Normal items work well between -2℃ to 90℃.
1.Remove the valve core and fully deflate.
2.Invert and shake the bottle evenly, then take out the seal film.
3.Use the pipe to connect the bottle and the tire valve then press
the bottle to infuse tire sealant till suggested volume.
4.Clean up the valve, reinstall the valve core and inflate tire.
1.The puncture is over the working range.
Solution: Use other traditional ways, such as cold patch, cold bar glue,rubber strip.
2.The puncture is on the top/side of the tire where sealant can't
Solution: Use other traditional ways, such as cold patch, cold bar
3.The tire sealant isn't added according to suggested volume.
Solution:Add more sealant until the suggested volume.
4.The inner tube and the cover tire are unmatched.
Solution:Change to matched inner tube with the cover tire.
5.The tire sealant can't form plug to seal well because of low tire
Solution: Inflate the tire until attaining the standard tire pressure.
6.The old puncture punctures again, and the puncture is over the
Solution: Use other traditional ways to seal, or change new tire.
7.Old and bad quality tire will leak easily.
Solution: Change new tire.
8.The tire sealant can't form plug to seal well because of oil,
waxiness and powder in new tire.
Solution: Keep tire pressure and drive 2-4km.
9. The mixture of solids and liquid is not rational, can't infuse
into the tire completely.
Solution: Fully shake the tire sealant before infusing into the tire.
Always contact us with WhatsApp+8618158358661
Or visit our website at