Pego Electronics (Yi Chun) Company Limited
| Payment Terms | Western Union, MoneyGram, T/T |
| Supply Ability | 50 sets/month |
| Delivery Time | 7 working days |
| Packaging Details | woodencase |
| Standard compliant | IEC60335-2-15 clause 15.2 and figure 101 |
| Test solution | 30ML with 1% NACL |
| Application | for Testing the Connectors with Spillage Prtoection |
| Inclined angle | 20° |
| Brand Name | PEGO Group |
| Model Number | PG-SGA |
| Certification | Third-Lab Calibration Certificate |
| Place of Origin | China |
View Detail Information
Explore similar products
TMD3628-92 Tracking Index Tester Platinum Electrode Material For CTI And PTI
Withstand Voltage Electrical Safety Test Equipment 10KV Output 50Hz / 60Hz Wave
ZY-2 Needle Flame Test Apparatus Auto Controlled Apply To Ignition Hazard
IEC60598 Electrical Safety Test Equipment Black Rectangular Draught Proof
Product Specification
| Payment Terms | Western Union, MoneyGram, T/T | Supply Ability | 50 sets/month |
| Delivery Time | 7 working days | Packaging Details | woodencase |
| Standard compliant | IEC60335-2-15 clause 15.2 and figure 101 | Test solution | 30ML with 1% NACL |
| Application | for Testing the Connectors with Spillage Prtoection | Inclined angle | 20° |
| Brand Name | PEGO Group | Model Number | PG-SGA |
| Certification | Third-Lab Calibration Certificate | Place of Origin | China |
| High Light | Connectors Spillage Test Apparatus ，30ML Spillage Test Apparatus ，Spillage Prtoection Spillage Test Equipment | ||
IEC60335-2-15 30ML Spillage Test Apparatus for Testing the Connectors with Spillage Prtoection
1. Introduction:
The spillage test apparatus meets the requirements of IEC60335-2-15 clause 15.2 and figure 101. It’s used to check the connectors with spillage protection to ensure that the connectors are not affected by liquids when installed in a rated voltage base according to the manufacturer’s installation instructions.
the spillage test is carried out with the appliance deviating from the normal position of use by an angle not exceeding 5°. The kettles are placed on a plane inclined at an angle of 20° to the horizontal and 30ml of water containing approximately 1% NACL is poured onto the top rim in the most unfavourable place. The solution is poured steadily through a tube having an inner diameter of 8mm over a period of 2s, the lower end of the tube being 200mm above the appliance. A further quantity, equal to 15% of the rated capacity of the kettel, is then added as quickly as possible.
2. Parameters:
| Tube dimension | Inner diameter: Ø8mm, length 3mm |
| Distance between the lower end of the tube and specimen | 200mm |
| Water injection method | Double water injection pipes, one for tap water, and the other for salt water |
| Flow control | Manual control |
| Lifting method | Manual screw adjustment of the lifting table |
3. Drawings
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2014
Ecer Certification：
Verified Supplier
Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs... Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs...
Get in touch with us
Leave a Message, we will call you back quickly!