AC85V 5 W Lithium Ion Battery Emergency Light 500Lm 6500k LED Bulkhead

Product Specification

AC85V 5 W Lithium Ion Battery Emergency Light 500Lm 6500k LED Bulkhead


Technical Specifications

What is the difference between them in an Emergency?
 

Non-maintained lights turn on only during a power failure. Maintained lights work continuously and continue to illuminate during a power failure, enabling them to function as both a standard light and an emergency light.

Why would you use maintained over non-maintained emergency lighting?
 

The lighting type depends on the area you are trying to protect or light - if the site requires a constant light because it is in a highly used part of the property or the room is not well lit. A maintained emergency light would be a better choice than a place of little traffic that is sufficiently lit. A non-maintained emergency light would be a good selection. The fitting can be in a non-illuminated state during regular operation and then turn the lighting on should there be a power failure.

Where should emergency lighting be installed?
 

When it comes to emergency lighting, there are a few things to keep in mind. First and foremost, emergency lighting should be installed in locations where it is likely to be needed most - such as near exits or in hallways leading to different parts of the building.

Emergency lights must be installed in all common areas, escape routes and exits of multi-unit residential buildings, and government and commercial buildings occupied by employees, customers, and the general public. Installation needs to light hazards along an evacuation route such as stairs, corners and uneven paths, and firefighting equipment such as extinguishers and fire blankets.

Some other common locations that require emergency lighting are rooms with no lighting, no windows, lifts, large function rooms, different floor levels, toilets and bathrooms. Another kind of LED (bulbs) luminaire that provides safety in other premises is called a spitfire luminaire. These LED luminaires are located along exit paths and fire safety paths.