Low Dose 30KHZ Dental X Ray Machine Tripod Optional

Product Specification

LK-C25 30KHZ Covenient Low Dose Dental X-ray Unit Tripod Optional

Operation of the Main Unit

1. Check the aspect if there is marks of falling or rowing after opening the box.

2. Make sure the fittings with the encasement list in the box.

3. Connect the six-core cable(of the Main Unit) to the joint of the ball head and tighten the screw; Install the blue ray tube to the foreside of the ball head then tighten it.

4. After the Main Unit and ball head are perfectly fit together, plug in the international standard electrical source, earthing strongly required.

5. Turn on the Power then the pilot lamp will indicte by lighting, as while as the digital tube of the main unit will show the fore setting time. Now the equipment is standby mode.

6. Use “SET” “+” “-” to reset the time,as flows: press SET, the pilot lamp above is bright, now it is the time setting modeà then press“+” “-” to set the time needed(time range 1-9seconds); press set again when the time is adjusted the light lamp is off. The equipment is standby mode. (Skip to next step if unneeded)

7. Put the Tooth film plumb behind the tooth which is going to be taken picture, and be as close as possible(the smooth side stick to the tooth)

8. Keep the ball head plumb to the tooth projection position; Have the ball head, tooth, and tooth film steadily mutually plumb.

9. After positioning, choose the ON/OFF on the main Unit or remote controller or the button on the touch head tube to take pictures, all these three ways have the same effection. (Notice: gently press 0.5sec to turn it on)

10. After exposure to the tube, press the start button again (available in three ways) could be the work of the emergency to stop shooting and return to standby status. (At this point no output ray, dental films can be used again).

11. repeat step 6 to reset the picturing time, repeating picturing please repeat step 7 to 9.

12. Turn the power of the main unit off when work is finished, press POWER then the pilot lamp is off. Don’t keep the main unit long in standby mode.

1. How can I place an order?

You can contact any of our sales person for an order. Please provide the details of

your requirements as clear as possible. So we can send you the offer at the first time.

For designing or further discussion, it is better to contact us with Skype, TradeManger or QQ or WhatsApp or other instant ways, in case of any delays.

2. When can I get the price?

Usually we quote within 24 hours after we get your inquiry.

3. Can you do the design for us?

Yes. We have a professional team having rich experience in gift box design and manufacturing.

Just tell us your ideas and we will help to carry out your ideas into perfect boxes.

4. How long can I expect to get the sample?

After you pay the sample charge and send us confirmed files, the samples will be ready

for delivery in 1-3 days. The samples will be sent to you via express and arrive in 3-5 days.

5. What about the lead time for mass production?

Honestly, it depends on the order quantity and the season you place the order.

Always 25-28days based on general order .

6. What is your terms of delivery?

We accept EXW, FOB, CFR, CIF, etc. You can choose the one which is the most convenient

or cost effective for you.

7. What is the payment way?

1)TT or Wester Union for the trial order

2) ODM, OEM order, 30% for deposit,70% against the copy B/L.