V.K.Y Guangzhou International Trade Co., Ltd.
| Tank Sealing Interface | Automated Precision Crimping with EPDM Gaskets |
| OEM No | 2069016300-ZC |
| Supply Ability | 100000 piece/per month |
| Suitable for Car | Geely |
| Hose Connection Port Diameter | OD 28 mm Quick-Latch Fittings |
| Payment Terms | L/C,D/A,D/P,T/T,Western Union |
| Applicable Mod | Geely Geometry A G6 / Emgrand GSE |
| Max Coolant Flow Throughput | Up to 80 Liters / Minute High-Velocity Line |
| Operational Thermal Range | -40°C to +125°C Continuous Limits |
| Quality Leak Test Verification | 100% Helium Mass Spectrometer Inspected |
| Delivery Time | 5-8 work days |
| Micro-Channel Tube Wall Spec | 0.28 mm High-Frequency Welded Aluminum |
| Packaging Details | 75 × 8 × 5cm, Gross Weight: 0.45 - 0.50 kg |
| Model Number | Geely Geometry A G6 |
| Brand Name | Geely |
| Place of Origin | Chinese mainland |
| Certification | IATF 16949:2016/CCC /E-Mark/ISO 9001:2015 |
View Detail Information
Explore similar products
OEM Car Maintenance Parts Wiper Blades Replacement For BYD Song Pro
BYD Tang Car Maintenance Parts Wiper Blades IP65 Waterproof SA3W-5205110 / SA3W
ODM Auto Car Maintenance Parts Windshield Wiper Blades For BYD ATTO 3
Noise Reduction Car Maintenance Parts Premium Ceramic Brake Pads For MG4 EV
Product Specification
| Tank Sealing Interface | Automated Precision Crimping with EPDM Gaskets | OEM No | 2069016300-ZC |
| Supply Ability | 100000 piece/per month | Suitable for Car | Geely |
| Hose Connection Port Diameter | OD 28 mm Quick-Latch Fittings | Payment Terms | L/C,D/A,D/P,T/T,Western Union |
| Applicable Mod | Geely Geometry A G6 / Emgrand GSE | Max Coolant Flow Throughput | Up to 80 Liters / Minute High-Velocity Line |
| Operational Thermal Range | -40°C to +125°C Continuous Limits | Quality Leak Test Verification | 100% Helium Mass Spectrometer Inspected |
| Delivery Time | 5-8 work days | Micro-Channel Tube Wall Spec | 0.28 mm High-Frequency Welded Aluminum |
| Packaging Details | 75 × 8 × 5cm, Gross Weight: 0.45 - 0.50 kg | Model Number | Geely Geometry A G6 |
| Brand Name | Geely | Place of Origin | Chinese mainland |
| Certification | IATF 16949:2016/CCC /E-Mark/ISO 9001:2015 | ||
| High Light | E-Drive System Fluid Heat Exchanger for Geely ，Geely Geometry A G6 heat exchanger ，Emgrand GSE fluid heat exchanger | ||
2069016300-ZC E-Drive System Fluid Heat Exchanger for Geely Geometry A G6 / Emgrand GSE
Product Introduction
Engineered specifically for the high-power-density electric drive architecture of Geely’s EV platform—including the Geometry A, Geometry G6, and Emgrand GSE—this primary e-drive fluid heat exchanger directly replaces OEM part 2069016300-ZC. It provides active temperature regulation for the traction motor assembly, power control unit (MCU), and onboard charging electronics.
Specification
| Parameter / Engineering Metric | Specification / Factory Standard |
| OEM Cross-Reference Number | 2069016300-ZC |
| Target Vehicle Application | Geely Geometry A / Geometry G6 / Emgrand GSE EV |
| System Thermal Loop | E-Drive Motor & MCU Power Electronics Loop |
| Heat Exchanger Architecture | Single-Row Micro-Channel Downflow Core |
| Core Alloy Material | AA3003 Corrosion-Resistant Aluminum |
| Composite Vessel Material | PA66 + 30% Glass-Fiber Reinforced Nylon |
| Brazing Technology | Nocolok Controlled Atmosphere Brazing (CAB) |
| Max Working Pressure Rating | 90 kPa – 130 kPa Nominal System Pressure |
| Hydrostatic Burst Test Limit | Exceeds 250 kPa Safety Threshold |
| Coolant Compatibility | Low-Conductivity OAT Ethylene Glycol Formulations |
Key Features
3D-Mapped OE Geometry Alignment: Built using direct spatial scans of the original 2069016300-ZC housing, guaranteeing precise retention pin seating, factory fan shroud mounting, and stress-free alignment for quick-disconnect coolant lines.
Low-Hydraulic-Resistance Micro Channels: Built with high-frequency welded AA3003 aluminum tubing designed to keep internal pressure loss below 15 kPa at nominal flow rates, ensuring steady coolant turnover under heavy thermal loads.
Structural Polymer Tank Assemblies: End tanks are injection-molded from heat-stabilized PA66-GF30 engineering composite and crimped with dynamic EPDM seals to prevent seam leakage under continuous pressure pulses and thermal expansion.
Dynamic Helium Mass Spectrometer Testing: Every production unit is subjected to automated multi-bar pressure decay and helium trace-gas inspection prior to boxing, eliminating micro-porosity and guaranteeing long-term fluid containment.
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2015
Total Annual:
1-2.5
Employee Number:
100~200
Ecer Certification：
Verified Supplier
Who We AreV.K.Y Guangzhou International Trade Co., Ltd. is an auto parts supplier based in Guangzhou, China, specializing in components for Chinese New Energy Vehicles (NEVs). Our main focus is automotive lighting, including replacement headlights and tail lamps for major EV brands like BYD, MG, and... Who We AreV.K.Y Guangzhou International Trade Co., Ltd. is an auto parts supplier based in Guangzhou, China, specializing in components for Chinese New Energy Vehicles (NEVs). Our main focus is automotive lighting, including replacement headlights and tail lamps for major EV brands like BYD, MG, and...
Get in touch with us
Leave a Message, we will call you back quickly!