Shenzhen Fire Power Control Technology Co., LTD
| Payment Terms | T/T,L/C |
| Supply Ability | 500/month |
| Packaging Details | sponge/box |
| Product name | Inertial Measurement Unit |
| gyro measuring range | ±500º/s |
| gyro zero bias stability | 0.3 deg/h |
| angular random walk | 0.06deg /√h |
| accelerometer range | 16g |
| acc bias stability | 0.02mg |
| Scale factor | 0.02%FS |
| Bandwidth | 200Hz |
| output | RS422 |
| Brand Name | AVIC |
| Model Number | IMU300C |
| Certification | CE ROHS |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
ADIS16488 Replacement Imu Mems Sensor Optional Version
Stim300 IMU Accelerometer Gyro Sensor Factory Supply
Lightweight 6-axis Inertial Measurement Unit Accelerometer Gyroscope Sensor
Temperature Compensated IMU Accelerometer Gyro 16488-C 3 axis
Product Specification
| Payment Terms | T/T,L/C | Supply Ability | 500/month |
| Packaging Details | sponge/box | Product name | Inertial Measurement Unit |
| gyro measuring range | ±500º/s | gyro zero bias stability | 0.3 deg/h |
| angular random walk | 0.06deg /√h | accelerometer range | 16g |
| acc bias stability | 0.02mg | Scale factor | 0.02%FS |
| Bandwidth | 200Hz | output | RS422 |
| Brand Name | AVIC | Model Number | IMU300C |
| Certification | CE ROHS | Place of Origin | CHINA |
| High Light | RS422 IMU sensor with gyro ，IMU accelerometer 16g range ，500º/s gyro sensor RS422 | ||
RS422 Output IMU Six Output Inertial Sensor Analog Of STIM300
The electrical connector of IMU300C-A0-IMU product is J30J-15 TJL, and the specific contact definition and allocation are shown in the following table:
| Stitch number | Name | Type | Remark |
| 1 | TxD- | Output | RS422 |
| 2 | RxD- | Input | RS422 |
| 3 | TST_1 | Output | |
| 4 | TOV_1 | Output | |
| 5 | RST | Input | |
| 6 | GND | Input | |
| 7 | Spare | ||
| 8 | VCC_5V | Power source | +5v |
| 9 | TxD+ | Output | RS422 |
| 10 | RxD+ | Input | RS422 |
| 11 | ExtTrig | Input | Synchronous input 5V |
| 12 | GND | Input | |
| 13 | GND | Input | |
| 14 | Spare | ||
| 15 | GND | Power ground |
| Parameter | Test conditions | Design accuracy | Unit | |
|---|---|---|---|---|
| Gyro | Dynamic measuring range | - | ±500 | º/s |
| Bias stability | Allan variance (500 °/s range, normal temperature) | 0.3 | º/h | |
| 10 s average (-40 ℃ ~ + 80 ℃, constant temperature), | 3.0 | º/h | ||
| Bias | Zero-bias range | 0.1 | º/s | |
| Zero-bias variation over full temperature range | 0.01 | º/s | ||
| Start repeatability | 0.005 | º/s | ||
| Effect of linear acceleration on bias | 0.002 | º/s/g | ||
| Influence of vibration on Bias, change before and after vibration | 0.002 | º/s/g | ||
| Influence of vibration on Bias, change before and during vibration | 0.001 | º/s/g | ||
| Scale factor | Scale factor accuracy | 0.1 | % | |
| Scale factor nonlinearity | 0.01 | %FS | ||
| Angular random walk | - | 0.06 | °/√hr | |
| Bandwidth | - | 200 | Hz | |
| Accelerometer | Dynamic measuring range | - | 16 | g |
| Bias stability | Allan variance (16g range, normal temperature) | 0.02 | mg | |
| 10 s average (-40 ℃ ~ + 80 ℃, constant temperature) | 0.03 | mg | ||
| Bias | Zero-bias range | 1 | mg | |
| Zero-bias variation over full temperature range | 1 | mg | ||
| Start repeatability | 0.2 | mg | ||
| Scale factor | Scale factor accuracy | 0.3 | % | |
| Scale factor nonlinearity | 0.02 | %FS | ||
| Speed random walk | - | 0.08 | m/s/√hr | |
| Bandwidth | - | 200 | Hz | |
| Communication interface | 1-way SR422 | Baud rate | 460.8 | MHz |
| Sampling frequency | UART | 1000 | Hz | |
| Electrical characteristics | Voltage | - | 5 | V |
| Power consumption | - | 1.5 | W | |
| Ripple | P-P | 150 | mV | |
| Structural characteristics | Size | - | 38.6×44.6×21.5 | mm |
| Weight | - | 65±2 | g | |
| Use environment | Operating temperature | - | -40~80 | ℃ |
| Storage temperature | - | -45~85 | ℃ | |
| Vibration | - | 20~2000Hz,6.06g | ||
| Impact | - | 6000g,0.5ms | ||
| Reliability | MTBF | - | 20000 | h |
| Continuous working time | - | 120 | h | |
The IMU300C-A0-IMU is an inertial measurement unit (IMU) based on micromachining technology (MEMS), with built-in high-performance MEMS gyroscope and MEMS accelerometer, outputting 3 angular velocities and 3 accelerations.
IMU300C-A0-IMU features high reliability and strong environmental adaptability. By matching different software, the product can be widely used in tactical and industrial UAV, smart ammunition, seeker and other fields.
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2001
Total Annual:
10000000-15000000
Employee Number:
60~100
Ecer Certification：
Verified Supplier
Shenzhen Fire Power Control Technology Co., Ltd. is a professional manufacturer specializing in the production of electronic products and inertial devices, and providing technical consultation and export services. The company has a strong independent team. The technical team is comp... Shenzhen Fire Power Control Technology Co., Ltd. is a professional manufacturer specializing in the production of electronic products and inertial devices, and providing technical consultation and export services. The company has a strong independent team. The technical team is comp...
Get in touch with us
Leave a Message, we will call you back quickly!