MOORE AUTOMATION LIMITED
| Payment Terms | T/T |
| Supply Ability | 10 pieces a day |
| Delivery Time | today |
| Packaging Details | new and original with factory sealed |
| Manufacture Year | 2016 |
| Control System | ABB Module System |
| Application | Nuclear Power Plant |
| lead time | in stock |
| description | INIIT13 ABB INIIT-13 ABB INIIT 13 Network Process Module NEW |
| Weight | 4lbs |
| Brand Name | ABB Module |
| Model Number | INIIT13 |
| Certification | CO.CQ |
| Place of Origin | Sweden |
View Detail Information
Explore similar products
ABB Module 3ASU21C110 LU6278 DCU30/7 ABB 3ASU21C110 DESK CONTROL UNIT Performanc
ABB CI855K01 3BSE018106R1 MB 300 Dual Ethernet Port Interface Kit
*Complete in specifications* ABB KSML92S1450-W-MC1 IEC60945 Industrial keyboard
ABB Module 07NG63R1 GJV3074313R1 Textile Printing Machinery Power Supply
Product Specification
| Payment Terms | T/T | Supply Ability | 10 pieces a day |
| Delivery Time | today | Packaging Details | new and original with factory sealed |
| Manufacture Year | 2016 | Control System | ABB Module System |
| Application | Nuclear Power Plant | lead time | in stock |
| description | INIIT13 ABB INIIT-13 ABB INIIT 13 Network Process Module NEW | Weight | 4lbs |
| Brand Name | ABB Module | Model Number | INIIT13 |
| Certification | CO.CQ | Place of Origin | Sweden |
| High Light | advant ocs ， advant controller 31 | ||
ABB Module INIIT13 ABB INIIT-13 ABB INIIT 13 Network Process Module NEW in sealed box
Product Description:
In some operating modes, the counter can count downwards,too. If this is wanted, the input U/D (Up/Down)of the function block must be configured to 1. When doing so, the counter starts counting at the start value (set value) down to the end value to 32768 or from 7FFFH to 8000H. After reaching 32768, the counter jumps with the next pulse to 32767. When the counter reaches the end value END,which was set in the function block, the value CF1 is stored in the function block. Only when the counter isset again (SET), CF is reset to 0.There are operating modes, where two counters can
work independently of each other. Only in this case,the function block is used twice in the program. The
first function block is assigned with 0 at input NO(Counter number) and the second function block is
assigned with 1 at NO. In other operating modes, NO is assigned with 0.
Related Product Recommendation:
| ICSI16D1-230 | BSE003528R1 | 3BSE006085R1 |
| ICSI08D1-24 ICSI08D1 | 3BSE003529R1 | 3BSE003827R1 |
| ICSI16D1 24 | 3BSE004693R1 | 3BSE003829R1 |
| ICSI08E1-120 | 3BHT100018R1 | 3BSE001077R1 |
| ICSI08E1-230 | 3BSE003097R1 | 3BUC98002R0001 |
| ICSI16E1 -120 | 3BSE006802R1 | 3BSE001440R1 |
| ICSI08E1-24 | 3BHT100010R1 | 3BHT300003R1 |
| ICSI16E1 -24 | 3BSE010997R1 | 3BSE000756R1 |
| ICSI08E4-230 | 3BHT100010R1 | 3BSE011000R1 |
| ICSC08L1-24 | 3BUC910018R1 | 3BSE011002R1 |
| ICSC08L1-120 | 3BSE003390R1 | 3BHT300017R1 |
| ICSC08L1-230 | 3BSE003389R1 | 3BSE020520R1 |
| FPR3345601R1012 | 3BHT300019R1 | 3BSE013202A1 |
| FPR3350601R1062 | 3BSC760004R1 | 3BUR980009R1 |
| FPR3313101R1052 | 3BSC760009R1 | 3BSE000435R1 |
| HESG446433R1 | 3BSE003832R1 | 3BSE004773R1 |
| HESG446867R2 | 3BSE003816R1 | 3BSE055760R1 |
| HESG332140R1 | 3BSE006096R1 | 3BHT300012R1 |
| HESG332112R1 | 3BSE001552R1 | 3BHT00006R1 |
| HESG332121R1 | 3BSC610037R1 | 3BHT300007R1 |
| HESG332140R1 | 3BSE000863R0001 | 57120001-PS |
| HESG332140R1 | 3BUR000698R1 | 57120001-DP |
| HESG332140R1 | 3BUR000699R1 | 57120001-P |
| HESG332140R1 | 3BSC550038R3 | 5712001-HA |
| HESG332112R1 70AS06a-E | 3BSE009616R1 3BSC | 3BSE007949R1 |
| ICSO08R1-24 | 492898801 | 57120001-HZ |
| ICSI08D1-120 ICSI08D1 | TK520V030 | 3BSE014162R1 |
Product's Character:
The following two terminals are reserved for the counter and cannot be used for other purposes:
Terminal 2 (E62,00): Counting input Terminal 46 (A62,00): Output ”End value reached”
Enabling of the counting input and of the output ”End value reached” is performed via the function block with EN=1 Access within the PLC program is possible with CEs, see the documentation of the programming software,the CEs are FCWR, FCRD, FCDEL.The following three terminals are reserved for the counter and cannot be used for other purposes:Terminal 2 (E62,00): Counting input Terminal 3 (E62,01): Enable input Terminal 46 (A62,00): Output ”End value reached”The enable input enables the counting input as well as the output ”End value reached”.The counter is only enabled if the enabling input
E 62,01 1 and at the function block the input 1.
