Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days |
| Packaging Details | Export packing |
| Height adjustment range | 250~800mm |
| Height adjustment method | Manual adjustment |
| Rotation speed | 5~15 rpm |
| Rotation diameter | ø76mm |
| Test station | Single station |
| Drive method | Servo drive |
| Brand Name | Sinuo |
| Model Number | SNQC1012B |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
DIN 75220 Electric Vehicle Solar Simulation Test Chamber Halogen Lamp Test
EVSE Slow Fast Charging Electrical Safety Testing Equipment Power Battery REESS
DIN 75220 Electric Vehicle Testing Equipment Spectrum Solar Simulation Radiation
Automotive Car Water Ingress Rain Spray Test Chamber Electric Vehicle Passenger
Product Specification
| Payment Terms | T/T | Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days | Packaging Details | Export packing |
| Height adjustment range | 250~800mm | Height adjustment method | Manual adjustment |
| Rotation speed | 5~15 rpm | Rotation diameter | ø76mm |
| Test station | Single station | Drive method | Servo drive |
| Brand Name | Sinuo | Model Number | SNQC1012B |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Terminal Mechanical Stress Tester ，Electrical Connectors Mechanical Stress Tester | ||
Wire Damage Testing Device Terminal Mechanical Stress Tester for Electrical Connectors
Complied Standards & Clauses
This testing device conforms to UL486A-B clause 9.3.2.1, clause 9.3.2.3, clause 9.3.2.4 and table 26 and figure 6, IEC60947-1, etc.
Product Overview
Specimens and restrictions: Screw terminals, threadless terminals and connectors.
Test purpose: To examine whether the screw terminals and threadless terminals can withstand the mechanical stresses that occur during normal use. It is mainly used to judge whether the design and structure of the thread clamping terminal block meet the requirements of not excessively damaging the wire when clamping the wire.
Testing principle: Using guide rail screw structure. The number of tests can be preset before use. When the set value is reached, the machine will automatically stop and sound an alarm signal.
Technical Parameters
| Control and operation | PLC control, touch screen operation |
| Test station | Single station |
| Drive | Servo drive |
| Fixture | 1. The centering locking fixture meets the requirements of terminal blocks with length, width and height of 60*70*90mm respectively. The fixture has the characteristics of quick replacement. 2. Equipped with additional mounting plate, size 300mm*250mm, which can be used interchangeably with the centering locking clamp. 3. The maximum distance between the mounting plate and the rotation center is 120mm, adjustable |
| Rotation speed | 5~15 rpm, can be preset on the touch screen, (UL486A-B requires 9 rpm) |
| Rotation diameter | Adopting double-hole rotating disc, diameter ø76mm |
| Number of tests/time | 1. 0-999999, it will automatically stop when the preset number of tests is reached. 2. The test time can be switched to 0-9999min according to different standard requirements, and can be preset. It will automatically stop when the preset test time is reached. |
| Load weight | A set of weights can achieve 0.7, 0.9, 1.4, 2.3, 3.6, 4.5, 6.8, 8.2, 11.4, 13.6, 18.2, 22.7, 25, 27.2, 34.1, 36.3, 40.9, 45.4, 49.9, 54.5, 70.4, 81.7, 93.1, 109. Unit: Kg, weight hook is included in the total weight |
| Height adjustment range | 250~800mm, adjustable, with scale indicator |
| Height adjustment method | Manual adjustment |
| Busing diameter | UL486A-B Configuration: 6.4, 9.5, 12.7, 14.3, 15.8, 19.1, 22.2, 25.4, 28.6, 31.8, 34.9, 38.1, 44.5, 50.8, 54mm |
| Sample specification selection (see attached table) | UL486A-B Table 26 |
| Weight lifting mechanism | Equipped with electric lifting mechanism, large-size weight tray to prevent falling |
| Power supply | Single phase 120V, 50Hz |
Details
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!