Product Specification
Your Tesla Model S from 2015 to 2021 is a blend of luxury, performance, and advanced technology. Among its safety - enhancing features, the parking sensor system stands out as a reliable companion in tight parking situations. The 1097480 - 00 - A Front Bumper Parking Sensor Bracket S3 plays a pivotal role in ensuring the proper functioning of this system. It's not just a bracket; it's the key to maintaining the accuracy and reliability of your Model S's parking sensors.
The parking sensors in your Model S are designed to detect obstacles with remarkable precision. However, this accuracy hinges on the sensors being correctly positioned. The 1097480 - 00 - A bracket is engineered to hold the front - bumper parking sensors in the exact location required for optimal performance. It ensures that the sensors can accurately measure the distance between your vehicle and any objects in front, whether you're parallel parking on a busy city street or pulling into a tight parking space in a crowded lot. Incorrect sensor placement, which can occur if the bracket is damaged or misaligned, can lead to false readings. You might receive a warning too late or not at all, increasing the risk of a collision and potential damage to your Model S.
The front bumper of your Model S is exposed to a variety of conditions. From the vibrations of daily driving to minor bumps and scrapes during parking maneuvers, the parking sensor bracket needs to be robust. Constructed from high - quality, impact - resistant plastic, the 1097480 - 00 - A bracket is built to last. It can withstand the occasional brush against a curb or a gentle tap from another vehicle without cracking or breaking. This durability not only protects the sensors but also ensures the long - term reliability of the parking assist system. In addition, the material used in the bracket is resistant to UV rays and weathering, so it won't degrade over time, even when exposed to the sun and rain.
Despite the design refinements Tesla made to the Model S between 2015 and 2021, the 1097480 - 00 - A bracket is compatible with all these model years. It attaches to the front bumper using the original factory - designed mounting points, ensuring a perfect fit without the need for any modifications. Whether your Model S has the classic, sleek design of the earlier models or the updated, more aerodynamic look of the later years, this bracket will integrate seamlessly. This compatibility is a testament to the meticulous engineering that went into designing a part that can adapt to the evolution of the Model S while maintaining its essential function.
If your parking sensors are giving inconsistent or inaccurate readings, a problem with the 1097480 - 00 - A bracket could be the root cause. For example, if the sensors seem to detect objects randomly or not at all, or if the distance readings are way off, it's likely that the bracket has been damaged or has shifted, causing the sensors to be misaligned. In some cases, you might notice that the sensors on one side of the front bumper are working fine while the others are not. This often indicates an issue with the bracket holding the malfunctioning sensors.
Inspecting the front bumper for visible damage to the bracket is a straightforward way to determine if it needs replacement. Look for cracks, breaks, or missing pieces on the 1097480 - 00 - A bracket. Even a small crack can compromise the integrity of the bracket and gradually lead to sensor misalignment. If the bracket appears to be loose or is hanging off the bumper, it won't be able to hold the sensors in the correct position, and a replacement is necessary. Additionally, if you notice any signs of wear or corrosion on the bracket, it's a sign that its performance may be compromised.
If you find that parking your Model S has become more challenging than usual, and you're relying less on the parking sensors and more on your own judgment, it could be due to a faulty bracket. A poorly functioning parking sensor system, caused by a damaged bracket, can give you a false sense of security or incorrect information about the distance to obstacles. This can make parking more stressful and increase the risk of accidents. If you've noticed that you're more cautious and less confident when parking, it's a good idea to check the condition of the parking sensor bracket.
Installing the 1097480 - 00 - A bracket requires a few basic tools. A small Phillips - head screwdriver is typically needed to remove and install the screws that hold the bracket in place. In some cases, you may also need a trim removal tool. This tool is useful for gently prying off any plastic covers or trim pieces that might be in the way of accessing the bracket. Having these tools on hand will make the installation process smoother and more efficient.
- Start by opening the front trunk (frunk) of your Model S. This provides better access to the back of the front bumper, where the parking sensor bracket is located.
- Locate the existing 1097480 - 00 - A bracket. It will be attached to the inside of the front bumper, with the parking sensor mounted on it.
- Using the Phillips - head screwdriver, carefully remove the screws that secure the old bracket. If there are any plastic clips or fasteners, use the trim removal tool to gently pry them off. Be careful not to damage the surrounding parts of the bumper during this process.
- Once the old bracket is removed, take the new 1097480 - 00 - A bracket and align it with the original mounting points on the inside of the front bumper. Ensure that the holes for the sensors are facing the correct direction.
- Secure the new bracket in place using the screws or clips that you removed from the old bracket. Tighten the screws firmly, but avoid overtightening, as this could strip the threads or damage the plastic bracket.
- Reinstall any trim pieces or covers that you removed earlier. Make sure they fit snugly and are properly aligned.
- Close the frunk and test the parking sensors to ensure they are working correctly. Drive your Model S slowly towards a known object in a safe area and observe the sensor readings to confirm their accuracy.
While the installation process can be done by DIY - enthusiasts, if you're not entirely confident in your mechanical skills, it's advisable to have a professional mechanic install the bracket. They have the experience and specialized tools to ensure that the installation is done correctly, minimizing the risk of damaging other components of the front bumper or the parking sensor system.
Your Tesla Model S was designed with safety and functionality at its core. The 1097480 - 00 - A Front Bumper Parking Sensor Bracket S3 is an integral part of maintaining the integrity of the parking sensor system, which is crucial for safe and stress - free parking. Whether you're replacing a damaged bracket or simply want to ensure the long - term reliability of your parking sensors, this bracket is the ideal choice.
Order yours today and restore the precision and reliability of your Model S's parking assist system.
Company Details
Bronze Gleitlager
,
Bronze Sleeve Bushings
and
Graphite Plugged Bushings
from Quality China Factory
-
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
-
-
Total Annual:
1200000-2000000
-
Employee Number:
80~130
-
Ecer Certification：
Verified Supplier
+ Read More
