KingPo Technology Development Limited
| Payment Terms | T/T |
| Packaging Details | safety carton pack or plywood box |
| Delivery Time | 30 working days |
| Supply Ability | 3 sets per month |
| needle-shaped burner | higher than 35mm |
| stainless steel pinhead | Φ0.9mm-Φ0.5mm |
| burner angle | 0°、45°adjustable |
| flame height | 12mm ± 1mm |
| ignition gas | butane or propane with more than 95% purity |
| test temperature | 0~1000℃ |
| Brand Name | kingpo |
| Certification | iso9001 ce |
| Place of Origin | china |
| Model Number | KP-FT03 |
View Detail Information
Explore similar products
50w and 500w Flame Tester | IEC60695-11-3,IEC60695-11-4
Platinum Electrode For IEC 60112 CTI Tester Platinum Length ≥12mm
Copper Block With Omega K - TypeThermocouple IEC 60695-11-5 Fig A.1 Standard
220V 50-60Hz Thermocouple Welding Machine , Thermocouple Welder Equipment
Product Specification
| Payment Terms | T/T | Packaging Details | safety carton pack or plywood box |
| Delivery Time | 30 working days | Supply Ability | 3 sets per month |
| needle-shaped burner | higher than 35mm | stainless steel pinhead | Φ0.9mm-Φ0.5mm |
| burner angle | 0°、45°adjustable | flame height | 12mm ± 1mm |
| ignition gas | butane or propane with more than 95% purity | test temperature | 0~1000℃ |
| Brand Name | kingpo | Certification | iso9001 ce |
| Place of Origin | china | Model Number | KP-FT03 |
| High Light | Needle Flame Test Apparatus ，Flammability Test Chamber | ||
Brief Introduction
Needle Flame Tester is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695 -11-5,GB/T5169.5-2008,GB4706.1-2005 ,etc.
Needle Flame Tester uses Needle-shaped burner in required size (Φ0.9mm ) ;transport butane gas into it ,ignite the specimen at a regular time and angle of 45° ,to check whether the specimen ignite ,lasting ignition time and combustion length to test the ignition fatalness of devices inside because of flammule caused by breakdown.
Needle Flame Tester is suitable for research,production and quality testing department of electrical devices and component parts like lighting equipment,low voltage apparatus,household appliance,machine tool electric appliance,motor-driven machine,electric tool,electronic instrument,electrical connectors and accessories;also suitable for insulating material,engineering plastic and other solid combustible material industry.
Characteristics:
With predetermined size (Φ 0.9 mm) needle burner, in 45°angle burning product,measure the fire risk by product light-off or hold burning time.
Technical parameters:
| Needle burner | inner hole diameter Φ 0.5mm ± 0.1mm, Diameter,9mm≤Φ, length ≥ 35mm, stainless steel |
| Burner angle | 0,° 45° (adjust flame height) |
| Thermocouple | Ø0.5mm Type K (Ni/Cr - Ni/Al), armored sheath can withstand temperature-40°C~ 1100°C |
| Burning time | 0-999.9 s ± 0.1 s adjustable (usually selected for 30s) |
| Hold Burning time | 0-999.9 s ± 0.1 s, automatic recording, manual timeout |
| Flame Height | 12mm ± 1mm (with height measurement instruments) |
| Flame Gas | Butane gas, min. 95% purity |
| Temperature Test Range | 0~1000°C |
| Flame Temperature Requirements | from 100 °C ± 2 °C liters to 700 °C ± 3 °C time in 23.5 seconds ± 1 seconds |
| Standard Copper Block | 4mm±0.01mm, weight.0.58g±0.01g before drilling. Cu-ETP |
| Test process | automatic control, independent convulsions |
| Chamber | ≥0.5m3 |
| Size | W1100mm×D700mm×H1300mm, exhaust hole Ø100mm |
| Control | Using single chip microcomputer + touch screen control |
| Consult standard | IEC60695 -11-5,UL746A |
| Power Supply | 300VA ,220V, 48-60Hz |
| Display panel language | Chinese + English (adjustable |
3
.Test procedure
Installation
* This tester should be placed on a level table
* Table size no less than 1400W * 900D * (600-800)H mm
* Distance to the wall: > 200mm
* Exhaust pipe: diameter of 100mm
* The test room should be independent room equipped with exhaust system and firefighting device
* Please prepare gas (butane or purity >95% propane) and gas regulator
1.1) installs exhaust pipe, tighten the fitting
1.2) connect wire control box as below
1.2) connect wire control box as below
1.3) connect gas
Attention
Company Details
Business Type:
Manufacturer,Trading Company,Exporter,Seller
Year Established:
2000
Total Annual:
8000000-1500000
Employee Number:
50~200
Ecer Certification：
Verified Supplier
.gtr-container { font-family: 'Arial', sans-serif; color: #333; line-height: 1.6; max-width: 1000px; margin: 0 auto; padding: 20px; } .gtr-heading { font-size: 18px !important; font-weight: 600; color: #2a5885; margin: 25px 0 15px 0; padding-bottom: 8px; border-bottom: 2px ... .gtr-container { font-family: 'Arial', sans-serif; color: #333; line-height: 1.6; max-width: 1000px; margin: 0 auto; padding: 20px; } .gtr-heading { font-size: 18px !important; font-weight: 600; color: #2a5885; margin: 25px 0 15px 0; padding-bottom: 8px; border-bottom: 2px ...
Get in touch with us
Leave a Message, we will call you back quickly!