LOT 2 NEW CUTLER HAMMER H1237 HEATER OVERLOAD ELEMENT D385152
LOT 5 NEW DSO FLUID HANDLING CD0-078-000 PUMP DIAPHRAGM BUNA-N 4IN D390320
NEW LOT 2 MOLEX WMF-3901PRT MINI-FIT JR CONNECTOR 2 CIRCUIT PANEL MOUNT B477722
LOT 5 NEW IDEAL 44-103 WIRE MARKER BOOKLET D513746
LOT 74 NEW SPIROLOX RS-125 RETAINING RING 34X30X1MM D312140
LOT 12 NEW NA A2-70 FS 5/8IN THICKNESS 1-1/2IN INDUSTRIAL SCREW B236393
LOT 20 NEW SOLUS VALU GUIDE VG-292 4X2X3/4IN SPACER USED W/ VG-203/220 B377543
LOT 4 NEW HAF EQUIPMENT H-M10725 ALUMINUM BAG CUP D268691
LOT 10 NEW SCHMERSAL 0250-01-100 RUBBER SEAL 25X33X8MM D319416
LOT 2 NEW GATES ASSORTED B67 B69 BELT HI-POWER II D286657
LOT 80 NEW PANDUIT ASSORTED PN10-6F-L PV14-P47-C TERMINAL CONNECTOR D339566
LOT 3 NEW HAMBA D25M-DB9F ELECTRICAL WIRE ASSEMBLY D330206
NEW TWIN CITY 2-7/16 BAF 245 1450RPM 115V-AC 9W 9-3/4IN OD FAN ASSEMBLY D475612
NEW CATERPILLAR CAT 1A-1415 2-3/4X1-7/8-THR?EAD LOCKNUT ENGINE MACHINE B495204
NEW H&H MACHINE 414743 BRAKE CORE SHAFT ASSEMBLY D411352
NEW A325 BH 1-1/4-7 X6-1/4IN HEX CAP SCREW 7IN TOTAL LENGTH BOLT D412829
NEW WEILER 08274 ST-3 3IN X 0.020IN X 1/2-3/8IN WIRE WHEEL D481244
LOT 5 NEW INTRALOX E1B8 CAM ROLLER D417186
The use of the product:
1.Experienced technichal support team.
2.365 days warranty for all the goods from us.
3.2000+ suppliers with us, we could help you to get any components which is difficult to get.
1.We keep more than 10 thousands Transistors in warehouse, it could cut lead time of most items.
2.365 days warranty for all the goods from us.
3.2000+ suppliers with us, we could help you to get any components which is difficult to get.
1. Q: Do you provide warranty for the goods?
A: Yes, we provide warranty for all the goods from us.
2. Q: Could Moore provide technology support?
A: We're in this field more than 12 years. If there's any problem, please contact with us,we'll provide suggestion from our engineer to help you solve problem.
3. Q: Does Moore keeps goods in stock or only trading?
A: We have large warehouse for goods. Keep lots of goods in warehouse, so could promise fast delivery.
Send your Inquiry details in the Below, Click "Send" Now!
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
Company Details
Business Type:
Agent,Trading Company
Year Established:
2011
Total Annual:
<200000000
Employee Number:
80~100
Ecer Certification：
Verified Supplier
Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial mod... Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial mod...
Get in touch with us
Leave a Message, we will call you back quickly!