Ningbo Suntech Power Machinery Tools Co.,Ltd.
| Payment Terms | L/C, T/T |
| Supply Ability | 900000 Metric Ton/Metric Tons Per Year |
| Delivery Time | 30-35 days after deposit |
| Packaging Details | Exported Containers |
| Material Type | Steel Q355/Q255 |
| Application | Transmission Line Tower |
| Surface | Hot Dip Galvanised |
| Wind Speed | 120 Km/H |
| Usage | Construction Site |
| Lifetime | More than 30 years |
| Brand Name | Suntech |
| Model Number | Lattice Tower |
| Certification | ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
200KN Cable Drum Stand
70Kg Wire Reel Stands
Cross River Angel Steel 35 66 110 220KV Transmission Line Tower
Tubular Hot Dip Galvanized 330kv Angel Steel Lattice Tower
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 900000 Metric Ton/Metric Tons Per Year |
| Delivery Time | 30-35 days after deposit | Packaging Details | Exported Containers |
| Material Type | Steel Q355/Q255 | Application | Transmission Line Tower |
| Surface | Hot Dip Galvanised | Wind Speed | 120 Km/H |
| Usage | Construction Site | Lifetime | More than 30 years |
| Brand Name | Suntech | Model Number | Lattice Tower |
| Certification | ISO | Place of Origin | China |
| High Light | 132KV Lattice Steel Tower ，HDG Lattice Steel Tower ，132KV Power Transmission Line Towers | ||
132KV Transmission Line Lattice Steel Tower Erection Construction Power Site
Transmission lines tower are either monopolar or bipolar systems. With bipolar systems, a conductor arrangement with one conductor on each side of the tower is used. On some schemes, the ground conductor is used as electrode line or ground return. In this case, it had to be installed with insulators equipped with surge arrestors on the pylons in order to prevent electrochemical corrosion of the pylons. For single-pole Suntech transmission with ground return, towers with only one conductor can be used. In many cases, however, the towers are designed for later conversion to a two-pole system. In these cases, often conductors on both sides of the tower are installed for mechanical reasons. Until the second pole is needed, it is either used as electrode line or joined in parallel with the pole in use. In the latter case, the line from the converter station to the earthing (grounding) electrode is built as underground cable, as overhead line on a separate right of way or by using the ground conductors.
Electrode line towers are used in some Suntech schemes to carry the power line from the converter station to the grounding electrode. They are similar to structures used for lines with voltages of 10–100 kV, but normally carry only one or two conductors.
Towers may be self-supporting and capable of resisting all forces due to conductor loads, unbalanced conductors, wind and ice in any direction. Such towers often have approximately square bases and usually four points of contact with the ground.
A semi-flexible tower is designed so that it can use overhead grounding wires to transfer mechanical load to adjacent structures, if a phase conductor breaks and the structure is subject to unbalanced loads. This type is useful at extra-high voltages, where phase conductors are bundled (two or more wires per phase). It is unlikely for all of them to break at once, barring a catastrophic crash or storm.
A guyed mast has a very small footprint and relies on guy wires in tension to support the structure and any unbalanced tension load from the conductors. A guyed tower can be made in a V shape, which saves weight and cost.
| Product | Steel Structure Tower |
| Height | 5m to 100m or other height customer requirement |
| Suit for | Electric Power Distribution Transmission Steel Tower |
| Shape | Conoid ,Multi-pyramidal,Columniform,polygonal or conical |
| Material | Usually Q345B/A572,minimum yield strength>=345n/mm2 |
| Q235B/A36,minimum yield strength>=235n/mm2 | |
| As well as Hot rolled coil from Q460, ASTM573 GR65, GR50, SS400, SS490, to ST52 | |
| Strength | 2.5KN,5KN,8KN,10KN,12KN |
| Torlance of the dimenstion | -0.02 |
| Optical assembly of lighting fixture | IP 65 |
| Electroshock resistant protective grade | Grade I |
| The casing anti-corrosion performance | Class II |
| Working atmosphere of lighting fixture | -40 ºC~+45 ºC |
| Surface treatment | Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required |
| Joint of Poles | Insert mode, inner flange mode, face to face joint mode |
| Design of pole | Against earthquake of 8 grade |
| Wind Speed | 160km/hour |
| Minimum yield strength | 335mpa |
| Minimum ultimate tensile strength | 400mpa |
| Max ultimate tensile strength | 620mpa |
| Standard | ISO9001 |
| Length of per section | Within 14m once forming without slip joint |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller,Other
Year Established:
1995
Total Annual:
>300 Million
Employee Number:
>158
Ecer Certification：
Verified Supplier
Suntech Power Group is one of the largest Procurement, Engineering & Contracting Group companies in China.Our group branch company and factory have already engaged in the field of electric power more than 26 years. 1.Steel structure industry especially steel towers and related pr... Suntech Power Group is one of the largest Procurement, Engineering & Contracting Group companies in China.Our group branch company and factory have already engaged in the field of electric power more than 26 years. 1.Steel structure industry especially steel towers and related pr...
Get in touch with us
Leave a Message, we will call you back quickly!