Changzhou Su Li drying equipment Co., Ltd.
| Payment Terms | T/T |
| Packaging Details | According to customer requirements |
| Model | PLG |
| How it works | Continuity |
| Material | sus304, carbon steel, 316l |
| Heat Source | Steam, thermal oil, hot water |
| Brand Name | suli |
| Model Number | PLG |
| Certification | ISO9001 |
| Place of Origin | china |
View Detail Information
Explore similar products
Rotary Wastewater Sludge Dryer Vertical Sludge Drying In Water Treatment
Highly Efficient Conduction Type Continuous Drying Equipment PLG Disc Continuous
Calcium Oxalate PLG Disc Dryer With PLC HMI Control System And Heat Transfer Oil
Conductive continuous drying equipment with high thermal efficiency and low
Product Specification
| Payment Terms | T/T | Packaging Details | According to customer requirements |
| Model | PLG | How it works | Continuity |
| Material | sus304, carbon steel, 316l | Heat Source | Steam, thermal oil, hot water |
| Brand Name | suli | Model Number | PLG |
| Certification | ISO9001 | Place of Origin | china |
| High Light | Feed Processing Steam Plate Continuous Dryer ，Chemical Food Steam Plate Continuous Dryer ，PLG Steam Plate Continuous Dryer | ||
How to adjust the drying efficiency of the disc dryer?
Working principle of disc dryer:
The disc dryer continuously adds wet materials from the feeder to the first layer of drying disc on the upper part of the dryer. The rake arm rotates to stir the materials continuously. The materials rotate in a spiral shape on the drying disc. Large materials fall into the drying disc of the next layer to continue drying. Through the continuous alternation of the upper and lower drying discs, the materials can continue to flow through the dryer. Under the drying of the heating medium, the materials can be fully dried and fall into the cooling disc on the bottom layer. They are sent out of the discharge port by the rake leaves, and the moisture is discharged from the top layer through the induced draft fan.
Adjustment method to improve the drying efficiency of disc dryer:
Adjust operating parameters: including product moisture content, spindle speed, feeder speed, steam pressure, temperature, flow rate, motor current, etc. By adjusting the feeding amount and the speed of the dryer main engine, the actual working conditions are close to the design requirements, thereby improving the drying efficiency.
Optimize drying medium: Select a suitable heating medium (such as saturated steam, hot water, thermal oil, etc.) and control its temperature and flow rate to ensure that the material is heated evenly and effectively.
Improve material distribution: Ensure uniform distribution of materials on the drying plate to avoid material accumulation or slippage, so as to maximize the contact area between the material and the drying medium.
Control drying time: According to the characteristics of the material and the drying requirements, reasonably set the drying time to avoid over-drying or under-drying.
Technical specification:
| Specification | Outer diameter mm | high mm | Dry area m² | power Kw |
| 1200/4 | Φ1850 | 2718 | 3.3 | 1 |
| 1200/6 | 3138 | 4.9 | ||
| 1200/8 | 3558 | 6.6 | 1.5 | |
| 1200/10 | 3978 | 8.2 | ||
| 1200/12 | 4398 | 9.9 | 2.2 | |
| 1500/6 | Φ2100 | 3022 | 8.0 | |
| 1500/8 | 3442 | 10.7 | ||
| 1500/10 | 3862 | 13.4 | ||
| 1500/12 | 4282 | 16.1 | 3.0 | |
| 1500/14 | 4702 | 18.8 | ||
| 1500/16 | 5122 | 21.5 | ||
| 2200/6 | Φ2900 | 3319 | 18.5 | |
| 2200/8 | 3739 | 24.6 | ||
| 2200/10 | 4159 | 30.8 | 4.0 | |
| 2200/12 | 4579 | 36.9 | ||
| 2200/14 | 4999 | 43.1 | 5.5 | |
| 2200/16 | 5419 | 19.3 | ||
| 2200/18 | 5839 | 55.4 | 7.5 | |
| 2200/20 | 6259 | 61.6 | ||
| 2200/22 | 6679 | 67.7 | 11 | |
| 2200/24 | 7099 | 73.9 | ||
| 2200/26 | 7519 | 80.0 |
| Specification | Outer diameter mm | high mm | Dry area m² | power Kw |
| 2500/6 | Φ3150 | 3319 | 26.3 | 4 |
| 2500/8 | 3739 | 35 | ||
| 2500/10 | 4159 | 43.8 | 5.5 | |
| 2500/12 | 4579 | 52.5 | ||
| 2500/14 | 4999 | 61.3 | 7.5 | |
| 2500/16 | 5419 | 70 | ||
| 2500/18 | 5839 | 78.8 | 11 | |
| 2500/20 | 6259 | 87.5 | ||
| 2500/22 | 6679 | 96.3 | ||
| 2500/24 | 7099 | 105 | 13 | |
| 2500/26 | 7519 | 113.8 | ||
| 3000/8 | Φ3800 | 4050 | 48 | 11 |
| 3000/10 | 4650 | 60 | ||
| 3000/12 | 5250 | 72 | ||
| 3000/14 | 5850 | 84 | ||
| 3000/16 | 6450 | 96 | ||
| 3000/18 | 7050 | 108 | 13 | |
| 3000/20 | 7650 | 120 | ||
| 3000/22 | 8250 | 132 | ||
| 3000/24 | 8850 | 144 | ||
| 3000/26 | 9450 | 156 | 15 | |
| 3000/28 | 10050 | 168 |
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2004
Employee Number:
150~300
Ecer Certification：
Active Member
Changzhou Suli Drying Equipment Co., Ltd. is a modern enterprise specializing in drying, drug machines, chemical equipment design and manufacturing specialized in drying, coal -fired hot air furnaces, etc., and is committed to designing and manufacturing production lines. The company is located at S... Changzhou Suli Drying Equipment Co., Ltd. is a modern enterprise specializing in drying, drug machines, chemical equipment design and manufacturing specialized in drying, coal -fired hot air furnaces, etc., and is committed to designing and manufacturing production lines. The company is located at S...
Get in touch with us
Leave a Message, we will call you back quickly!