mm 1.5 meters or Customized |
| Jacket of Input / Output Cable | PVC or LSZH |
| Connector/Adapter Type | SC, LC, FC, ST, and so on |
| End Polishing | PC, UPC ( SPC ) or APC |
| Fiber Type | SM G657A1 fiber or Appointed |
| Test report | Available |
| RoHS | Compliant |
| Other | Customized Label, Customized Print |
Company Details
Business Type:
Manufacturer
Year Established:
2007
Total Annual:
2000000-3500000
Employee Number:
100~120
Ecer Certification：
Active Member
Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; mainte... Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; mainte...
Get in touch with us
Leave a Message, we will call you back quickly!