Anterwell Technology Ltd.
| Payment Terms | T/T, Western Union, Paypal |
| Supply Ability | 5200pcs |
| Delivery Time | 1 day |
| Packaging Details | Please contact me for details |
| Ambient Operating Temperature | –40 to 125 °C |
| Temperature Under Bias | –50 to 125 °C |
| Storage Temperature | –65 to 150 °C |
| Input or Output Voltage | –2 to 7 V |
| Supply Voltage | –2 to 7 V |
| Program Supply Voltage | –2 to 14 V |
| Brand Name | Anterwell |
| Model Number | M27C512-10F1 |
| Certification | new & original |
| Place of Origin | original factory |
View Detail Information
Explore similar products
M27C801-100F1 Programmable IC Chips 8 Mbit 1Mb x 8 UV EPROM and OTP EPROM
145 MHz Fast FET Op Amps optical integrated circuits AD8065WARTZ High Performanc
X24C44SI Serial Nonvolatile Static RAM 16x16 Organization Single 5 Volt Supply
AD9850BRSZ TQFP-64 programmable circuit board , Flash ic integrated circuit CMOS
Product Specification
| Payment Terms | T/T, Western Union, Paypal | Supply Ability | 5200pcs |
| Delivery Time | 1 day | Packaging Details | Please contact me for details |
| Ambient Operating Temperature | –40 to 125 °C | Temperature Under Bias | –50 to 125 °C |
| Storage Temperature | –65 to 150 °C | Input or Output Voltage | –2 to 7 V |
| Supply Voltage | –2 to 7 V | Program Supply Voltage | –2 to 14 V |
| Brand Name | Anterwell | Model Number | M27C512-10F1 |
| Certification | new & original | Place of Origin | original factory |
| High Light | programming ic chips ，programmable audio chip | ||
M27C512
512 Kbit (64K x8) UV EPROM and OTP EPROM
FEATURES SUMMARY
■ 5V ± 10% SUPPLY VOLTAGE in READ OPERATION
■ ACCESS TIME: 45ns
■ LOW POWER “CMOS” CONSUMPTION:
– Active Current 30mA
– Standby Current 100µA
■ PROGRAMMING VOLTAGE: 12.75V ± 0.25V
■ PROGRAMMING TIMES of AROUND 6sec.
■ ELECTRONIC SIGNATURE
– Manufacturer Code: 20h
– Device Code: 3Dh
■ PACKAGES
– Lead-Free Versions
SUMMARY DESCRIPTION
The M27C512 is a 512 Kbit EPROM offered in the two ranges UV (ultra violet erase) and OTP (one time programmable). It is ideally suited for applications where fast turn-around and pattern experimentation are important requirements and is organized as 65536 by 8 bits.
The FDIP28W (window ceramic frit-seal package) has transparent lid which allows the user to expose the chip to ultraviolet light to erase the bit pattern. A new pattern can then be written to the device by following the programming procedure. For applications where the content is programmed only one time and erasure is not required, the M27C512 is offered in PDIP28, PLCC32 and TSOP28 (8 x 13.4 mm) packages.
In addition to the standard versions, the packages are also available in Lead-free versions, in compliance with JEDEC Std J-STD-020B, the ST ECOPACK 7191395 Specification, and the RoHS (Restriction of Hazardous Substances) directive.
Absolute Maximum Ratings
| Symbol | Parameter | Value | Unit |
| TA | Ambient Operating Temperature (3) | –40 to 125 | °C |
| TBIAS | Temperature Under Bias | –50 to 125 | °C |
| TSTG | Storage Temperature | –65 to 150 | °C |
| TLEAD | Lead Temperature during Soldering | (note 1) | °C |
| VIO (2) | Input or Output Voltage (except A9) | –2 to 7 | V |
| VCC | Supply Voltage | –2 to 7 | V |
| VA9 (2) | A9 Voltage | –2 to 13.5 | V |
| VPP | Program Supply Voltage | –2 to 14 | V |
Note:
1. Compliant with the JEDEC Std J-STD-020B (for small body, Sn-Pb or Pb assermbly), the ST ECOPACK® 7191395 specification, and the European directive on Restrictions on Hazardous Substances (RoHS) 2002/95/EU.
2. Minimum DC voltage on Input or Output is –0.5V with possible undershoot to –2.0V for a period less than 20ns. Maximum DC voltage on Output is VCC +0.5V with possible overshoot to VCC +2V for a period less than 20ns.
3. Depends on range.
Figure 1. Packages Figure 2. Logic Diagram
Signal Names
| A0-A15 | Address Inputs |
| Q0-Q7 | Data Outputs |
| E | Chip Enable |
| GVPP | Output Enable / Program Supply |
| VCC | Supply Voltage |
| VSS | Ground |
| NC | Not Connected Internally |
| DU | Don’t Use |
Figure 3. DIP Connections Figure 4. LCC Connections
Figure 5. TSOP Connections
Company Details
Business Type:
Distributor/Wholesaler,Trading Company
Year Established:
2004
Total Annual:
500000-1000000
Employee Number:
20~30
Ecer Certification：
Site Member
King--- Originator of ANTERWELL, engaged in the IC electronics industry in 1998 and establish ANTERWELL in 2004. The company is located in Shenzhen Huaqiang North, the largest electronic center in Asia. Our main business is the technical development and ... King--- Originator of ANTERWELL, engaged in the IC electronics industry in 1998 and establish ANTERWELL in 2004. The company is located in Shenzhen Huaqiang North, the largest electronic center in Asia. Our main business is the technical development and ...
Get in touch with us
Leave a Message, we will call you back quickly!