Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Delivery Time | 30 days |
| Supply Ability | 30 Sets / Month |
| Packaging Details | Plywood Case |
| Applied Standard | IEC 62196-3，clause 36.3 |
| Apparatus Power | Customized |
| Control Method | PLC control, touch screen operation |
| Test Station | Single station |
| Drive Mode | Servo motor |
| Equipped Force | 0-500N |
| Holding Time | 0-999.9s |
| Interval Time | 0-999.9s |
| Brand Name | Sinuo |
| Model Number | SNQC1017 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC62196 Electric Vehicle Connector Plug Drive Over Test Equipment 5000N
IEC62196 EV Connector Testing Equipment Plugs Temperature Rise Test System
EV Glow Wire Test Apparatus PLC Control IEC 62196 Glow Wire Test Equipment
IEC 62196 Electric Vehicle Air Saturated Test Chamber 304 Stainless Steel
Product Specification
| Payment Terms | T/T | Delivery Time | 30 days |
| Supply Ability | 30 Sets / Month | Packaging Details | Plywood Case |
| Applied Standard | IEC 62196-3，clause 36.3 | Apparatus Power | Customized |
| Control Method | PLC control, touch screen operation | Test Station | Single station |
| Drive Mode | Servo motor | Equipped Force | 0-500N |
| Holding Time | 0-999.9s | Interval Time | 0-999.9s |
| Brand Name | Sinuo | Model Number | SNQC1017 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Single Station Plugs ev test equipment ，IEC62196-3 ev test equipment ，Connectors misalignment test apparatus | ||
IEC62196-3 Electric Vehicle Single Station Plugs And Connectors Misalignment Test Apparatus
Complied Standards & Clauses
This misalignment test apparatus conforms to IEC62196-3 clause 36.3, figure 18.
Equipment Overview
During temperature rise test, immediately following temperature stabilization, the accessories are subjected to external mechanical loads as illustrated in Figure 18.
Using a force gauge, apply a load of 100 N with a tolerance of -0/+10 N as illustrated in Figure 19 in each direction. The load should be applied for a minimum of 1 min. Following this load application, the load should be removed for a time of 10 s and the load re-applied in the next direction within 10 s. This process is continued until the load is applied in the 4 directions (-X, +X, -Y, +Y) as illustrated in Figure 19.
The equipment adopts X, Y (Figure 19) sliding table, driven by servo motor and monitored by force value sensor. When the force value reaches the required time for automatic constant force holding, it will automatically switch to another direction for test.
Technical Parameters
| Power | AC220V, 60Hz |
| Control Method | PLC control, touch screen operation |
| Station | One |
| Drive Mode | Servo motor, two pcs, X and Y |
| Force | 0-500N |
| Force holding time | 0-999.9s |
| Interval time | 0-999.9s |
| Force application direction | -X, +X, -Y, +Y |
| Specimen mounting bracket | 30 ° slope, 1000mm height from the ground |
| Overall dimensions of equipment | 100mm×400mm×1500mm,150kg |
This apparatus is conforms to these Standard Figures:
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!