Anterwell Technology Ltd.
| Payment Terms | T/T, Western Union,PayPal |
| Supply Ability | 5200PCS |
| Delivery Time | 1 Day |
| Packaging Details | please contact me for details |
| VCC to GND | −0.3 V to +6 V |
| Digital Input/Output Voltage (DE, RE, DI) | −0.3 V to +6 V |
| Receiver Output Voltage (RO) | −0.3 V to (VCC + 0.3 V) |
| Driver Output (A, B, Y, Z)/Receiver Input (A, B) Voltage | −8 V to +13 V |
| Driver Output Current | ±250 mA |
| Brand Name | AD |
| Model Number | ADM3072EARZ |
| Certification | Original Factory Pack |
| Place of Origin | Original |
View Detail Information
Explore similar products
M27C801-100F1 Programmable IC Chips 8 Mbit 1Mb x 8 UV EPROM and OTP EPROM
145 MHz Fast FET Op Amps optical integrated circuits AD8065WARTZ High Performanc
X24C44SI Serial Nonvolatile Static RAM 16x16 Organization Single 5 Volt Supply
AD9850BRSZ TQFP-64 programmable circuit board , Flash ic integrated circuit CMOS
Product Specification
| Payment Terms | T/T, Western Union,PayPal | Supply Ability | 5200PCS |
| Delivery Time | 1 Day | Packaging Details | please contact me for details |
| VCC to GND | −0.3 V to +6 V | Digital Input/Output Voltage (DE, RE, DI) | −0.3 V to +6 V |
| Receiver Output Voltage (RO) | −0.3 V to (VCC + 0.3 V) | Driver Output (A, B, Y, Z)/Receiver Input (A, B) Voltage | −8 V to +13 V |
| Driver Output Current | ±250 mA | Brand Name | AD |
| Model Number | ADM3072EARZ | Certification | Original Factory Pack |
| Place of Origin | Original | ||
| High Light | programming ic chips ，ic programmer circuit | ||
3.3 V, ±15 kV ESD-Protected, Half- and Full-Duplex, RS-485/RS-422 Transceivers
GENERAL DESCRIPTION
The ADM3070E to ADM3078E are 3.3 V, low power data transceivers with ±15 kV ESD protection suitable for full- and half-duplex communication on multipoint bus transmission lines. They are designed for balanced data transmission, and they comply with TIA/EIA standards RS-485 and RS-422.
The devices have an ⅛ unit load receiver input impedance, which allows up to 256 transceivers on a bus. Because only one driver should be enabled at any time, the output of a disabled or powered-down driver is tristated to avoid overloading the bus.
The receiver inputs have a true fail-safe feature, which eliminates the need for external bias resistors and ensures a logic high output level when the inputs are open or shorted. This guarantees that the receiver outputs are in a known state before communication begins and when communication ceases.
Notice
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
ABSOLUTE MAXIMUM RATINGS
| Parameter | Rating |
| VCC to GND | −0.3 V to +6 V |
| Digital Input/Output Voltage (DE, RE, DI) | −0.3 V to +6 V |
| Receiver Output Voltage (RO | −0.3 V to (VCC + 0.3 V) |
| Driver Output (A, B, Y, Z)/Receiver Input (A, B) Voltage | −8 V to +13 V |
| Driver Output Current | ±250 mA |
Company Details
Business Type:
Distributor/Wholesaler,Trading Company
Year Established:
2004
Total Annual:
500000-1000000
Employee Number:
20~30
Ecer Certification：
Site Member
King--- Originator of ANTERWELL, engaged in the IC electronics industry in 1998 and establish ANTERWELL in 2004. The company is located in Shenzhen Huaqiang North, the largest electronic center in Asia. Our main business is the technical development and ... King--- Originator of ANTERWELL, engaged in the IC electronics industry in 1998 and establish ANTERWELL in 2004. The company is located in Shenzhen Huaqiang North, the largest electronic center in Asia. Our main business is the technical development and ...
Get in touch with us
Leave a Message, we will call you back quickly!