Wine Filling Line Juice Bottling Machine 0.2 Mpa - 0.4 Mpa Water
I. Description of project
Suitable bottle: glass bottle
II. List of Main equipment
|1||Bottle Rinser||GD-CP-12||2000 BPH||1|
|2||Wine filling machine||GD-FYG-12||2000 BPH||1|
|3||Corking machine||GD-DS-1||2000 BPH||1|
- The final equipment size and type should be adjusted according to
the fixed product.
- All the machines are designed according to the buyer’s can size.
- This line might be able to treat other sizes, though the relative
machines should add necessary parts or change to different design.
The undetermined details should be provided to the seller.
- The relevant technical parameters and machine design should be
finally confirmed after the estimate of seller, receiving all the
details and samples.
III. Main equipment introduction
1. 1.Bottle Raising and Washing Machine
It adopts continuously spraying and washing method. It is mainly
used to clean the glass bottles.
|Washing medium||Sterile water|
|Washing time||3 seconds|
|Drying time||2 seconds|
2.Wine filling machine
The wine filling machine is a Negative Pressure Filling Machine. It
is based on advanced technology. The equal liquid level technology
controls the filling. Its Principal features includes: Level
positioning accuracy, batter than the industry standard, non-drip,
tight and reliable seal. Broken bottles or none bottles not
filling, not spilling fluid, clean and hygiene. Automatic adapt the
error of the height of bottles, frequency conversion speed
regulator, soft start, soft-breaking, non-rigid impact, stability
and reliability working .It is the preferred equipment of the
3. Corking machine
This machine is specially used to seal the wine bottles by corks.
Its operation is very easy and convenient. No doubt it is the
necessary machine for the wine factory.
1, New structure, less breakdown, long working life, reliable
2, Motor speed controlled by electromagnetic, applicable to a wide
range of bottle height.
3, Apply mechanical linkage device, it will not plug the bottle
cork without bottle so as to save cork.
4. Labeler (Self-adhesive Three Labels Labeler)
GD-BTB-03 is specially designed for self-adhesive labels on glass
bottles. It is Specially used to stick the three labels: front,
back and neck labels. This machine is adopted the Germany label
sticking technology, have a very exact stick, stable work.
Main trait and advantage:
1. Reasonable mechanical structure. It is made by SUS304.Turning
control design of pallets meets the demand of label marking of
round bottles, square bottles, and various special-shaped bottles.
2. Highly automatic control system. The machine adopts Frequency
control, PLC control, touch screen dynamic display system, which is
equipped with internet module to achieve wide-range steady speed
control under internet control. The system includes the following
functions: Detection of lubrication pressure and flow, automatic
shut in scale-free on back and automatic shut at bottles' burst.
3. Bottles are conveyed to the machine in equal space and pass the
photo-sensor, which send single to the label roller and stick the
label on the bottle.
4. Advanced infrared detector to realize the precise sticking
5. Perfect lubrication system. The body machine is lubricated by
pumping oil to be prelubricated before working.